search for: te212p

Hi all did anyone of you experience an error like "do_irq: stack overflow" in configuring a TE212P on Fedora core 6? The server immediately hangs, I don't know if this can be related to hardware configuration or kernel incompatibility... This problem arises when I try to configure the channels with the usual command "ztcfg" and it is strictly related to the presence of the echo can...

...er ztcfg -vv. The zaptel.conf file is like this: # #zaptel.conf # fxsks=1-24 span=1,0,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4 bchan=25-39,41-55 dchan=40 bchan=56-70,72-86 dchan=71 loadzone=nl defaultzone=nl (I have an TDM24P too, it works ok). In this moment the led of the first span of the TE212P is in RED (if no cable connected) or in GREEN (if a cable is conected), but the led of the second span is off. This is shown in a pri show span in the CLI (with no cable connected): pri show span 2 Primary D-channel: 40 Status: Provisioned, In Alarm, Down, Active Switchtype: EuroISDN Type: CPE W...

.....] VPM450: echo cancellation for 64 channels Failed to open chip, code 00103017! VPM450: Failed to initialize [...] By looking in the zaptel code, this error value (0x00103017) means cOCT6100_ERR_OPEN_EXTERNAL_MEM_BIST_FAILED. Is anyone familiar with that problem ? Thanks for your help. --- TE212P card: jumpers are set to E1 mode and nothing is connected to that card at the moment. # uname -a Linux ditti-voipa-serv-1 2.6.18-4-amd64 #1 SMP Fri May 4 00:37:33 UTC 2007 x86_64 GNU/Linux # cat /etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 span=2,1,0,ccs,hdb3,crc4 bc...

Hi: I want to have conference call with asterisknow and need 2 ports E1.Which Digium card is better?TE212 or TE220.I haven't problem with motherboard. Regards. --------------------------------- Get the Yahoo! toolbar and be alerted to new email wherever you're surfing. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anybody have Digium TE212P interface card on Dell PowerEdge 1850? I'm planning to install * on that configuration so I'm looking for any positive/negative experience. Best regards, -- Tomislav Par?ina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)270248 Mob.: +385(91)1212148 SIP: tomo@sip.lama.hr e-ma...

HI to All, I have an issue, when I connect a TDM04B and a TE212P on my server (Intel Entry Server board S3000AH) and boot RHEL4 the system launch this message: PCI: Unable to handle 64-bit address space for I think the problem is the TE212P because the TDM04B is detected as a Tiger Jet Network Modem. I have installed both cards in a PCI-X 64 bits Ing...

Hi Guys I'm configuring a TE212P card and have the following two entries in my /etc/asterisk/zapata.conf switchtype=dms100 signalling=pri_cpe When I reload asterisk I get the following messages: > -- Reloading module 'chan_zap.so' (Zapata Telephony) > == Parsing '/etc/asterisk/zapata.conf': Found &gt...

...do a "service zaptel stop" on my machine,sometimes it crash and i must unplug and plug the power cord to restart the machine. Also sometimes load zttranscode and wct4xxp, and oter times wct4xxp only... it's running centos 4.4, libpri 1.2.4, zaptel 1.2.17.1 and asterisk 1.2.18. with a TE212P. Can somebody help me? Regards.

Hi, We have a PRI connection & when its was on test networks we had echo problems withoutside line. So I bought a TE212P card resolve the echo problem. Which did to an extent. Its using asterisk 1.2.18 & RHEL4-Update 4. But now when we are live, there is a terrible echo between 2 SIP calls. If I call the same extension from outside the voice is clear. I am not sure whats the problem. Also there's slight...

Hi I am not sure why this is happening or whether it has anything to do with my iaxmodem setup. When receiving a fax via iaxmodem, I got an error message saying *chan_iax2.c:7542 socket_process: Call rejected by 127.0.0.1: Busy*

...t script didn't load the zttranscode module it will error out when trying to unload the modules. I built zaptel/asterisk/libpri (all latest releases as of May 3rd). I am also using the /etc/sysconfig/zaptel file to only specify the two modules I do need. wct4xxp and wctdm24xxp. I am using a TE212P and a TDM844B card. I shouldn't need the zttransode module since I don't have a codec translation card. right? To work around this I added zttranscode to RMODULES in the zaptel init script. If I don't need the zttranscode module. I may try and rebuild zaptel without it. -- *** For...

Hi all, i have been using asterisk for a few years but i am about to do my first t1 setup. After terrible quality issues between two business locations, we have decided to purchase a point to point t1 from the local phone co. The internet is too crappy, too much lag, queing and jitter. Most calls were dropped. I was about to order two cisco routers with csu cards and remembered our wonderful

Hi, I have a tdm22b (2 fxs / 2 fxo) When Asterisk is just started, outbound calls routing to fxo port, do not working with error: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) Inbound calls to fxo port work fine. After first inbound call, the outbound calls starts working. CentOS 5.4 asterisk 1.6.0.21-1 dahdi 2.2.1.-1 Can anybody help me to identify what is the

Sorry for this. This is most likely a HOWTO or FAQ question, but it's so much information and documentation to wade through so I hope someone could take a minute to answer anyway. If not, no worries. I'll get to it sooner or later :) I'm trying to understand what Asterisk actually is and the basic workings... I think I've understand what I need to get going, except one thing.

...d to a samsung pbx didn?t get problems. Would be glad if anybody put some light on it. By the way this is my configuration: Asterisk 10.5.0 (but also tried in 1.8 and 1.6 with the same results) HP ML110 G7 server lspci -v .. 0e:08.0 Communication controller: Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V (rev 02) Subsystem: Device 0003:0000 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at fbff0000 (32-bit, non-prefetchable) [size=128] Kernel driver in use: wct4xxp Kernel modules: wct4xxp .. cat /etc/dahdi/system.conf span=1,1,0,cas,hdb3 cas=1-15,...

Hi, I have Asterisk-1.2.18 install with FreePBX & more than 75 extnsion, daily I come accross an issue & try resolving them its either user learning curve or my ignorance. But, I dont know what to say regarding this issue. I have my Dial Plan for internal users to have a 3 Digit Extensions. So instance my Ext is 239 & someone dials the main #, its gets the