Hello,
Load wctdm with debug=1, i.e, add this line to /etc/modprobe.conf:
options wctdm debug=1
Then watch /var/log/messages (tail -f /var/log/messages will do it),
and check when you are getting the first polarity reversal, you should
get it before the first RING. If it happens that you get it when
asterisk answers, that would explain your problem.
BTW, is it a pstn line? or a gsm fct? If the later, you need to set it
up for proper hangup detection in asterisk.
Julian J. M.
On 3/7/06, Carlos Prieto <prieto.carlos@gmail.com>
wrote:> Hi !
>
> I have some issues, i don't know exactly if it's a busy detection
issue.
>
> When i dial into the Asterisk box, and if i hang up before the Asterisk
> answers with the IVR Welcome message, the Asterisk goes on with the call.
> But, if i wait for the Asterisk to answer, and if i hang up, the Asterisk
> hangs up too.
>
> I have this parameters on zapata.conf:
>
> busydetect=no
> answeronpolarityswitch=yes
> hanguponpolarityswitch=yes
> callprogress=no
>
>
> I've tested with different values por busydetect set t yes and several
> busycount values.
>
>
> I'm using Asterisk 1.2.4 and Zaptel 1.2.3 with a Digium TDM400P with 2
FXO
> modules and Kewl Start Signalling.
>
> Thanks in advance for the help.
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>