Displaying 20 results from an estimated 479 matches for "busydetect".
2003 Jun 08
3
busydetect and X100P hangups
FYI to anyone else who may be experiencing random hangups; I removed the
busydetect=yes lines from the conf files on my asterisk servers, and
haven't had a hangup since.
I had done that once before and it didn't seem to have much of an
effect, so I'm not breaking out the champagne yet. But so far over
dozens of calls both made and received since I took that line o...
2004 Jul 25
1
Busydetect problems
Hi guys.
I have a XP100P Clone , and the busydetect dont work for me..
PSTN---Asterisk---Sip---Asterisk----PBX
Any call from pstn side dont disconnect ... I have no disconnect supervision and busydetect dont work...
Please Help me.
Zapata.conf
[channels]
echocancel=yes
usecallerid=no
hidecallerid=no
rxgain=0.0
txgain=0.0
signalling=fxs_ks
call...
2003 Sep 26
1
X100P - Busydetect / calls being disconnected - Australia; tip.
...ll is answered, 5 quick chirps are sent
down the line. However, because of the bug in the Cisco 7960 causing the
first 1/2 a second or so of a conversation to be cut off - I didn't hear
these chirps and as such I didn't think of the next bit:
Basically, because I had busycount set to 3 and busydetect set to yes, these
chirps were being detected by the busydetect function and causing the call
to be disconnected. I raised the busycount to something safe (8) and this no
longer happened.
This has me worried for a while, especially as I'd just disconnected the old
PBX a few days ago and spent a...
2006 Feb 16
2
Random Hangups/Disconnects
Well, I thought and hoped my issue of random hangups on our TDM400P were
related to busydetect=yes in zapata.conf. The behavior of a call being
hungup has not changed, however, since setting the busydetect option to
'no'. Again, the only affected user is my loud talker...
What are some causes/solutions to seemingly random call disconnects on Zap
channels that people have seen? I hav...
2003 Jul 22
3
busydetect and random hangups
Hi,
I'm having random hangup problems with zap channels.
If I turn busydetect off in Zapata.conf, * fails completely to detect a
user hangup in the middle of a script.
On the other hand, if I turn it on, everything works much better, but
long calls tend to be hung up without a motive.
Any other parameter that I can try? Any #define that I can tweak and
recompile?
Wil...
2003 Jun 17
3
New busydetect routines for analog channels (FXO mostly)
Hello,
I've commited the new busydetect routine to CVS.
You need to cvs update asterisk of course and then choose it
in asterisk/Makefile and recompile asterisk.
All you X100P users that had the problems
with false hangups or the card not being able to detect the busy tone
please check that.
In the asterisk/Makefile you need to find a l...
2007 Feb 17
3
Problem with busydetect and cell phones
I have a very strange problem I'm hoping someone has encountered already.
I've scoured the internet for an answer to this one. My phone company
provides no disconnect supervision. Hence I'm forced to use the busydetect
feature. I have a TDM400 with two FXO ports. If I call from an internal
extension to a landline and then hangup the landline Asterisk detects the
busy signal correctly and clears the line. If I call from an internal
extension to a cell phone and then hangup the cell phone Asterisk will never...
2003 May 20
0
busydetect=yes shows answered call on originating caller hangup
simple setup... two * boxen, X100P in each
pots(1) --> ZAP/1 --> *(1) --> IAX2 --> *(2) --> ZAP/1 --> pots(2)
with busydetect=yes and callprogress=yes in zapata.conf, calling from
pots(1) through to pots(2) we get the following
-- Zap/1-1 is ringing
-- Zap/1-1 is ringing
etc, and if nobody picks up, then it timeouts and hangups, good
however, if during the ringing, pots(1), the calling party, hangups the
phone,...
2003 Nov 12
1
X100P random hangups.
I have a couple of X100P's in my system and while on calls they just randomly hang up for no reason.
I have tried messing with the busydetect and callprogress setting them to yes and no same and still random hangups. Is there another setting I should be looking at?
My zap config looks like.
context = inbound-work
include => extensions
signalling = fxs_ks
group = 1
callg...
2004 Oct 02
2
Patch: Inbound-only busydetect
Hi there,
I got really tired of false hangups, specially when someone calls from
SIP/IAX/whatever to PSTN, which makes no sense in using busydetect in
the zap channel, as the caller will eventually hear the busy tones and
hangup, causing the zap channel to be "freed" as well...
After suggesting that the busy detect be enabled only for inbound
calls, and finding other people that think like me, I decided to try
to do it.
I have no i...
2005 Jul 16
0
Hangup Detection with busydetect
My telco doesn't provide Disconnect Supervision or Polarity Change. So I
figured I have to detect hangups with busydetect=yes in zapata.conf.
I tested it. When the telco sends a busy tone * detects it and hangsup.
So far so good. The problem is the telco doesn't always send a busy
after remote hangup. Most of the time it sends a congestion tone. I am
guessing these tones from what I read on indications.conf....
2008 Jun 04
0
busydetect=yes, busycount=5: hangup automtically without reason, why?
Hi All;
Why busydetect=yes caused this autmatic hangup happens
without any reson (while responding to entering the
digits in the IVR) I do not know! And what is the
solution I do not know.
I used busydetect=yes and busycount=5 in zapata.conf
to help me in hangup when detect the busy tone, but I
faced the following probl...
2005 Mar 07
1
FXO module in TDM400P (UK, BT) - Hangup
Thanks for the suggestion. I have busydetect=yes in zapata.conf.
You refer to "Martin's algorithm". Can you provide more details please?
----- Original Message -----
From: "Soner Tari" <list@kulustur.org>
Subject: Re: [Asterisk-Users] FXO module in TDM400P (UK, BT) - Hangup
detection failing
To: "Asterisk...
2004 Dec 29
1
Can I tell if it hung up due to busydetect or disconnect supervision?
...e
line is offhook to the 47 volts when it is onhook.
But * would only recognize hangup if I unplugged the PSTN line. Otherwise
it would play my voicemail menu over and over if I hung up without choosing
an extension, good thing I put in a counter and did Hangup after a few
tries.
So, I turned on busydetect, and now disconnect works (I was surprised that
it worked right away, I didn't even need to find out where the busy signal
is defined, maybe the busy here is the same or close enough to the US tone),
but I was wondering, is there any way I can get the console to let me know
whether it disconnec...
2010 Jul 28
1
Why do Zaptel calls drop all of a sudden? Could busy detect be the problem?
Hi Guys,
I am getting a complain that call on analogue lines (Sangoam A400D) drops
all of a sudden. Here is what I see in logs:
[Jul 28 15:49:08] DEBUG[21438] dsp.c: ast_dsp_busydetect detected busy,
avgtone: 75, avgsilence 135
[Jul 28 15:49:08] VERBOSE[21438] logger.c: -- Executing
[h at macro-dialout-trunk:1] Macro("SIP/2111-b6a400b0", "hangupcall|") in new
stack
[Jul 28 15:49:08] VERBOSE[21438] logger.c: -- Executing
[s at macro-hangupcall:1] GotoIf...
2005 Mar 24
0
Re: [2] X100p problem
...n buffer handling...: Connection reset by peer
Asterisk cleanly ending (2).
----- Original Message -----
From: Alain MELIOT
To: asterisk@binarystorm.net
Sent: Thursday, March 24, 2005 6:00 PM
Subject: RE: [2] X100p problem
/etc/asterisk/zapata.conf use
callprogress=yes
and busydetect =yes
i had the same problem before and i fix it whit this in my zapata.conf and this in the Makefile
#BUSYDETECT = #-DBUSYDETECT
recompile all and i am happy know
-----Message d'origine-----
De : David Hill [mailto:asterisk@binarystorm.net]
Envoy? : jeudi 24 mars 2005...
2004 Jul 21
0
chan_capi busydetect
Hi,
I'm using asterisk as softphone for a certain application.
It uses chan_capi for PSDN connection and chan_oss and
the manager as user interface.
When calling someone, who is busy, I can hear at the
speaker the busy indication, but the manager command
"Status" still tells "Ringing" (chan_oss) or "Dialing"
(chan_capi) (until it times out).
Is chan_capi
2004 Aug 28
1
UK Disconnect supervision with TDM400P
...with OPERMODE=UK. All's working well, except if I get an
incoming call through my bt line, and the remote party hangs up, I get
approx 20secs of the bt line hungup tone before asterisk hangs up, which
leads (if nothing else) to the well documented 20secs of beep on vm problem
:)
I have tried: busydetect=yes / busycount=7 / other busycounts /
callprogess=yes but none of these make any difference. I have
loadzone/defaultzone=uk and country=uk in indications.conf and fxs_ks
signalling.
I've seen mention of the different BUSYDETECT flags in the * Makefile, but I
can't seem to find exactly wh...
2005 Mar 11
3
Droping calls
...d=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=no
echocancel=yes
echocancelwhenbridged=no
echotraining=yes
echotraining=800
;relaxdtmf=yes
rxgain=6.0
txgain=5.0
group=1
callgroup=1
pickupgroup=1
immediate=no
callerid=asreceived
amaflags=default
;accountcode=lss0101
busydetect=yes
busycount=4
;faxdetect=both
;faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
musiconhold=default
context=casa
channel => 1
context=intruder
language=sp
channel => 2
Can the echotraining be messing things? Do I need to enable callprogress or
something?
What do guys think?
Also, I...
2006 Mar 09
2
TDM11B Hang up detection not working in France ?
.../ 1
fxs ), 1 phone, 1 softphone
I'm in France
When someone from PSTN calls and hangs up before the call is answered,
internal extension keeps ringing until timeout occurs. PSTN line keeps
busy. Hangup detection doesn't work.
I've played with different paremeters (callprogress, busydetect,
busycount, hanguponpolarityswitch) without success.
I've googled around and it seems this problem is specific to France.
Is there any French people in this list that has a TDM11B that hangs up
correctly ?
regards
Pascal OFFREDO
___________________________________________________...