search for: busycount

Hi All; Why busydetect=yes caused this autmatic hangup happens without any reson (while responding to entering the digits in the IVR) I do not know! And what is the solution I do not know. I used busydetect=yes and busycount=5 in zapata.conf to help me in hangup when detect the busy tone, but I faced the following problem: While I am calling to the Asterisk PBX, and during the response for the IVR and enter the digits and the code, it hangup by it self (whout any reason). I do not if I have to increase the busycount...

...alling=yes transfer=yes canpark=yes cancallforward=yes callreturn=no echocancel=yes echocancelwhenbridged=no echotraining=yes echotraining=800 ;relaxdtmf=yes rxgain=6.0 txgain=5.0 group=1 callgroup=1 pickupgroup=1 immediate=no callerid=asreceived amaflags=default ;accountcode=lss0101 busydetect=yes busycount=4 ;faxdetect=both ;faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no musiconhold=default context=casa channel => 1 context=intruder language=sp channel => 2 Can the echotraining be messing things? Do I need to enable callprogress or something? What do guys think? Also, I had to bring...

...phone, 1 softphone I'm in France When someone from PSTN calls and hangs up before the call is answered, internal extension keeps ringing until timeout occurs. PSTN line keeps busy. Hangup detection doesn't work. I've played with different paremeters (callprogress, busydetect, busycount, hanguponpolarityswitch) without success. I've googled around and it seems this problem is specific to France. Is there any French people in this list that has a TDM11B that hangs up correctly ? regards Pascal OFFREDO _______________________________________________________________...

Hi Guys, I am getting a complain that call on analogue lines (Sangoam A400D) drops all of a sudden. Here is what I see in logs: [Jul 28 15:49:08] DEBUG[21438] dsp.c: ast_dsp_busydetect detected busy, avgtone: 75, avgsilence 135 [Jul 28 15:49:08] VERBOSE[21438] logger.c: -- Executing [h at macro-dialout-trunk:1] Macro("SIP/2111-b6a400b0", "hangupcall|") in new stack [Jul

...pening was, when the call is answered, 5 quick chirps are sent down the line. However, because of the bug in the Cisco 7960 causing the first 1/2 a second or so of a conversation to be cut off - I didn't hear these chirps and as such I didn't think of the next bit: Basically, because I had busycount set to 3 and busydetect set to yes, these chirps were being detected by the busydetect function and causing the call to be disconnected. I raised the busycount to something safe (8) and this no longer happened. This has me worried for a while, especially as I'd just disconnected the old PBX a...

Is anyone having/had a problem with a TDM400P card hanging up on STD outbound calls as soon as the called party answers. I'm guessing that * is responding to the STD pips in some way. -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just want a system that works, you choose Linux; when you

...All's working well, except if I get an incoming call through my bt line, and the remote party hangs up, I get approx 20secs of the bt line hungup tone before asterisk hangs up, which leads (if nothing else) to the well documented 20secs of beep on vm problem :) I have tried: busydetect=yes / busycount=7 / other busycounts / callprogess=yes but none of these make any difference. I have loadzone/defaultzone=uk and country=uk in indications.conf and fxs_ks signalling. I've seen mention of the different BUSYDETECT flags in the * Makefile, but I can't seem to find exactly what they do, or w...

...esf,b8zs bchan=1-23 dchan=24 span=2,0,0,esf,b8zs bchan=25-47 dchan=48 span=3,0,0,esf,b8zs bchan=49-71 dchan=72 span=4,0,0,esf,b8zs bchan=73-95 dchan=96 loadzone=us defaultzone=us ======================== zapata.conf ; ; Zapata telephony interface ; ; Configuration file [channels] busydetect=1 busycount=7 relaxdtmf=yes callerid=asreceived context=default signalling=pri_cpe usecallerid=yes transfer=yes echocancel=yes echocancelwhenbridged=yes switchtype=dms100 rxgain=0.0 txgain=0.0 immediate=no signalling=pri_cpe group=1 context=default channel => 1-23 busydetect=1 busycount=7 rel...

Hi, I'm having random hangup problems with zap channels. If I turn busydetect off in Zapata.conf, * fails completely to detect a user hangup in the middle of a script. On the other hand, if I turn it on, everything works much better, but long calls tend to be hung up without a motive. Any other parameter that I can try? Any #define that I can tweak and recompile? Will callprogress

...t;T400P->Asterisk->T400P->Adtran 750(L36 Firmware)->RAS Server. I have 4 Zap channels signalled FXO_KS to the 750 with FXS_LS channels, On-Hook messaging disabled, the rest defaults for the channels. In zapata.conf I've tried with both busydetect=>yes and busydetect=>no.... busycount=>6, busycount=>10, callprogress=>yes, callprogress=>no all combinations. The weird thing is, that if I forward the incoming call from the PRI out another channel on the PRI into a POTS line hooked into the RAS server, the connection is fine. In my view, that rules out the PRI and poi...

...Span 1: TE4/0/1 "TE410P (PCI) Card 0 Span 1" ; This T1 is attached to in-house CUST 3 System ; language=en rxwink=300 usecallerid=yes hidecallerid=no callwaiting=no usecallingpres=yes echocancel=yes echocancelwhenbridged=no echotraining=800 rxgain=0.0 txgain=0.0 immediate=no busydetect=no busycount=15 callprogress=no ;relaxdtmf=yes ;callerid=asreceived faxdetect=incoming signalling =>em_w group = 2 channel => 1-24 ; Span 2: TE4/0/2 "TE410P (PCI) Card 0 Span 2" ; This T1 is attached to inhouse CUST 10 System ; language=en rxwink=300 usecallerid=yes hidecallerid=no callwaiting...

Ok, is it me or do some of the commands just not work properly? I asked for mailboxstatus and got: Response: Success Message: Mailbox Status Mailbox: 1000 Waiting: 0 which is all well and good, except of course I have 2 messages waiting... which kinda means it only works, if you have 0 messages... (using voicemail not voicemail2) Andy

Hi there, I have a new asterisk working in New Zeland and everything is working well except when an incoming call to the PSTN hangs up, asterisk wont hang up the zap trunk (X100P). I have found this information: http://bugs.digium.com/bug_view_page.php?bug_id=0001474 Which discusses my problem and i have made sure that i have the latest info in the indications.conf as follows: [general]

...-ID: > <afa14ef00703150309k51b4bbd8ka239ca7e2ba08fb@mail.gmail.com > > Content-Type: text/plain; charset="iso-8859-1" > > Hi, > > Please discribe me how we define busy/hang/answer detection with PRI E1 > channels. > > Since busydetect, callprogress, busycount giving falts hangup and call > drops > what is the solution on PRI channels? > > -- > Thanks & Regards, > Vidura B. Senadeera. > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://lists.digium.com/pipermail/asterisk-users/a...

Hi, Mark. I'm posting a little patch that permits to set the busycount value in dsp (via chan_zap), for systems that have "busydetect=yes" in zapata.conf and have noticed sporadic hangup, caused by incorrect cadence detection during normal conversation. With this patch, it's possible to increase the busycount from 3 (default) to 5 (max, because DSP_HIST...

...ight. Today, we've had nothing but problems with it dropping calls. I installed the latest CVS of everything, and we've been getting random hangups. If I disable AGGRESSIVE_SUPPRESSOR, the random hangups seem to stop but we of course experience *really* bad echo. I have busydetect=yes and busycount=8, which has previously been working just fine with the X100Ps. Does anyone have an idea what's going on or how to fix it?

Hi List, I've got * randomly hanging up on inbound or outbound calls on zap channels. I use a Digitnetworks X100P clone card. Any idea of what might be happening? Cheers, Jean-Michel.

FYI to anyone else who may be experiencing random hangups; I removed the busydetect=yes lines from the conf files on my asterisk servers, and haven't had a hangup since. I had done that once before and it didn't seem to have much of an effect, so I'm not breaking out the champagne yet. But so far over dozens of calls both made and received since I took that line out, I

...roblems with an asterisk installation (Trixbox ver. 1.2.3). We have a customer which is receiving a lot o telephony traffic (more or less 1 call/2 min.); we are using a TDM400 board, with 3 PSTN lines configured and we have two big issues: - Calls are dropped during conversation (I have a busycount=8 from the initial value that was 4) - Sometimes when the user dials out, he hears the ringing tone but the line is already answered and the called party hears his voice while he's still hearing the ringing tone. How can I investigate those 2 problems in order to find what's happ...

...this error messagefrom Asterisk "CallerID returned with error on channel Zap/3-1" , causing all my zap channels to be busy. So, I cannot make any calls in, nor out. I am located in the United States. Is there any other suggestions, besides adding "busydetect= yes" and "busycount=8"? Any other suggestions would be appreciated. Thanks in advance. Here is what my zapata.conf looks like: [channels] ;context=telewest_pstn context=default switchtype=national signalling=fxs_ks rxwink=300 ; Atlas seems to use long (250ms) winks channel => 2-4 adsi=yes usec...