Hi,
Im working with the following versions:
-asterisk-1.2.12.1
-zaptel-1.2.9.1
And with the following card:
00:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
Subsystem: Unknown device 8085:0003
Flags: bus master, medium devsel, latency 32, IRQ 201
I/O ports at c800 [size=256]
Memory at fe000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Identified as:
*CLI> zap show status
Description Alarms IRQ bpviol
CRC4
Wildcard X101P Board 1 OK 0 0
0
And the following lines in zapata.conf(for spanish lines):
answeronpolarityswitch=yes
hanguponpolarityswitch=yes
The problem is that although the calls work correctly the system is
unable to detect a pstn hangup and it keeps running even when the
other side is calling to another number(not an asterisk ones, asterisk
line keeps busy)
Any hint?
Thanks for your time
--
Arkaitz
i'm having similar problems (if you find out the solution please post it) did you try enabling 'callprogress' or 'busydetect' in zapata.conf ? Maxi 2006/10/23, Arkaitz <arkaitzj@gmail.com>:> > Hi, > Im working with the following versions: > -asterisk-1.2.12.1 > -zaptel-1.2.9.1 > And with the following card: > 00:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX > Modem/ISDN interface > Subsystem: Unknown device 8085:0003 > Flags: bus master, medium devsel, latency 32, IRQ 201 > I/O ports at c800 [size=256] > Memory at fe000000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > > Identified as: > *CLI> zap show status > Description Alarms IRQ bpviol > CRC4 > Wildcard X101P Board 1 OK 0 0 > 0 > > And the following lines in zapata.conf(for spanish lines): > answeronpolarityswitch=yes > hanguponpolarityswitch=yes > > The problem is that although the calls work correctly the system is > unable to detect a pstn hangup and it keeps running even when the > other side is calling to another number(not an asterisk ones, asterisk > line keeps busy) > Any hint? > Thanks for your time > -- > Arkaitz > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061025/001feeaf/attachment.htm
> I've enabled those options but it's the same. > > On 10/25/06, Maxi Belino <maxi.belino@gmail.com> wrote: > > i'm having similar problems (if you find out the solution please post > it) > > > > did you try enabling 'callprogress' or 'busydetect' in zapata.conf ? > > > > Maxi > > > > 2006/10/23, Arkaitz <arkaitzj@gmail.com>: > > > > > > Hi, > > > Im working with the following versions: > > > -asterisk-1.2.12.1 > > > -zaptel-1.2.9.1 > > > And with the following card: > > > 00:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX > > > Modem/ISDN interface > > > Subsystem: Unknown device 8085:0003 > > > Flags: bus master, medium devsel, latency 32, IRQ 201 > > > I/O ports at c800 [size=256] > > > Memory at fe000000 (32-bit, non-prefetchable) [size=4K] > > > Capabilities: [40] Power Management version 2 > > > > > > Identified as: > > > *CLI> zap show status > > > Description Alarms IRQ > > bpviol > > > CRC4 > > > Wildcard X101P Board 1 OK 0 0 > > > 0 > > > > > > And the following lines in zapata.conf(for spanish lines): > > > answeronpolarityswitch=yes > > > hanguponpolarityswitch=yes > > > > > > The problem is that although the calls work correctly the system is > > > unable to detect a pstn hangup and it keeps running even when the > > > other side is calling to another number(not an asterisk ones, asterisk > > > line keeps busy) > > > Any hint? > > > Thanks for your time > > > -- > > > ArkaitzThere is a good bit of info on the web about this issue. http://www.voip-info.org/wiki-Asterisk+Disconnect+Supervision http://kb.digium.com/entry/1/6/ http://www.google.com/search?hl=en&lr=&q=asterisk+disconnect+supervision+ Bottom line, you have to call your service provider and get them to turn on "disconnect supervision" so Asterisk will properly detect the far-end hang-up. Depending on the service provider, what switch they use, and what part of the country you are in, this feature is called something different. Good Luck. JR