search for: hanguponpolarityswitch

I've just had polarity reversal provisioned by our telco to test hangup detect with a TDM400P I've set hanguponpolarityswitch=yes in zapata.conf When I start Asterisk I get "ignoring hanguponpolarityswitch" in /var/log/asterisk/messages I assume that the option is either not valid or conflicts with another setting somewhere. Any ideas?

There are a few mentions in the wiki [1] about a zapata.conf flag "hanguponpolarityswitch". It is meant to cause Asterisk to detect a hangup when the line polarity switches at the end of the call. The wiki mentions using the flag in zapata.conf but when I do Asterisk "ignores" it: Apr 12 17:59:38 WARNING[12804]: chan_zap.c:10875 setup_zap: Ignoring hanguponpolaritysw...

...i didnt add polarity reversal property but it still giving me on cosole that fxo number 4 is polarized (because the line on fxo number 4 is not polarized). what i want to do is to not let polarity reversal take effect on fxo number 4. that what i have in my zapata.conf: answeronpolarityswitch=yes hanguponpolarityswitch=yes signalling=fxs_ks context=wassim channel => 1-3 ; signalling=fxs_ks context=wassim channel => 4 Thanks in advance; _________________________________________________________________ Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! http://sp...

Afternoon, I was hoping someone could point me in the right direction. I have an asterisk PBX deployed in China using a TDM400P based card. The incoming calls are being picked up correctly, but are not being hung up. I suspect that this might be an issue with the signaling that has been selected. If anyone here has deployed asterisk in china using an analog card, it would be a great help

Hy, I'm working with asterisk 1.2.4 and zaptel 1.2.4 With these version an the options in zapata.conf: answeronpolarityswitch=yes hanguponpolarityswitch=yes I don't detect polarityswitch. When asterisk reloads I see in CLI: May 10 00:44:27 WARNING[14639]: chan_zap.c:10876 setup_zap: Ignoring answeronpolarityswitch May 10 00:44:27 WARNING[14639]: chan_zap.c:10876 setup_zap: Ignoring hanguponpolarityswitch May 10 00:44:27 WARNING[14639]: chan_z...

...rk properly in Sweden, and that works just fine. However, if the called or calling party hangs up after I hangup my SIP channel, polarity CID detection kicks in and dials a couple of signals to my incoming context. This happens with Asterisk 1.0.6 and CVS-HEAD. I have tried various combinations of hanguponpolarityswitch and answeronpolarityswitch (and without them). I'm sure this has been solved several times, but I can't seem to find it anywhere - any help appreciated :) My zapata.conf at the moment looks as follows: ;************************************************************************* ; zapata.co...

...er Management version 2 Identified as: *CLI> zap show status Description Alarms IRQ bpviol CRC4 Wildcard X101P Board 1 OK 0 0 0 And the following lines in zapata.conf(for spanish lines): answeronpolarityswitch=yes hanguponpolarityswitch=yes The problem is that although the calls work correctly the system is unable to detect a pstn hangup and it keeps running even when the other side is calling to another number(not an asterisk ones, asterisk line keeps busy) Any hint? Thanks for your time -- Arkaitz

...callerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=yes rxgain=0.0 txgain=0.0 immediate=no busydetect=yes busycount=4 ;busypattern=500,500 ;answeronpolarityswitch=yes ;hanguponpolarityswitch=yes ;callprogress=yes ;progzone=us channel => 3-4 _________________________________________________________________ Mortgage rates as low as 4.625% - Refinance $150,000 loan for $579 a month. Intro*Terms http://www.NexTag.com

...i/system.conf and chan_dahdi.conf. If I dial the port connected to the DID card it goes off hook but when the Executone winks Asterisk or the Adit thinks the remote side has hung up and terminates the call. I've tried using E&M wink, featd, and featb signalling in chan_dahdi.conf, set hanguponpolarityswitch=no, and tried loop start signalling for the heck of it and that didn't work either. Does anyone have any suggestions of additional things I could try? Thanks in advance, -Dave

...oftphone I'm in France When someone from PSTN calls and hangs up before the call is answered, internal extension keeps ringing until timeout occurs. PSTN line keeps busy. Hangup detection doesn't work. I've played with different paremeters (callprogress, busydetect, busycount, hanguponpolarityswitch) without success. I've googled around and it seems this problem is specific to France. Is there any French people in this list that has a TDM11B that hangs up correctly ? regards Pascal OFFREDO ___________________________________________________________________________ Nouveau :...

...s cancallforward=yes ;callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=yes echotraining=800 relaxdtmf=yes rxgain=3.0 txgain=3.0 callgroup=1 pickupgroup=1 ;immediate=no callerid=asreceived ;amaflags=default busydetect=yes busycount=8 ;busypattern=500,500 answeronpolarityswitch=no hanguponpolarityswitch=no faxdetect=both ; Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: FXO" ;;; line="1 XPP_FXO/0/0/0 FXSKS" signalling=fxs_ks callerid=asreceived group=1 context=from-zaptel channel => 1 When replacing callerid=phone-number I get on my ipphone phone-number as callerid: ; Span 1:...

...the Asterisk box, and if i hang up before the Asterisk answers with the IVR Welcome message, the Asterisk goes on with the call. But, if i wait for the Asterisk to answer, and if i hang up, the Asterisk hangs up too. I have this parameters on zapata.conf: busydetect=no answeronpolarityswitch=yes hanguponpolarityswitch=yes callprogress=no I've tested with different values por busydetect set t yes and several busycount values. I'm using Asterisk 1.2.4 and Zaptel 1.2.3 with a Digium TDM400P with 2 FXO modules and Kewl Start Signalling. Thanks in advance for the help. -------------- next part ----------...

...-5.13 HANGUP 3.0 (Occurs roughly every 10 seconds) WAIT: -5.13 HANGUP 3.0 (Occurs roughly every 10 seconds) - Asterisk times out and hangs up IDLE: -50.5 I'm using an ADIT 600 with a Tellabs Echo Canceller. Is there any logging for status on the line for monitoring? Turning on hanguponpolarityswitch=yes shows that the option is ignored. I've found in the archives that this works with fxs_ks. The error goes away when setting a line line for KS, but it still isn't working My zapata.conf below: [channels] context=incoming signalling=fxs_ls callprogress=no usecallerid=no callreturn=n...

...ke a outgoing call, a hear the ringing, and the peer phone ring, when the peer answer, asterisk hangup the call, or say busy. This is my conf: zaptel.conf: --------- loadzone = es defaultzone=es fxsks=1 zapata.conf ---------- [channels] signalling=fxs_ks busydetect=yes answeronpolarityswitch=yes hanguponpolarityswitch=yes callprogress=yes progzone=es context = contexto group = 1 channel => 1 And this is the asterisk log: -- Executing Dial("SIP/200-4803", "ZAP/1/966736800|90") in new stack -- Called 1/966736800 -- Hungup 'Zap/1-1' == Everyone is busy/congested at this...

...e a "Clack". I tryed diferents TDM cards and modules, and my zapata.conf is like, language=en context=from-zaptel switchtype=national usecallerid=yes callerid=asreceived transfer=yes callreturn=yes rxgain=-3.0 txgain=-3.0 immediate=no busydetect=yes busycount=8 answeronpolarityswitch=yes hanguponpolarityswitch=yes ringtimeout=8000 faxdetect=both group=0 signalling=fxs_ks channel => 7 think the problem is not by echo cause I use fxotune, and the problem persist. I made lots of TDM02B instalations and never get this kind of problem. Any clue will be welcomed. Thanks in advance. Regards VoipCrazy --...

...the following options: fxsks=2 fxoks=1 loadzone=se defaultzone=se And in /etc/asterisk/zapata.conf I've not sure what to set exactly. For example, under [trunkgroups] what to specify there? Under [channels I set something like the following: usecallerid=yes cidsignalling=dtmf cidstart=polarity hanguponpolarityswitch=yes signalling=fxs_ks context=default Any help would a be appreciated, many thanks! Christian

...0 usecallerid=no cidsignalling=dtmf hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no rxgain=6.0 txgain=2.0 group=0 immediate=no answeronpolarityswitch=yes hanguponpolarityswitch=yes faxdetect=both channel => 1-2 group=1 channel => 3-4 group=2 channel => 5-9 group=3 channel => 10-12 answeronpolarityswitch=no hanguponpolarityswitch=no Thanks, Vieri

I've got an old analog PBX and I'm trying to connect an FXO port on my asterisk server to one of the extensions on the old PBX. This should work as en extension on the old PBX should be providing dialtone, battery current and ring voltage. However, when the old PBX "hangs up" asterisk doesn't appear to be detecting the hangup (the DAHDI channel stays in use). Can anyone

...< beaasteriskguru at gmail.com> wrote: > hi, > > Although I changed those parameters. Asterisk does not detect "hangup > signal" > > > signalling = fxs_ks > busydetect = yes > busycount = 3 > busypattern = 500,500 > answeronpolarityswitch = no > hanguponpolarityswitch = yes > > callprogress=no > progzone=in > usecallerid=yes > cidstart=ring > callerid=asreceived > group=0 > context=from-pstn > channel => 1 > > by hearing attached tone anything can be done ? > > hope guidance from you, > ashik > > > On Fri, Ju...

...the call, he pay for the call. Any suggestion/hint is appraciated. Follow the configurations of zapata and zaptel: ; ; Zapata telephony interface [channels] ; ; Default language ; language=it ; ; Default context ; echocancel=yes echocancelwhenbridged=yes echotraining=400 rxgain=0.0 txgain=5.0 ;hanguponpolarityswitch=yes ;answeronpolarityswitch=yes group => 1 signalling=fxs_ks context = line-in channel=>1 # # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # fxsks=1 loadzone=it defaultzone=it