thr3ads.net - asterisk users - [Asterisk-Users] Configuring for outbound calls with PRI on T100P [Apr 2003]

If this information is useful, please help other people find it:
Share via:

DUSTIN WILDES

2003-Apr-09 12:56 UTC

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

I run a SIP-only shop with a 23 channel PRI and single T100P.
Here are my configs:

/etc/zaptel.conf:
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us


/etc/asterisk/zapata.conf
[channels]
context=default
switchtype=dms100
signalling=pri_cpe
pridialplan=unknown
rxwink=300              ; Atlas seems to use long (250ms) winks
usecallerid=no
hidecallerid=no
callwaiting=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=no
cancallforward=yes
callreturn=yes
echocancel=128
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
immediate=no
musiconhold=default
channel => 1-23

 -----Original Message-----
From: 	Ken McKittrick [mailto:klmac@usadatanet.net] 
Sent:	Wednesday, April 09, 2003 3:21 PM
To:	asterisk-users@lists.digium.com
Subject:	[Asterisk-Users] Configuring for outbound calls with PRI on T100P

Hello

I've got Asterisk running and accepting inbound calls. When I try to 
place an outbound call from a Cisco 7960 SIP phone, I get an immediate 
Fast Busy.

Does anyone have examples configurations for this?

Here's what I have in zapata.conf, extensions.conf is pretty much what 
came with the samples.

switchtype = national
signalling = pri_cpe
group = 1
channel => 1-16
;
context = local
swtichtype = national
signalling = pri_cpe
group = 2
channel = 17-23

Ken McKittrick



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users

Ken McKittrick

2003-Apr-09 13:37 UTC

head link

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

Dustin

Well, that's not it, must be something in the dialplan in 
extensions.conf.

Thanks
Ken

On Wednesday, April 9, 2003, at 03:56 PM, DUSTIN WILDES wrote:
> I run a SIP-only shop with a 23 channel PRI and single T100P.
> Here are my configs:
>
> /etc/zaptel.conf:
> span=1,0,0,esf,b8zs
> bchan=1-23
> dchan=24
> loadzone = us
> defaultzone=us
>
>
> /etc/asterisk/zapata.conf
> [channels]
> context=default
> switchtype=dms100
> signalling=pri_cpe
> pridialplan=unknown
> rxwink=300              ; Atlas seems to use long (250ms) winks
> usecallerid=no
> hidecallerid=no
> callwaiting=no
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=no
> cancallforward=yes
> callreturn=yes
> echocancel=128
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> group=1
> immediate=no
> musiconhold=default
> channel => 1-23
>
>  -----Original Message-----
> From: 	Ken McKittrick [mailto:klmac@usadatanet.net]
> Sent:	Wednesday, April 09, 2003 3:21 PM
> To:	asterisk-users@lists.digium.com
> Subject:	[Asterisk-Users] Configuring for outbound calls with PRI on 
> T100P
>
> Hello
>
> I've got Asterisk running and accepting inbound calls. When I try to
> place an outbound call from a Cisco 7960 SIP phone, I get an immediate
> Fast Busy.
>
> Does anyone have examples configurations for this?
>
> Here's what I have in zapata.conf, extensions.conf is pretty much what
> came with the samples.
>
> switchtype = national
> signalling = pri_cpe
> group = 1
> channel => 1-16
> ;
> context = local
> swtichtype = national
> signalling = pri_cpe
> group = 2
> channel = 17-23
>
> Ken McKittrick
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>

Mercer, Jay

2003-Apr-09 14:43 UTC

head link

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

Ken
I'd check with Ed or Chris and make sure that the Sonus is seeing and
atttempt frome the PRI. Also Get The packet sniffer on the box at look to see
whats going on in the sip messaging.
Jay

	-----Original Message----- 
	From: Ken McKittrick [mailto:klmac@usadatanet.net] 
	Sent: Wed 4/9/2003 4:37 PM 
	To: asterisk-users@lists.digium.com 
	Cc: 
	Subject: Re: [Asterisk-Users] Configuring for outbound calls with PRI on T100P
	
	

	Dustin
	
	Well, that's not it, must be something in the dialplan in
	extensions.conf.
	
	Thanks
	Ken
	
	On Wednesday, April 9, 2003, at 03:56 PM, DUSTIN WILDES wrote:
	
	> I run a SIP-only shop with a 23 channel PRI and single T100P.
	> Here are my configs:
	>
	> /etc/zaptel.conf:
	> span=1,0,0,esf,b8zs
	> bchan=1-23
	> dchan=24
	> loadzone = us
	> defaultzone=us
	>
	>
	> /etc/asterisk/zapata.conf
	> [channels]
	> context=default
	> switchtype=dms100
	> signalling=pri_cpe
	> pridialplan=unknown
	> rxwink=300              ; Atlas seems to use long (250ms) winks
	> usecallerid=no
	> hidecallerid=no
	> callwaiting=no
	> callwaitingcallerid=yes
	> threewaycalling=yes
	> transfer=no
	> cancallforward=yes
	> callreturn=yes
	> echocancel=128
	> echocancelwhenbridged=yes
	> rxgain=0.0
	> txgain=0.0
	> group=1
	> immediate=no
	> musiconhold=default
	> channel => 1-23
	>
	>  -----Original Message-----
	> From:         Ken McKittrick [mailto:klmac@usadatanet.net]
	> Sent: Wednesday, April 09, 2003 3:21 PM
	> To:   asterisk-users@lists.digium.com
	> Subject:      [Asterisk-Users] Configuring for outbound calls with PRI on
	> T100P
	>
	> Hello
	>
	> I've got Asterisk running and accepting inbound calls. When I try to
	> place an outbound call from a Cisco 7960 SIP phone, I get an immediate
	> Fast Busy.
	>
	> Does anyone have examples configurations for this?
	>
	> Here's what I have in zapata.conf, extensions.conf is pretty much what
	> came with the samples.
	>
	> switchtype = national
	> signalling = pri_cpe
	> group = 1
	> channel => 1-16
	> ;
	> context = local
	> swtichtype = national
	> signalling = pri_cpe
	> group = 2
	> channel = 17-23
	>
	> Ken McKittrick
	>
	>
	>
	> _______________________________________________
	> Asterisk-Users mailing list
	> Asterisk-Users@lists.digium.com
	> http://lists.digium.com/mailman/listinfo/asterisk-users
	>
	>
	>
	> _______________________________________________
	> Asterisk-Users mailing list
	> Asterisk-Users@lists.digium.com
	> http://lists.digium.com/mailman/listinfo/asterisk-users
	>
	
	_______________________________________________
	Asterisk-Users mailing list
	Asterisk-Users@lists.digium.com
	http://lists.digium.com/mailman/listinfo/asterisk-users
	

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 6922 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20030409/f009b235/attachment.bin

Kalin Dikov

2003-Apr-09 16:24 UTC

head link

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

>I run a SIP-only shop with a 23 channel PRI and single T100P.
>Here are my configs:
>
>/etc/zaptel.conf:
>span=1,0,0,esf,b8zs
>bchan=1-23
>dchan=24
>loadzone = us
>defaultzone=us
>
>
>/etc/asterisk/zapata.conf
>[channels]
>context=default
>switchtype=dms100
>signalling=pri_cpe
>pridialplan=unknown
>rxwink=300              ; Atlas seems to use long (250ms) winks
>usecallerid=no
>hidecallerid=no
>callwaiting=no
>callwaitingcallerid=yes
>threewaycalling=yes
>transfer=no
>cancallforward=yes
>callreturn=yes
>echocancel=128
>echocancelwhenbridged=yes
>rxgain=0.0
>txgain=0.0
>group=1
>immediate=no
>musiconhold=default
>channel => 1-23
>
> -----Original Message-----
>From: 	Ken McKittrick [mailto:klmac@usadatanet.net]
>Sent:	Wednesday, April 09, 2003 3:21 PM
>To:	asterisk-users@lists.digium.com
>Subject:	[Asterisk-Users] Configuring for outbound calls with PRI on
T100P>
>Hello
>
>I've got Asterisk running and accepting inbound calls. When I try to
>place an outbound call from a Cisco 7960 SIP phone, I get an immediate
>Fast Busy.
>
>Does anyone have examples configurations for this?
>
>Here's what I have in zapata.conf, extensions.conf is pretty much what
>came with the samples.
>
>switchtype = national
>signalling = pri_cpe
>group = 1
>channel => 1-16
>;
>context = local
>swtichtype = national
>signalling = pri_cpe
>group = 2
>channel = 17-23
>
>Ken McKittrick
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
------------------
Kalin Dikov
technical manager
IPPN Networks LTD
http://ippn.net
------------------

Kalin Dikov

2003-Apr-09 16:24 UTC

head link

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

>I run a SIP-only shop with a 23 channel PRI and single T100P.
>Here are my configs:
>
>/etc/zaptel.conf:
>span=1,0,0,esf,b8zs
>bchan=1-23
>dchan=24
>loadzone = us
>defaultzone=us
>
>
>/etc/asterisk/zapata.conf
>[channels]
>context=default
>switchtype=dms100
>signalling=pri_cpe
>pridialplan=unknown
>rxwink=300              ; Atlas seems to use long (250ms) winks
>usecallerid=no
>hidecallerid=no
>callwaiting=no
>callwaitingcallerid=yes
>threewaycalling=yes
>transfer=no
>cancallforward=yes
>callreturn=yes
>echocancel=128
>echocancelwhenbridged=yes
>rxgain=0.0
>txgain=0.0
>group=1
>immediate=no
>musiconhold=default
>channel => 1-23
>
> -----Original Message-----
>From: 	Ken McKittrick [mailto:klmac@usadatanet.net]
>Sent:	Wednesday, April 09, 2003 3:21 PM
>To:	asterisk-users@lists.digium.com
>Subject:	[Asterisk-Users] Configuring for outbound calls with PRI on
T100P>
>Hello
>
>I've got Asterisk running and accepting inbound calls. When I try to
>place an outbound call from a Cisco 7960 SIP phone, I get an immediate
>Fast Busy.
>
>Does anyone have examples configurations for this?
>
>Here's what I have in zapata.conf, extensions.conf is pretty much what
>came with the samples.
>
>switchtype = national
>signalling = pri_cpe
>group = 1
>channel => 1-16
>;
>context = local
>swtichtype = national
>signalling = pri_cpe
>group = 2
>channel = 17-23
>
>Ken McKittrick
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
------------------
Kalin Dikov
technical manager
IPPN Networks LTD
http://ippn.net
------------------

DUSTIN WILDES

2003-Apr-09 18:06 UTC

head link

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

Only problem is if a user takes longer than 5 seconds to dial the number.
Here's a copy of my dialplan.xml if it helps:

<DIALTEMPLATE>
  <TEMPLATE MATCH="0"   Route="Default"   
Timeout="1"    User="Phone"/>    <!-- Local operator
-->
  <TEMPLATE MATCH="9,011*"   Route="Default"   
Timeout="6"    User="Phone"/>    <!-- International
calls -->
  <TEMPLATE MATCH="9,0"   Route="Default"   
Timeout="8"    User="Phone"/>    <!-- PSTN Operator
-->
  <TEMPLATE MATCH="9,11"   Route="EMERGENCY"   
Timeout="0"    User="Phone"  Rewrite="9911"/>  
<!--  -->
  <TEMPLATE MATCH="w!"   Route="EMERGENCY"   
Timeout="1"    User="PHONE"  Rewrite="9911"/>  
<!--  -->
  <TEMPLATE MATCH="9,.11"   Route="Default"   
Timeout="0"    User="Phone"/>    <!-- Service numbers
-->
  <TEMPLATE MATCH="9,1.........."   Route="Default"   
Timeout="0"    User="Phone"/>    <!-- Long Distance
-->
  <TEMPLATE MATCH="9,......."   Route="Default"   
Timeout="0"    User="Phone"/>    <!-- Local numbers
-->
  <TEMPLATE MATCH="1..."   Route="Default"   
Timeout="0"    User="Phone"/>    <!-- Corporate Dial
plan -->
  <TEMPLATE MATCH="2..."   Route="Default"   
Timeout="0"    User="Phone"/>    <!-- Corporate Dial
plan -->
  <TEMPLATE MATCH="7..."   Route="Default"   
Timeout="0"    User="Phone"/>    <!-- Corporate Dial
plan -->
  <TEMPLATE MATCH="71.."   Route="Default"   
Timeout="0"    User="Phone"/>    <!-- Corporate Dial
plan -->
  <TEMPLATE MATCH="*"   Route="Default"   
Timeout="15"/>    <!-- Anything else -->
</DIALTEMPLATE>

 -----Original Message-----
From: 	John Todd [mailto:jtodd@loligo.com] 
Sent:	Wednesday, April 09, 2003 8:21 PM
To:	asterisk-users@lists.digium.com
Subject:	Re: [Asterisk-Users] Configuring for outbound calls with PRI on T100P

I also find that dialplans on the phone tend to screw things up. 
Phones should be fairly stupid, but people keep trying to make them 
smart.  My dialplan on my 7960's looks like this:

<DIALTEMPLATE>
     <TEMPLATE MATCH="*"            Timeout="5"/>
<!-- Anything else -->
</DIALTEMPLATE>

That's it!  The user types a phone number, waits five seconds (or 
hits the "#" key, or hits the "dial" button) and the
Asterisk server
handles the call.

JT


>On Wed, 09 Apr 2003, Ken McKittrick wrote:
>
>>  I've got Asterisk running and accepting inbound calls. When I try
to
>>  place an outbound call from a Cisco 7960 SIP phone, I get an immediate
>>  Fast Busy.
>>
>>  Does anyone have examples configurations for this?
>>
>>  Here's what I have in zapata.conf, extensions.conf is pretty much
what
>>  came with the samples.
>
>With the 79x0 units, I often find the problem is in the dialplan.xml
>that you are serving on the tftp server.
>
>You need to have something like:
><TEMPLATE MATCH="9,1.........." Timeout="0"
User="Phone"/>
><TEMPLATE MATCH="9,.........." Timeout="0"
User="Phone"/>
>
>I also have this line to dial internal extensions (all are 2xx):
><TEMPLATE MATCH="2.."           Timeout="0"
User="Phone"/>
>
>michael.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users

George Lin

2003-Jun-01 18:02 UTC

head link

[Asterisk-Users] Channel Banks

Hello all,

Can someone point me where I can buy a E1 channel bank ( incluidng model and
vendors ) which is compatible with digium E400P card.

Thanks,

George Lin

-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Steven
Critchfield
Sent: Thursday, April 10, 2003 9:20 AM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Channel Banks


On Thu, 2003-04-10 at 10:37, Jon Pounder wrote:> Anyone on the list actually tried one of those fxs/fxo converter boxes
with> a channel bank ?
> If so how was it ?
I seem to remember someone recently offering up free british toll free
access via an ata186 and a box either the same one mentioned here or
similar on the FWD list. If you browse the archives there you should see
what people thought of the experience, and/or contact the person to see
what type of longer term satisfaction they had.
--
Steven Critchfield  <critch@basesys.com>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users

Reasonably Related Threads

Search for more apparently analagous threads

asterisk users - Apr 2003 - Configuring for outbound calls with PRI on T100P

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

[Asterisk-Users] Configuring for outbound calls with PRI on T100P

[Asterisk-Users] Channel Banks

Reasonably Related Threads