Displaying 20 results from an estimated 541 matches for "pri_cp".
Did you mean:
pri_cpe
2007 Jul 30
7
Zaptel channel reservation
Hi all,
I have a Wildcard TE110P connected to a E1 line an I want to reserve
channels in the following way:
channels 1-15 and 17-21 for incoming calls
channels 22-28 for outgoing calls
channels 29-31 for emergency calls
My zaptel.conf looks like this:
; incoming
group = 1
signalling=pri_cpe
context=from-zaptel
channel => 1-15
channel => 17-21
; outgoing
group = 2
signalling=pri_cpe
channel => 22-28
; emergency
group = 3
signalling=pri_cpe
channel => 29-31
How can I avoid that incoming calls are going to the channels 22-31?
Regards, Jack
2009 May 23
1
1.6.0.9: Unknown signalling method 'pri_cpe' ??
I'm trying to upgrade from 1.4.24.1 to 1.6.0.9 with a TE120P card.
I can't make any connection over the T1.
From CLI:
ERROR[26017]: chan_dahdi.c:14300 process_dahdi: Unknown signalling
method 'pri_cpe' at line 37.
cat chan_dahdi.conf
cat chan_dahdi.conf
[trunkgroups]
[channels]
language=en
;internationalprefix = 00
;nationalprefix = 0
context=from-pstn
switchtype=national
pridialplan=local
;priindication=outofband
usecallerid=yes
callerid=asreceived
hidecallerid=no
callwaiting=yes
;usec...
2006 Jan 05
3
TE110p and pri_cpe signalling not recognized
...inux26 as well checked I on the udev configs.
zttool and ztcfg both indicate that the card is ready.
But when I try to "load chan_zap.so" then I get the following
Unable to load module chan_zap.so
Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown
signalling method 'pri_cpe'
Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must
be specified before any channels are.
Jan 5 21:43:33 WARNING[6808]: loader.c:414 __load_resource:
chan_zap.so: load_module failed, returning -1
My config is here below.
TIA
Arnar Gestsson
/etc/zaptel.conf
span=1,1...
2008 Jun 10
4
Problems configuring a PRI...
I'm trying to get a Qwest PRI configured and working with my lab
Asterisk server. They said that the switchtype is 5ess and the signaling
is pri_cpe. My entries into zaptel.conf are:
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us
channels=1-23
And my entries in zapata.conf are:
language=en
context=telco-incoming
switchtype=5ess
signalling=pri_cpe
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=no...
2006 Feb 27
0
TE411P problem-- probably stupid.
...0,0,esf,b8zs
bchan=49-71
dchan=72
span=4,0,0,esf,b8zs
bchan=73-95
dchan=96
loadzone=us
defaultzone=us
========================
zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[channels]
busydetect=1
busycount=7
relaxdtmf=yes
callerid=asreceived
context=default
signalling=pri_cpe
usecallerid=yes
transfer=yes
echocancel=yes
echocancelwhenbridged=yes
switchtype=dms100
rxgain=0.0
txgain=0.0
immediate=no
signalling=pri_cpe
group=1
context=default
channel => 1-23
busydetect=1
busycount=7
relaxdtmf=yes
callerid=asreceived
context=default
signalling=pri_cpe
usecalle...
2004 Apr 30
1
Configuring Digium TE405P for use in Germany
Hello all,
I really checked voip-info.org but it still seems to be not very easy and I
just hope that there is anybody with a simular config.
We have one PRI (euroisdn with 30 channels) coming from the DTAG. The second
PRI should be connected to a Siemens Hicom 150E Pro Office PBX (was cheaper
than a channel bank :-)
Carrier ----S2M------ * -----S2M------Siemens
|
|
2004 Jul 29
6
Zaptel doesn't see remote hangup ? euro-isdn
...yet
# Span 1
bchan=1-15
dchan=16
bchan=17-31
# Span 2
bchan=32-46
dchan=47
bchan=48-62
# Span 3
bchan=63-77
dchan=78
bchan=79-93
# Span 4
bchan=94-108
dchan=109
bchan=110-124
alaw=1-124
loadzone=uk
defaultzone=uk
/etc/asterisk/zapata.conf
[channels]
context=default
switchtype=euroisdn
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=yes
rxgain=0.0
txgain=0.0
immediate=no
; Channels inherit configuration above them
; Span 1
group=1
signalling=pri_cpe
channel => 1-15
channel => 17-31
; Sp...
2006 Feb 19
1
[slackware 10.2 and TE205P] Unknown signalling method 'pri_cpe'
...30 TE2/0/1/30 Clear
31 TE2/0/1/31 Clear
the problem is that when i strars asterisk with asterisk -cvvvv
[chan_zap.so] => (Zapata Telephony)
== Parsing '/etc/asterisk/zapata.conf': Found
Jan 2 00:16:57 ERROR[2059]: chan_zap.c:10606 setup_zap: Unknown
signalling method 'pri_cpe'
Jan 2 00:16:57 ERROR[2059]: chan_zap.c:10231 setup_zap: Signalling
must be specified before any channels are.
Jan 2 00:16:57 WARNING[2059]: loader.c:414 __load_resource:
chan_zap.so: load_module failed, returning -1
Jan 2 00:16:57 WARNING[2059]: loader.c:554 load_modules: Loading
module ch...
2006 Mar 13
0
Spam? Re: Unknown signalling method 'pri_cpe'
...Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kevin
Bockman
Sent: Monday, March 13, 2006 8:55 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Spam? Re: [Asterisk-Users] Unknown signalling method 'pri_cpe'
Hall, Eric M. wrote:
> [chan_zap.so] => (Zapata Telephony)
> Mar 13 20:44:26 ERROR[10829]: chan_zap.c:10598 setup_zap: Unknown
> signalling method 'pri_cpe'
Follow the correct order in installing Asterisk as shown on the download
page at http://www.asterisk.org
zaptel...
2011 Feb 17
1
Setting two E1 cards
Dear, I always had one E1 card with one span, so I've never had any
problem in set it up through /etc/dahdi/sustem.conf and
/etc/asterisk/chan_dahdi.conf because I put span=1.
But now I have a PBX with two E1 cards with 4 span (8 span in total).
How do I have to define both card in system.conf and chan_dahdi.conf,
and how do I have to refer each span to the corresponding card ???
Thanks a
2006 Mar 13
2
Unknown signalling method 'pri_cpe'
Anyone have any idea what this is talking about.
Here is my zapata.conf
[channels]
switchtype=5ess
signalling=pri_cpe
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
callerid=asreceived
group=1
context=default
musiconhold=default
faxdetect=incoming
channel => 1-23
Here is my zaptel.conf
span=1,1,0,esf,b8zs
bchan=1-23 # set this to 1-15,17-31 for E1
dchan=24 # set this to 16 for E1
defaultzone=us...
2003 Apr 09
6
Configuring for outbound calls with PRI on T100P
I run a SIP-only shop with a 23 channel PRI and single T100P.
Here are my configs:
/etc/zaptel.conf:
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us
/etc/asterisk/zapata.conf
[channels]
context=default
switchtype=dms100
signalling=pri_cpe
pridialplan=unknown
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=no
hidecallerid=no
callwaiting=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=no
cancallforward=yes
callreturn=yes
echocancel=128
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
immedia...
2007 Aug 24
1
TE120P digium card PRI_CPE error
Dear all
I got one more error my asterisk E1 card connected with avaya E1 card
[avaya]-------E1-----[asterisk]
i got this 2 error what is start asteris on consol mode
asterisk -vvvvc
[Jul 27 09:51:29] WARNING[737] chan_zap.c: PRI Error on span 0: We think we're the CPE, but they think they're the CPE too.
[Jul 27 09:51:30] WARNING[737] chan_zap.c: PRI Error on
2007 Aug 24
2
TE210P digim card PRI problem
Dear all
I have now install TE210P 2 port E1 card on asterisk 1.4.10 on centOS 5 but thing is that i have connect 1 E1 port with avaya E1 back 2 back and second E1 card on Direct Telcom for outgoing for outside now i got this error when i call on avaya PRI
asterisk think PRI_CPE and remote end also CPE
i have configure /etc/zaptel.conf
span=1,1,0,ccs,hdb3
bchan=1-15,17-32
dchan=16
span=1,1,0,ccs,hdb3
bchan=32-46,49-62
dchan=47
in /etc/asterisk/zapata.conf
switchtype=qsig
context=zap-in
signalling=pri_cpe
group=1
channel => 1-15,17-3...
2013 Feb 05
2
dahdi-channels.conf parameters
...s.conf
and since our PRI is fairly simple (just dump all the channels into one
group) it works with dialing with dahdi/g1/(number). I'm trying to
understand the file though for my own reference.
It seems the file looks like this:
group=0,11
context=from-pstn
switchtype = national
signalling = pri_cpe
channel => 1-23
context = default
group = 63
So what I don't get is why group is specified with 0,11. Is that groups
0 and groups 11? And then it has a random group = 63 at the end. And I
dial with group 1 (dahdi/g1), but it seems to work? :) It's completely
confused me as to why this...
2005 Oct 04
2
Quad PRI Problems
...none
usecallerid=yes
callerid=asreceived
threewaycalling=yes
transfer=yes
signalling=featd ; FXS for ringing phones
group=0
flash=350
rxwink=300
prewink=20~~
echocancel=no ; You can set this to 32, 64, or 128, tweak to your needs.
echocancelwhenbridged=no
immediate=no
channel => 1-24
signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master
switchtype=national
pridialplan=unknown
echocancel=yes ; You can set this to 32, 64, or 128, tweak to your
needs.
echocancelwhenbridged=no
echotraining=400 ; Asterisk trains to the beginning of the call, number
is in milliseconds
group=1
context=from-p...
2018 Dec 04
2
DAHDI fax detection
...plan. "dahdi show channel 1" shows "Fax Handled: no". Does that
mean that I don't have it configured correctly?
[channels]
; Span 1: WCTE2/0/1 "WCTE23X (PCI) Card 0 Span 1" (MASTER) ESF/B8ZS RED
group=10,11
context=from-pstn
switchtype = national
signalling = pri_cpe
faxdetect=incoming
faxdetect_timeout=0
faxbuffers => 12,half
channel => 1-23
; Span 2: WCTE2/0/2 "WCTE23X (PCI) Card 0 Span 2" ESF/B8ZS RED
group=10,12
context=from-pstn
switchtype = national
signalling = pri_cpe
channel => 25-47
--
Mitch
2004 May 28
9
* as pri_net?
If you have used * to support a pri as pri_net (as opposed to pri_cpe),
either to talk to another * system or a PBX of some sort, I would be very
interested in hearing about your experiences. Imparticular, I would like
to know that it works before I invest in the extra hardware.
TIA
Bruce Komito
High Sierra Networks, Inc.
www.servers-r-us.com
(775) 284-5800 ext 1...
2007 Apr 24
1
TE412P (T1/E1+DSP) digium card cause server crash
...reewaycalling=yes
transfer=yes
cancallforward=no
callreturn=yes
musiconhold=default
overlapdial=no
relaxdtmf=yes
immediate=no
; Echo Setting
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=2
txgain=-2
context=fxo_incoming
;### Span: 1 (E1_4) Board 1
switchtype=euroisdn
signalling=pri_cpe
group=1
channel => 1-15
channel => 17-31
;### Span: 2 (E1_4) Board 1
switchtype=euroisdn
signalling=pri_cpe
group=1
channel =32-467
channel =48-62
;### Span: 3 (E1_4) Board 1
switchtype=euroisdn
signalling=pri_cpe
group=1
channel =63-77
channel =79-93
;### Span: 4 (E1_4) Board 1
switchtype=e...
2004 Aug 12
5
Question about TE405P
...=4,0,1,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
zapata.conf
[channels]
context=default
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
language=en
immediate=no
channel => 1-15,17-31
channel => 1-15,17-31
channel => 1-15,17-31
channel => 1-15,17-31
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than o...