search for: pri_cpe

Hi all, I have a Wildcard TE110P connected to a E1 line an I want to reserve channels in the following way: channels 1-15 and 17-21 for incoming calls channels 22-28 for outgoing calls channels 29-31 for emergency calls My zaptel.conf looks like this: ; incoming group = 1 signalling=pri_cpe context=from-zaptel channel => 1-15 channel => 17-21 ; outgoing group = 2 signalling=pri_cpe channel => 22-28 ; emergency group = 3 signalling=pri_cpe channel => 29-31 How can I avoid that incoming calls are going to the channels 22-31? Regards, Jack

I'm trying to upgrade from 1.4.24.1 to 1.6.0.9 with a TE120P card. I can't make any connection over the T1. From CLI: ERROR[26017]: chan_dahdi.c:14300 process_dahdi: Unknown signalling method 'pri_cpe' at line 37. cat chan_dahdi.conf cat chan_dahdi.conf [trunkgroups] [channels] language=en ;internationalprefix = 00 ;nationalprefix = 0 context=from-pstn switchtype=national pridialplan=local ;priindication=outofband usecallerid=yes callerid=asreceived hidecallerid=no callwaiting=yes ;useca...

...inux26 as well checked I on the udev configs. zttool and ztcfg both indicate that the card is ready. But when I try to "load chan_zap.so" then I get the following Unable to load module chan_zap.so Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown signalling method 'pri_cpe' Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must be specified before any channels are. Jan 5 21:43:33 WARNING[6808]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 My config is here below. TIA Arnar Gestsson /etc/zaptel.conf span=1,1,...

I'm trying to get a Qwest PRI configured and working with my lab Asterisk server. They said that the switchtype is 5ess and the signaling is pri_cpe. My entries into zaptel.conf are: span=1,0,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us channels=1-23 And my entries in zapata.conf are: language=en context=telco-incoming switchtype=5ess signalling=pri_cpe rxwink=300 usecallerid=yes hidecallerid=no callwaiting=no...

...0,0,esf,b8zs bchan=49-71 dchan=72 span=4,0,0,esf,b8zs bchan=73-95 dchan=96 loadzone=us defaultzone=us ======================== zapata.conf ; ; Zapata telephony interface ; ; Configuration file [channels] busydetect=1 busycount=7 relaxdtmf=yes callerid=asreceived context=default signalling=pri_cpe usecallerid=yes transfer=yes echocancel=yes echocancelwhenbridged=yes switchtype=dms100 rxgain=0.0 txgain=0.0 immediate=no signalling=pri_cpe group=1 context=default channel => 1-23 busydetect=1 busycount=7 relaxdtmf=yes callerid=asreceived context=default signalling=pri_cpe usecaller...

Hello all, I really checked voip-info.org but it still seems to be not very easy and I just hope that there is anybody with a simular config. We have one PRI (euroisdn with 30 channels) coming from the DTAG. The second PRI should be connected to a Siemens Hicom 150E Pro Office PBX (was cheaper than a channel bank :-) Carrier ----S2M------ * -----S2M------Siemens | |

...yet # Span 1 bchan=1-15 dchan=16 bchan=17-31 # Span 2 bchan=32-46 dchan=47 bchan=48-62 # Span 3 bchan=63-77 dchan=78 bchan=79-93 # Span 4 bchan=94-108 dchan=109 bchan=110-124 alaw=1-124 loadzone=uk defaultzone=uk /etc/asterisk/zapata.conf [channels] context=default switchtype=euroisdn signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes echocancel=yes rxgain=0.0 txgain=0.0 immediate=no ; Channels inherit configuration above them ; Span 1 group=1 signalling=pri_cpe channel => 1-15 channel => 17-31 ; Spa...

...30 TE2/0/1/30 Clear 31 TE2/0/1/31 Clear the problem is that when i strars asterisk with asterisk -cvvvv [chan_zap.so] => (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf': Found Jan 2 00:16:57 ERROR[2059]: chan_zap.c:10606 setup_zap: Unknown signalling method 'pri_cpe' Jan 2 00:16:57 ERROR[2059]: chan_zap.c:10231 setup_zap: Signalling must be specified before any channels are. Jan 2 00:16:57 WARNING[2059]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 Jan 2 00:16:57 WARNING[2059]: loader.c:554 load_modules: Loading module cha...

...Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kevin Bockman Sent: Monday, March 13, 2006 8:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Spam? Re: [Asterisk-Users] Unknown signalling method 'pri_cpe' Hall, Eric M. wrote: > [chan_zap.so] => (Zapata Telephony) > Mar 13 20:44:26 ERROR[10829]: chan_zap.c:10598 setup_zap: Unknown > signalling method 'pri_cpe' Follow the correct order in installing Asterisk as shown on the download page at http://www.asterisk.org zaptel,...

Dear, I always had one E1 card with one span, so I've never had any problem in set it up through /etc/dahdi/sustem.conf and /etc/asterisk/chan_dahdi.conf because I put span=1. But now I have a PBX with two E1 cards with 4 span (8 span in total). How do I have to define both card in system.conf and chan_dahdi.conf, and how do I have to refer each span to the corresponding card ??? Thanks a

Anyone have any idea what this is talking about. Here is my zapata.conf [channels] switchtype=5ess signalling=pri_cpe echocancel=yes echocancelwhenbridged=yes echotraining=400 callerid=asreceived group=1 context=default musiconhold=default faxdetect=incoming channel => 1-23 Here is my zaptel.conf span=1,1,0,esf,b8zs bchan=1-23 # set this to 1-15,17-31 for E1 dchan=24 # set this to 16 for E1 defaultzone=us...

I run a SIP-only shop with a 23 channel PRI and single T100P. Here are my configs: /etc/zaptel.conf: span=1,0,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us /etc/asterisk/zapata.conf [channels] context=default switchtype=dms100 signalling=pri_cpe pridialplan=unknown rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=no hidecallerid=no callwaiting=no callwaitingcallerid=yes threewaycalling=yes transfer=no cancallforward=yes callreturn=yes echocancel=128 echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 immediat...

Dear all I got one more error my asterisk E1 card connected with avaya E1 card [avaya]-------E1-----[asterisk] i got this 2 error what is start asteris on consol mode asterisk -vvvvc [Jul 27 09:51:29] WARNING[737] chan_zap.c: PRI Error on span 0: We think we're the CPE, but they think they're the CPE too. [Jul 27 09:51:30] WARNING[737] chan_zap.c: PRI Error on

Dear all I have now install TE210P 2 port E1 card on asterisk 1.4.10 on centOS 5 but thing is that i have connect 1 E1 port with avaya E1 back 2 back and second E1 card on Direct Telcom for outgoing for outside now i got this error when i call on avaya PRI asterisk think PRI_CPE and remote end also CPE i have configure /etc/zaptel.conf span=1,1,0,ccs,hdb3 bchan=1-15,17-32 dchan=16 span=1,1,0,ccs,hdb3 bchan=32-46,49-62 dchan=47 in /etc/asterisk/zapata.conf switchtype=qsig context=zap-in signalling=pri_cpe group=1 channel => 1-15,17-31...

...s.conf and since our PRI is fairly simple (just dump all the channels into one group) it works with dialing with dahdi/g1/(number). I'm trying to understand the file though for my own reference. It seems the file looks like this: group=0,11 context=from-pstn switchtype = national signalling = pri_cpe channel => 1-23 context = default group = 63 So what I don't get is why group is specified with 0,11. Is that groups 0 and groups 11? And then it has a random group = 63 at the end. And I dial with group 1 (dahdi/g1), but it seems to work? :) It's completely confused me as to why this a...

...none usecallerid=yes callerid=asreceived threewaycalling=yes transfer=yes signalling=featd ; FXS for ringing phones group=0 flash=350 rxwink=300 prewink=20~~ echocancel=no ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=no immediate=no channel => 1-24 signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master switchtype=national pridialplan=unknown echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=no echotraining=400 ; Asterisk trains to the beginning of the call, number is in milliseconds group=1 context=from-ps...

...plan. "dahdi show channel 1" shows "Fax Handled: no". Does that mean that I don't have it configured correctly? [channels] ; Span 1: WCTE2/0/1 "WCTE23X (PCI) Card 0 Span 1" (MASTER) ESF/B8ZS RED group=10,11 context=from-pstn switchtype = national signalling = pri_cpe faxdetect=incoming faxdetect_timeout=0 faxbuffers => 12,half channel => 1-23 ; Span 2: WCTE2/0/2 "WCTE23X (PCI) Card 0 Span 2" ESF/B8ZS RED group=10,12 context=from-pstn switchtype = national signalling = pri_cpe channel => 25-47 -- Mitch

If you have used * to support a pri as pri_net (as opposed to pri_cpe), either to talk to another * system or a PBX of some sort, I would be very interested in hearing about your experiences. Imparticular, I would like to know that it works before I invest in the extra hardware. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 284-5800 ext 11...

...reewaycalling=yes transfer=yes cancallforward=no callreturn=yes musiconhold=default overlapdial=no relaxdtmf=yes immediate=no ; Echo Setting echocancel=yes echocancelwhenbridged=yes echotraining=yes rxgain=2 txgain=-2 context=fxo_incoming ;### Span: 1 (E1_4) Board 1 switchtype=euroisdn signalling=pri_cpe group=1 channel => 1-15 channel => 17-31 ;### Span: 2 (E1_4) Board 1 switchtype=euroisdn signalling=pri_cpe group=1 channel =32-467 channel =48-62 ;### Span: 3 (E1_4) Board 1 switchtype=euroisdn signalling=pri_cpe group=1 channel =63-77 channel =79-93 ;### Span: 4 (E1_4) Board 1 switchtype=eu...

...=4,0,1,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 zapata.conf [channels] context=default switchtype=euroisdn pridialplan=unknown signalling=pri_cpe usecallerid=yes hidecallerid=no callwaitingcallerid=yes language=en immediate=no channel => 1-15,17-31 channel => 1-15,17-31 channel => 1-15,17-31 channel => 1-15,17-31 --------------------------------- Do you Yahoo!? Yahoo! Mail - 50x more storage than ot...