search for: dialtempl

Anyone have the 7970 xml config for sip yet? Aaron

...onal number i keep getting a busy signal but i dont see anything on the asterisk console (-vvvvvvvvvc) like i do when i dial local or long distance numbers. It makes me think the phone is doing this and not sending the request. I tryed blanking out the dialplan.xml with the below config. <DIALTEMPLATE> <TEMPLATE MATCH="*" Timeout="15"/> <!-- Anything else --> </DIALTEMPLATE> and i even tryed the default config of <DIALTEMPLATE> <TEMPLATE MATCH="0" Timeout="1" User=&q...

> On a related note, how do you get a Cisco 7940 to dial numbers with a > hash in them, instead of just using the hash as a dial key. For > example, I have *#21# to check diverts, but the phone will just dial > "*" as soon as you type the # after it. <DIALTEMPLATE> <TEMPLATE MATCH="#..." Timeout="5" User="Phone" /> <TEMPLATE MATCH="*" Timeout="5" User="Phone" /> </DIALTEMPLATE> randy

Hello list, does anyone know how to change the "interdigit timeout" when using Cisco IP Phone 7940/7960 with SIP-Firmware and Asterisk? it's default value is 15 sec. but i have nothing found to set this in tftp-config file etc. Thanks in advance, Roland

Hi- I have a 7960 using chan_sccp which gives me a busy signal as soon as I dial the 1 in my string of 915552223333. Can't figure out why. I do have a dialplan.xml file: <DIALTEMPLATE> <TEMPLATE MATCH="*" Timeout="5"/> <TEMPLATE MATCH="#..." Timeout="5"/> </DIALTEMPLATE> Anyone have any insights? Thanks Wesley A. Schochet Senior Telecommunications Engineer Select Comfort Corporation *...

In article <Pine.LNX.4.64.0603211635320.7043@ab1-1-246.shsu.edu>, amdtech@shsu.edu says... > You have to set up a dialplan.xml file in your tftpboot directory for the > phone to pull: > > <DIALTEMPLATE> > <TEMPLATE MATCH="9,59....." Timeout="0"/> > <TEMPLATE MATCH="9,29....." Timeout="0"/> > <TEMPLATE MATCH="9,832......." Timeout="0"/> > <TEMPLATE MATCH="9,713......." T...

- How to restart the phone? (On 7960 it is *+6+Settings) - How to setup working dtmf? - How to setup hinting? For line is <line button="4"> <featureID>9</featureID> ... For speeddial is <line button="5"> <featureID>2</featureID> <featureLabel>341</featureLabel> <speedDialNumber>341</speedDialNumber> </line>

I run a SIP-only shop with a 23 channel PRI and single T100P. Here are my configs: /etc/zaptel.conf: span=1,0,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us /etc/asterisk/zapata.conf [channels] context=default switchtype=dms100 signalling=pri_cpe pridialplan=unknown rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=no hidecallerid=no callwaiting=no

Hi! I did manage to load phone with SIP image : SIP70.8-0-3S, made SEP-MAC.cnf.xml, but phone never read the configuration from it. On the screen it's written "Unprovisioned", and phone is not trying to register with asterisk. Please help!! MihaelaMJ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Is there a way to make the Cisco 7960 SIP phone dial out automatically without having to press the dial button, once the numbers that you have entered match a specific pattern? This feature is present when the phone is working with a Cisco CallManager. For example, if all of my internal extensions begin with a '5' and are four digits long, if I dialed '5123' on the phone, the

I've dug through the documentation, and I must have just glanced over this, but how do I set this system up so it executes the call when 4 digits have been entered. Currently it seems to be operating on a timeout system. Cisco 7940's Right now if I press the digits 6000 the phone waits like 8 seconds before going forward. (If I press dial it is immediate). Anybody? -C

...sing>true</natReceivedProcessing> <natEnabled>true</natEnabled> <natAddress></natAddress> <voipControlPort>5060</voipControlPort> <dscpForAudio>184</dscpForAudio> <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy> <dialTemplate>dialplan.xml</dialTemplate> <softKeyFile>SK50719900-3bee-4594-bc3f-6400e1a33bf0.xml</softKeyFile> </sipProfile> <commonProfile> <phonePassword></phonePassword> <backgroundImageAccess>true</backgroundImageAccess> <callLogBlfEnabled>2...

Hi, ? We are new to IP phone firmware upgradation (Sorry if it is a re-post of previous question(s)). ? Recently we have bought a cisco 7942G IP phone. It currently has SIP 42.9-0-2SR1S firmware loaded on it. We do not see any option to configure a SIP Proxy where we can provide SIP Server (Asterisk PC/Device)? IP address (with current firmware on it) to register it with Asterisk. ? Do we need to

...mber> </forwardCallInfoDisplay> </line> </sipLines> <voipControlPort>5060</voipControlPort> <dscpForAudio>184</dscpForAudio> <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy> <dialTemplate>dialplan.xml</dialTemplate> </sipProfile> <commonProfile> <phonePassword></phonePassword> <backgroundImageAccess>true</backgroundImageAccess> <callLogBlfEnabled>1</callLogBlfEnabled> </commonProfile> &lt...

Hi Everyone, I am having some issues getting my 7961 working with Trixbox. I have loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes into an unprovisioned state. A status message shows up and says ?Error Verifying Config Info?. I have read quite a bit on this topic (getting 7961?s to work with Asterisk and TB) and only came across a few postings where other people

> > No, this is not the case currently with any of the Cisco SIP software > loads that I am aware of. If you find this to be incorrect, please > let the list know. Cisco has not deployed much of the featureset in > their SCCP phones (such as paging/intercom) into the SIP phones due > to lack of standards/interest/political capital. > > JT Ok, after further

Hi everyone, I've been toying with * for quite some time now. I've got two Cisco 7940's with the SIP firmware playing nice with *. I can also make outbound calls via IAXTel (toll-free calls only) and all other calls I have routed out my X100P-clone adapter. Here's my question... Is there a way to capture the inbound callerid from my phone line (coming in on the X100P) and have

Anyone know if it is possible to load your own XML scripts on to the phone, bypassing the Cisco CallManager? I am still waiting for my phone to arrive, but I have been playing with Cisco's phone services emulator, and that doesn't seem to like anything I pass to it. If it is possible, anyone want to share any sample scripts they have. --Mike