Hi,
I am using opensuse as my dome and I tried to make a NIC card work in PCI
passthrough. pciback is installed as a module in this kernel. I unbound all
the NIC''s from dom0 driver and bound them to PCI back.
I then modified the domU config file to include the pci device. When the
system started booting up, I NICs were recognized however they failed to
attach. This is the message I got,
em1: <Intel(R) PRO/1000 Network Connection 7.0.0> port 0xc140-0xc15f mem
0xf3020 000-0xf303ffff,0xf3040000-0xf305ffff irq 37 at
device 5.0 on pci0
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xf3020000
em1: Setup MSIX failure
ioapic0: routing intpin 37 (PCI IRQ 37) to vector 52
em1: [FILTER]
em1: bpf attached
em1: Ethernet address: 00:15:17:ae:a1:f1
I am not sure how to recover from this problem. Any suggestion to debug
this would be very helpful.
Thanks
_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users
