similar to: Trouble enabling PCI passthrough in xen HVM

Hi, We're having some trouble with detection of a couple of Sil3124 SATA controller cards on newer motherboard and processor combos. Specifically, we're running a Supermicro X9SCM-F motherboard (latest BIOS) and Intel E3-1220v2 CPU. What we're seeing: - Syba Sil3124 PCIe cards are only being detected when installed in PCIe Slot 4 -- The motherboard documentation shows that this

Good morning, I'm having a bit of an issue getting a 3CR990B-TXM NIC detected and usable. Just wondering if anyone knows of any issues with this NIC chipset and/or with the motherboard chipset. The motherboard is a Biostar GeForce 6100 AM2 using an nVidia nForce 410 chipset and nVidia GeForce 6100 vide chipset. I've tried FreeBSD 6.1, 6.2, 6-STABLE (from Wed), and 7-CURRENT (from

Hi all, Trying to upgrade a system from 9.0-RELEASE to 9.1-PRE from yesterday on my machine (GEOM+ZFS mirror setup on ada[01]p3), the new kernel becomes unable to mount root... The only way to recover is to boot from 9.0 kernel. The disks were already named ada[01] in 9.0, so I suspect nothing there... I tried - disabling AHCI in bios (no change seen) - change cables, check PSU, test disks

Hi, there's a regression going from 6.2 to 6.3, where it will panic upon booting the kernel within vm_fault. This problem has been discussed before, but I'm seeing it reliably on a RELENG_6 checkout from 5th of May. It affects multiple (but identical) systems, here's an verbose boot leading to the panic. Please note that 6.2 was running fine on these machines, they also boot

Well this is new. I haven't a clue what Dell has done on this R620, but this popped up today after I did a boat load of BIOS updates and tried to install stable/9 from our yahoo tree. If anyone sees the obvious solution here, I'd love to figure it out. found-> vendor=0x14e4, dev=0x165f, revid=0x00 domain=0, bus=2, slot=0, func=1 class=02-00-00, hdrtype=0x00, mfdev=1

Hello List, I have to dualcore Athlon 64 4800+ systems. Initially I was running 4.9 on both of them an was able to get 54mbits thru direct connected realtek 10/100 cards as measured by nttcp. I put stable on one of the system and now can on get 37mbits as measured by nttcp when going thru an ipsec tunnel. Eliminating the tunnel I get 94mbit/sec. Ideas as to why this is happening? Also

Hi. I've recently borrowed a SuperMicro 6013P-8 from a vendor for the purposes of testing it to see if FreeBSD and these machines will make a good replacements for our current flock of 11 Netra T1s running solaris. Things are going very well with the tests, with the glaring exception of the following crash: While doing some significant disk operations: du, deleting a different part of the

hi folks: xorg caused my macbook 10,1 reboot immediately while startup X with latested nvidia-driver and event not to generate Xorg.0.log file attached my verbose message. thanks for any ideas --wsk -------------- next part -------------- Sep 20 15:40:31 rmbp syslogd: kernel boot file is /boot/kernel/kernel Sep 20 15:40:31 rmbp kernel: 2 Sep 20 15:40:31 rmbp kernel: MADT: Interrupt override:

Hello, I have a server pfsense in bridge mode to function as transparent FW, the problem is that once I connect the pfsense between my router core and my core switch catalyst a few seconds begin to appear several messages like these: em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting And the connection falls

Once upon a time, Lists <lists at benjamindsmith.com> said: > I understand that it's possible to allow the 4 VM guest systems to each have a > "direct" fixed IP address and access the addresses \via the host network > adapter, while the host retains its fixed IP. If you are running NetworkManager (the default), it's not too hard. Here's an example

Hi, We did an upgrade of one of our machines from an Aug 25 CVS and ever since then one of the machines likes to reboot about once a day. The machine is the following: IBM x340 2x1GHZ Processors 1GB RAM 3x36GB Drives (RAID 5) Mylex ExtreRAID 352 In the panic it mentions httpd, but I don't *think* it's apache (1.3.27) that's causing the problem, or am I wrong? I also believe it is

Hi, I am running a Xeon with hyperthreading support. Until last week's HTT modifications, according to ps(1) and top(1) both logicals CPUs were in use. (Processes in CPU0 and CPU1 state; "C" column showing "0" or "1".) This has changed with a recent -STABLE kernel which includes last week's changes to HTT (removing "options HTT"). I am only seeing

After some dialog with Terry Lambert on -hackers, I've been advised to post this here. I have a 4.7-RELEASE-p10 box that is suffering regular kernel panics. The machine is a Dell 2650 running primarily as a file/print server to a number of computer labs of about 400 machines (although it also functions as a rembo image server and squid proxy). It mainly stores applications, which

Thomas, Have spoken to Soren, from my bootlog he believes that the problem is in atapicam causing the system to lock up. He is happy to answer some questions but doesnt have time to delve into atapicam himself. Did you author atapicam, I have seen your name on the sourcecode, can you help me further? Whats next? Thanks Adam. -------------- next part -------------- An embedded message was

I am getting these messages every 30 seconds or so. I searched around and found a few other post about this problem with other devices, but no answers to the problem. I didn't notice any of these message until I upgrade to 4.8-RELEASE the other day. This is a dual processor machine. It happens on all my machines that have em devices, which all happen to be dual processor machines. I

Just trying to understand if anything might be going on with this crash dump or just faulty hardware ? dmesg at the end ---Mike # gdb -k /kernel.debug vmcore.0 GNU gdb 4.18 (FreeBSD) Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type

Hello, I have the following hardware configuration. Tyan 2466N motherboard, 1.03 BIOS, 2 Athlon-MP 1800+ CPUs, 512MB registered ECC DRAM, Onboard 3Com NIC (xl type) Radeon 8500 AGP video card Adaptec 3210S SCSI RAID controller Comtrol RocketPort 8 port PCI serial card I have started to experience some odd system lockups in the past couple months, and it seems to be getting worse. I particular,

Hello metafor users, I'm using metafor to perform a single-effect summary estimate of the raw proportion of patients experiencing a post-operative complication, and I'm interested in seeing if this proportion differs between the three most commonly used surgical techniques. The software is working as expected, but I would like to double check on the interpretation of my mixed-effect model

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

I'm observing double the amount of "recv" bytes in latest Centos v6.8 with ixgbe 4.2.1-k. Anybody seeing the same? $ ethtool -i em1 driver: ixgbe version: 4.2.1-k $ uname -an Linux chndcdmid01.rd.ph.cox.net 2.6.32-642.4.2.el6.x86_64 #1 SMP Tue Aug 23 19:58:13 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux Doing comparison on 2 days at same hour just to show the difference. This is an