>
> i have a system with
>
> /dev/sda - System Hard Drive
>
> /dev/md0 - SoftwareRaid 5 for Data
> with
> /dev/sdb
> /dev/sdc
> /dev/sdd
>
>
> Now i have one more in a removeable frame for Backup
> /dev/sde
>
> /dev/md0 is forwarded to an Samba-Domain for Data service in the
network.> What''s the best way to sync the data from /dev/md0 to /dev/sde ?
>
> is a domain hotplug able ? So when i plug in /dev/sde, it''s
automatic
> forwards to Samba domain, is this possible ?
>
''xm block-attach'' and ''xm block-detach'' are
the commands to plug and
unplug devices from a DomU. You should be able to do this automatically
via udev - make a rule that identifies your device by serial number or
path (/dev/disk/by-id/... or /dev/disk/by-path/...) and make a RUN +command that
does the ''xm block-attach'', and the opposite on unplug. Not
sure if you''re asking for trouble with the unplug though - domu might
get upset when the underlying device goes missing before it is unplugged
from the domain.
As I hinted above, it really is best to use /dev/disk/by-id/ or
/dev/disk/by-path/ to be absolutely sure that you have the right device.
If you attach an eSATA device one day and it bumps all your devices up
by one (eg /dev/sdd becomes /dev/sde) then you''ll suddenly have one of
your RAID devices attached to your DomU instead, and nothing good will
come of that.
/dev/disk/by-id/... is useful when you want a specific physical disk as
you can refer to it via make, model, and serial number.
/dev/disk/by-path/... is useful when you want to refer to a disk plugged
into a specific USB port (unless your USB adapters are enumerated in
random order... then you''re screwed!). I do this will USB backup disks.
James
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users