xamiw@arcor.de wrote:> Hi all.
>
> I have still network issues. I''m now able to connect two virtual
domains with a bridge defined in domain0. But this is not what I want. I
don''t want to affect domain0 in any way what means no network
connections between the domain0 and the virtual domains.
>
> I just want to define a ''cross-over cable'' connecting
eth0 of the first domU with the eth0 of the second domU.
>
>
Can you not simply have Xen not set up any bridging by:
1. putting an ''exit 0'' at the top of /etc/xen/scripts/network
2. Set up the bridge you want in your dom0 network start scripts (in
Debian I use:
/etc/network/interfaces:
iface xen-br0 inet static
address 192.168.10.2
netmask 255.255.255.0
network 192.168.10.0
broadcast 192.168.10.255
pre-up /usr/sbin/brctl addbr xen-br0
3. In your /etc/xen/host config files, set them to use this existing bridge
This will have all domUs attached to the xen-br0 bridge, but the dom0
host will not be connected.
This works for me with xen 2.0.7
Hope this helps.
-Barry Flanagan
--
-Barry Flanagan
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users