similar to: still network issues

Hello, I have the need to connect 2 remote site with vpn, the windows pc of the 2 site it can share the HD and printer. This is my configuration : LOCAL NETWORK A : ip from 192.168.10.2 to 192.168.10.99 | | | | eth0: 192.168.10.1 FIREWALL A : ( with debian ; openvpn ver. 2.0.beta15 ; shorewall ver 2.0.11 ) eth1 : xxx.xxx.xxx.xxx ( pubblic ip address ) | | | | INTERNET | | | eth1 :

Hi everyone! I have the following setup: domain0 |-domU1 |-domU2 |-domU3 I am running this with libvirt on a XEN server. Right now the server is connected to our office network, but later it will be in a hosted environment. I need domU1 and domU3 to have a public IP, and all of the domUs and the dom0 should have an internal IP address to communicate with each other. So this is what I would like

Santiago, I appreciate your offer. I'm not really a kernel hacker, however I do know C and I would be willing to try if you point me in the right direction. Here is my first attempt using Debian running on an UltraSPARC: debian{root}:/root<512>strace -f -F -v brctl addbr br0 execve("/usr/sbin/brctl", ["brctl", "addbr", "br0"], [/* 16 vars */]) =

Hi wondering if anyone can help. I have two NICs on a debian sarge based system and current running as a bridge (br0) which consists of eth0 and eth1. Is it possible to add a virtual interface to the eth1 so I can also do NAT on the box as well? I have tried many times and keep coming up with errors. Kind Regards William Bohannan

Hello, I can''t seem to get the network going. I found this message in the log of Domain0: ----------------------------------------------------------------------- Dec 1 15:39:18 zms wait_for_sysfs[4180]: either wait_for_sysfs (udev 039) needs an update to handle the device ''/class/net/br0'' properly (no device symlink) or the sysfs-support of your device''s

re can somebody tell me what am I doing wrong (at this late night hour), because vlan are not getting bridged at all. ifconfig eth0 0.0.0.0 up ifconfig eth1 0.0.0.0 up brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth1 ifconfig br0 up vconfig add br0 X vconfig add br0 Y X = vlan-ID (example: 222) Y = vlan ID (example: 223) # brctl show bridge name bridge

Hello, I how an embedded processor that needs to act as a bridge between a wireless and wired network. I have managed to bring up the bridge fine. I can also bring up the bridge with a static ip address. However I can not figure out how to bring up the bridge with a dynamic ip address. Is it possible to for a bridge to get a dynamically assigned ip address? Oliver

Hi all, I'm facing a problem when a user (q and g in this example) is logging into dovecot. Can anybody tell some hint? Thanks in advance. George /var/log/mail.log: ... Jan 8 16:18:28 test dovecot: User q is missing UID (see mail_uid setting) Jan 8 16:18:28 test dovecot: imap-login: Internal login failure (auth failed, 1 attempts): user=<q>, method=PLAIN, rip=AAA.BBB.CCC.DDD,

Hi, I had successfully setup my bridge (br0) but after few minutes the br0 interface seems not working. ifconfig eth0 0.0.0.0 ifconfig eth5 0.0.0.0 brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth5 brctl stp br0 on I check on my system's /var/log/syslog file. It shows something strange messages as below: - Jan 2 10:44:22 fw01 kernel: ipt_tcpmss_target: bad length (64 bytes)

I'm sorry to bother you but I'm stuck I can not make a bridge work for me. My current configuration is: eth0 Link encap:Ethernet Hardware Adresse 00:1d:7d:d1:06:bd inet Adresse:192.168.1.1 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::21d:7dff:fed1:6bd/64 G?ltigkeitsbereich:V according to all what I could find in the net. The following should

Hi I have been using Shorewall for a while now and find it very useful and easy to configure, I am learning iptables and having trouble getting the bridge to successfully work with squid, although I get it working with Shorewall straight away? Does anyone know the rules to successfully use squid with a transparent bridge? Internet – router - (bridge eth0 – eth1) – local lan auto lo iface lo

Hello, I thinking about using PCI passthrough to dedicated a domU as firewall. I understand PCI passthrough concept. When done, my domU will see network card and the dom0 won''t any more. So I''ll be able to filter all trafic from outside, since it will go through network domU. Then, how will I be able to connect other domU (and maybe dom0) to the network domU ? In a normal way,

Hi All, I''m trying to do some traffic shaping on an ethernet bridge. Currently, I have the following setup working: ifconfig eth0 down brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth1 brctl stp br0 off ifconfig eth0 0.0.0.0 up ifconfig eth1 0.0.0.0 up ifconfig br0 up This creates a bridge consisting of eth0 and eth1. So far so good. I now want to use tc to shape traffic

[This email is either empty or too large to be displayed at this time]

Hi! I have an bridge that keeps crashing (random times .. days with 5-6 crashes with normal functioning of 1-2 weeks) my machine that is used also as gateway (nat). the problem is that i don't have an log of the kenel panic so i don have what to post ... The configuration of bridge is like this: (each eth0 and eth1 are in different vlans in switch) $IFCONFIG eth0 0.0.0.0 $IFCONFIG eth1

I've got a 2.6.8 kernel with bridging enabled as a module, two nics (LNE100TX and RTL8139) and i've run the following commands with no errors modprobe -v bridge brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth1 both interfaces have 0.0.0.0 as their addresses and brctl showmacs br0 shows the macs for both internal cards. However, bridging doesn't seem to be working at all.

Hi, I added below code in /etc/rc.d/rc.local in order to load the bridge brctl addbr br0 brctl addif br0 eth0 brctl addif br0 wlan0 ifconfig br0 up but it fail, i found error in /var/log/message said localhost: modprobe: modprobe cannot locate br0 modules but i found it said suceedly up the br0 interface anyone know? ===== Ô¸ÄúÓÀÔ¶ÐÒ¸££¬¿ìÀֺͰ²Ïê Happy & Healthy Always ! ^_^ !

Hi there, I'm currently experiencing a minor problem using the bridge module under kernel 2.4.27 part of the Devil Linux distribution (http://www.devil-linux.org). The problem I am having is that when the bridge is unloaded during a reboot I receive the following errors in /var/log/messages: Nov 14 13:22:13 src@Devil kernel: unregister_netdevice: waiting for br0 to become free. Usage count =

With recent 2.6 kernels, the command brctl delbr br0 hangs during shutdown, and the kernel prints this message again and again: unregister_netdevice: waiting for br0 to become free. Usage count = 1 I was able to reproduce this problem with several kernels between (and including) 2.6.9-rc1 and 2.6.11-rc2-bk9. I haven't tried later versions than 2.6.11-rc2-bk9 yet. 2.6.8.1-bk2 still works

Hey folks! I want to add a CentOS 5.2 domU to an existing server (Fedora 8) which was setup by another company. The Dom0 does not provide any other services but a BIND-DHCP-server (they deleted dnsmasq and installed bind). Don''t ask my why they did that. My new DomU is connected to eth0, which is a bridge. BIND also listens on eth0 to serve other machines. I start the install of centos