wine users - Oct 2008 - Wine, PLC Programmer and COM port Problems

Hello,
I'm attempting to use wine with PLC Programmer, which trying to connect to
PLC by COM port.
After installation and run, program not detecting com ports.

This is HP OmniBook 900 Laptop.
PIII 500
Sidux (without desktop environment, just pure xserver) - I'm using this
laptop only for this program. I have configured it on XFCE, then deleted it.
Program starting after system Boot, and when someone close it, computer will
shutdown.
Kernel 2.6.27

Please help me, because I don't want, to buy Windows just for this program. 
Best regards.

The answer is simple by default wine is not connected to any.

cd ~/.wine/dosdevices then ln -s </dev/serial port you want to use> com1

And so on for all the com devices you want access able form inside wine.  Yes
this still needs adding to winecfg.

Before you get too far using the PLC I would recommend checking out the Native
Linux options.  http://plc.sourceforge.net/

People forget a lot of embedded development is done on Linux systems.  There is
more plc software for linux than what is just listed on that one site.