similar to: Asterisk 1.4 remote pickup

Hi, according to the description of Pickup() on page http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup I can use this command to pickup a call at a certain extensions. When I try this with e.g. exten => *8200,1,Pickup(200) Asterisk tells me that the highest value for the Pickup command is 63. Wenn I enter the number of a callgroup instead of an extension, I can pickup the call.

I'm using a Snom 320 in a CAP position and the receptionist wants to do blind transfers. OK, no problem so far. Now she has asked me how to UN-transfer a call, as in, she transfers a call and wants to hook the call back before it connects (she wanted to tell the caller additional information for example) I don't think that this is possible as once my dialplan starts using Dial()

Hi list, i'm trying to do that iax channels can acces the pickup feature(normaly *8 dialing). But always the iax channel when dial *8, search for the extensi?n *8 on its context. I know i can program the *8 extension with the pickup applicati?n. But its doesn't works for me, becouse i need to pickup some calls comming from IVR's o Queues. And there de exten is no the same as the

Hi all, I have a GXP2000 with BLF configured. I follow the configuration guide to enable the pickup cmd as follow and include it under corresponding content. [BLF_group_pickup] exten => _**1XX,1,Pickup(${EXTEN:2}) exten => _**1XX,n,Hangup The I press the single key to pickup the call to extension 100 when there is a call to it. From CLI, I can see it issue **100 to asterisk but failed

I'm having trouble with call pickups. Suppose ring group is 100 and has extensions 101 and 102. Someone calls 100, 101 rings and 102 wants to pick the call up. If 102 dials **100, call pickup works. If 102 dials **101, call pickup fails. In my dialplan I have: exten => **101,1,NoOp(pickup extension) exten => **101,n,Pickup(101) exten => **101,n,NoOp(pickup group) exten =>

Hi, when i use the *8 for the call pickup the call i fetch is directly connected and i can't see the callers number. What i want is that the call in the first rings at my phone and in the second i can see the callers number. I am using a polycom 500 ip phone. Is this a special polycom problem? Regards, Kib

Hey there list ! I'm receiving negative feedback when people try to pickup another ringing phone by pressing *8 on there own Grandstream device. These are my setting that should make pickup possible : all my sip-clients (Grandstream) have this in their config (sip.conf) : callgroup=1 pickupgroup=1 canreinvite=no qualify=yes So they are all in the same pickupgroup... This the

What's the proper syntax for implementing directed call pickup? Running cvs-head from today (9/24/05 including Mark's fixes), and tried: exten => *99,1,Pickup(${EXTEN:3}) but that does not seem to work, and there isn't an example in the configs directory. 'show application pickup' suggests the above should work with our sip phones, but apparently I'm missing

hello, is there some way to notify people in the same pickup group about call from caller to callee? i.e. i have call from 111 to 222 there are 222,333,444 in the same pickup group 333,444 see on the phone (aastra) that 111 calling to 222 and can pickup the call with *8 siemens have this on their sip openstage phones. how they do this? thanks -- --------------------------------------- Marek

In the list I found some messages that *8 doesn't work so well. Is there any possibility to create a extention that you can call, and if you are fast enough, pick up a number? (Also if you are outside your callgroup) like pseudo code: exten => 888, 1, EnterPhoneNumber() exten => 888, 2, EnterPass() exten => 888, 3, TransferCallToThisPhone() exten => 888, 103, Invalid()

Hi list, Does anyone have any advice on the following: Incoming calls to our office come in on a SIP trunk. Since all our offices/desks are in close proximity, we would like just a single phone to ring when a call comes in instead of ringing every person's phone. Currently we've got this working by having all the phones in a callgroup/pickupgroup and incoming calls ring the

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

I'm trying to set the Pickup feature. I'm setting my extensions.conf as: exten => _*.,1,Pickup(SIP/${EXTEN:1}) but if, for example, extension 03 is ringing by a call made from extension 01, and I try to pick it up from extension 02 (by dialing *03 from extension 02), I can see in the Asterisk console (Verbosity set to 10): -- Executing Dial("SIP/01-512c",

Hi All, I'm using Asterisk 1.2.14 under openSuSE 10.2 with kernel 2.6.18. I have Wildcard TDM400P card and D-Link DPH-120S and DPH-140S SIP phones. I would like to be able to pickup ringing extention from any SIP phone using Pickup() application. from my dial plan: [incoming] exten => s,1,Dial(SIP/somebody1|60|tTrR) [internal] include => outbound-local include => parkedcalls

Hi! > How to do this ?? > To proceed with your answer on PICKUPMARK, where do I put this ??? Look at the example for Asterisk 1.4 on this page: http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup Philipp

I cannot use CVS, is there anoyher way to use direct pickup ? Thanks again Giordano ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Alexander Lopez Inviato: venerd? 16 settembre 2005 17.53 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: RE: [Asterisk-Users] direct sip call

I am having a bit of a problem implementing the pickup command in my dial plan. I have setup this rule: exten => _*8XXX,1,Pickup(${EXTEN:2}) This works as expected when someone dials an extensions number and I can get the call. The problem I have is that when a call enters my welcome menu and does not press anything there is a timeout that sends them to the recepcionist. The rule is:

Hello all, I have an asterisk @ home system running 1.2.4. Call pickup seems to be a bit of a problem. I've looked at a lot of posts and the wiki, which states that you need to define the pickup extension in features.conf and the pickup groups in sip.conf. I've done this, however there is no definition for *8 in extensions.conf. Is there supposed to be and it has been removed?

When I execute a pickup on a ringing phone I get CALL FAILED REASON CODE 603. I am dialing **212 with the following config. Anyone have a suggestion? EXTENSIONS.CONF -snip- [BLF_Group_Pickup] ; Defines how the extension to pick up a ringing phone in your BLF group exten => _**XXX,1,Pickup(${EXTEN:2}) exten => _**XXX,n,Hangup() [BLF] ; Defines a BLF Hint for phones exten =>

Hello. I have this issue, when I pickup a call that is ringing in a SIP Phone, it keeps ringing. There is bug #116 that mention something about these, but it does not seem to be resolved , at least, not yet. Anybody else has seen it behavior ? Thank's.