similar to: Newbie Polycom: DND answered as "on the phone" instead of "not available"

Hi, I know having Asterisk aware of Polycom "Do No Disturb" state wasn't working before (1.4), but is this working in any recent version? Is there any "custom" way of doing this? Regards, Mike -------------- next part -------------- An HTML attachment was scrubbed... URL:

I thought it was quite easy to implement but I cannot get one-touch recording to work. Here are the changes what I did: I restarted Asterisk after the change (because reload does not work for changes in features.conf). I press *1 on the Polycom IP600 phone to record a conversation but no new wav file appear in /var/spool/asterisk/monitor or elsewhere. Any suggestions? Here is the console log:

I have been testing with Polycom IP600 phones for a month or so. I found out that there are frequent problems with the handset. The problem is I can hear the other end but the other end cannot hear me. I have already downloaded the latest bootROM 3.1.3 and sip 2.1.2 However, there are no problems with the headset or speaker phone. Has anyone encountered such problems before? Thanks.

Well, yes and no. I tested that before and it causes a silent ring instead of a call rejection. I actually want to disable the entire feature. So the phone always rings unless you're actually on the phone. Thanks for the reply though! Regards, Jan ________________________________ Fr?n: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] F?r Jerry

Only slightly asterisk related I suppose, but hoping someone has attempted this... I have an old installation with a bunch of IP501s, and one died. I replaced it with an IP450, and the user sorely misses his DND button. I hated those DND buttons anyway, as I couldn't control them centrally. I'd *like* to program one of his softkeys to send a *XX sequence to do DND on the

Hi We have polycom 430,501 and 301 phones. Our customer does not need DND feature in any form. I can disable this feature from asterisk server but How can i disable this feature on phones. In the sip configuration file i found the parameter that change the phone behaviour during DND from busy to normal but still if the phone is in dnd mode the phone ringer would be off which is unacceptable.

I am working on Polycom IP601 console with expansion module. I want to put on the BLF (busy lamp field) feature on all the contact/speed dial names I put on the console but I could not get it to work. *CLI> core show version Asterisk 1.4.13 built by root @ hostname on a i686 running Linux on 2007-11-20 05:26:15 UTC *CLI> sip show subscriptions Peer User Call ID

Greetings- As many of your are Polycom "experienced", I was hoping some kind soul could provide direction on a specific issue. On a system running Asterisk 11.11.0 (and latest FreePBX), I'm finding an instance where, using intercom/paging functionality of FreePBX, I need to override an end user's 'Do Not Disturb' selection on the handset. By default, DND simply

When I downloaded the sip and bootrom from Polycom website, I noticed a file called SoundPointIPWelcome.wav. However, I have no idea where and when it was used. I played the wav file but I have never heard the phone using this wav file before. Does anyone know what it is used for?

Have a strange problem... When a C7960 calls the Polycom ip600, the ip600's first line button blinks, the ip600 display shows the proper callerid, but the phone does not ring at all. If I call the same ip600 from a bt102, the ip600 rings properly. If I call the same ip600 from another C7960, the ip600 rings properly. All phones and asterisk are on the same lan within a few feet. The

Hi, I'm looking to disable rejecting calls from my call center employees. They are using Polycom phones. Is there a way to either disable the reject/DND features on the Polycom phones (don`t think so) or have the Asterisk PBX ignore "Got SIP response 486 "Busy Here" back from 12.23.34.45" response from specific phones/SIP registrations and just keep on ringing?

Hi all, I've just updated to current CVS, and have 2 polycom IP phones, one is a IP600 and the other is a IP300. The IP600 shows the status of the IP300 and a ZAP line quite nicely, but the IP300 won't show the status of the IP600.... Is there any additional debug apart from "show hints" to see why this might not be working ?? -= Registered Asterisk Dial Plan Hints =-

I'm having a problem with the callerID that the polycom IP600 phones are displaying. I would like to modify the CIDName and leave CIDNumber as exactly what the phone call came in as(provided they aren't hiding callerID). Most of the calls will be going to the queue, but a few will go directly to the SIP phones. I've done a various combinations of using SetCallerID(),

Hi I am struggling with hardware choices to get started with. My options are narrowed down to SIP phones - Polycom IP500, IP600 and Cisco 7940G. of importance is: - functionality / integration with asterisk - headset functionality and use - voice quality - build quality Is there much of a difference between Polycom and Cisco? Scanning the group it looks like there may be slightly more

I am getting ready to install Asterisk and I was looking into the Polycom IP600 phones. I spoke with Polycom sales to verify the multiple line appearance and they said it would work. More specifically, if lines 1-3 all contain the same SIP registration info, the Polycom will only send out 1 SIP registration to the server and then handle the calls ringing on multiple lines. I was wondering if

Hi, I'm testing a Polycom IP600. With firmware version 1.1 the phone reboots at any time. With firmware version 1.2, the first reboot was an endless reboot. Then I moved the phone to another lan port, then it worked fine. Then I installed again in the initial lan port and the phone works well. However after some time of inactivity (1 hour?), the IP600 stops to send and receive calls.

I did not really spend too much time on looking at call forwarding and wonder if someone could help me. It seems that for setting call forwarding on the Polycom phone itself, only "forward all calls" will work. The other call forward function like "forward if no-answer for n rings" or "forward if busy" does not work at all on the phone. If that is the case, it

I have a Polycom IP600 serving as a receptionist phone. We developed a call manager via c/gtk that runs on a touchpad. It allows them to transfer calls, transfer to voicemail, page, etc. The problem is this: When paging another phone from the touchpad, I have to open a channel to the receptionist phone. This rings the receptionist phone. When she picks up, it then pages the desired person. This is

Hi, I am mostly happy with my Polycom IP600 but it apparently needs to check the FTP server every minute. I couldn't find any obvious setting related to that behavior in the configuration files. Any idea how to curb the IP600's spurious network activity? Thanks, -- Lord, protect me from your followers.

Hi, I've noticed that when I set a phone on DND (phone-side DND, meaning it rejects calls with a busy status, SIP 486 response code I believe) the queue keeps on trying the phone over and over again. This creates issues in terms of CDR entries - in a scenario where there is only one phone on DND, and a delay between attempts of 1 second, the queue will attempt to ring the single phone