Kaushal Shriyan
2011-Apr-13 14:13 UTC
[CentOS] Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box
Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 10) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 01) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS480 [Radeon Xpress 200G Series] 01:05.1 Display controller: ATI Technologies Inc Radeon Xpress Series (RS480) 02:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa) 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 20) 05:0a.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adapter (rev 11) [root at asterisk ~]# cat /etc/redhat-release CentOS release 5.5 (Final) [root at asterisk ~]# asterisk -v Asterisk 1.6.2.11, Copyright (C) 1999 - 2010 Digium, Inc. and others. Created by Mark Spencer <markster at digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. =======================================================================Asterisk already running on /var/run/asterisk/asterisk.ctl. Use 'asterisk -r' to connect. [root at asterisk ~]# Please suggest/guide Thanks Kaushal -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20110413/310b25c5/attachment-0005.html>
Joseph L. Casale
2011-Apr-13 15:42 UTC
[CentOS] Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box
>I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) >Card installed on the box. Its not detected. Details are as below :-I have seen these type of cards detected as something else. Its also been ages since I used asterisk anyway, I use FreeSWITCH now and as you have a Sangoma you should too:) You will need Sangoma's drivers, their wiki is as straightforward as it gets. Head over there... Also, they offer free support for their products if the wiki doesn't help you. Good luck, jlc
Ryan Wagoner
2011-Apr-13 15:42 UTC
[CentOS] Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box
On Wed, Apr 13, 2011 at 10:13 AM, Kaushal Shriyan <kaushalshriyan at gmail.com> wrote:> Hi, > > I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI > Express ) Card installed on the box. Its not detected. Details are as below > :-Sounds like a hardware problem. I'm running CentOS 5.5 with three Sangoma cards and Asterisk. The one is showing up as a A200 card instead of a A102d card but it is working fine. [root at voip ~]# cat /etc/redhat-release CentOS release 5.5 (Final) [root at voip ~]# uname -r 2.6.18-194.32.1.el5 [root at voip ~]# lspci | grep Sangoma 05:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card 08:04.0 Network controller: Sangoma Technologies Corp. A104d QUAD T1/E1 AFT card 0a:04.0 Network controller: Sangoma Technologies Corp. A104d QUAD T1/E1 AFT card Ryan
Possibly Parallel Threads
- Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card
- A101DE Sangoma Card in AsteriskNow 1.7.1
- CentOS6: sound prefs, how to limit output volume to the un-amplified range?
- Sangoma A104d and Adtran 850 problems
- Configuring Sangoma A101D with Asterisk 1.2.18 & zaptel-1.2.17.1