similar to: Adit 600 MGCP configuration

Got at suggestion from CarrierAccess to use the Adit 600 as an VoIP router using MGCP IP protocol, instead of controlling it through an E1. Have anyone tried this configuration? How does MGCP works? I've tried to search for it on Google, but I only find the protocol specification for it. Is Asterisk fully capable of this? I can't find any documentatin covering the use of MGCP in Asterisk.

Hi, Anybody out there running Adit600s? I have in my care an Adit600 channel bank connected to an old (version 1.0.6) Asterisk instance with MGCP. When trying a more recent Asterisk (1.4.21.2~dfsg-3+lenny1, Stock current Debian) calls fail. I have attempted to add the "slowsequence = yes" line to mgcp.conf. (It seemed to be the only likely candidate in the example files I found

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Does anyone know what I need to put in the mgcp.conf to connect to an adit 600? Also if you know what I need to configure on the Adit600 itself, that would help too. - --Tod -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

I've been reading the Google searches trying to understand how to tie together Adit 600 to Asterisk to provide 2 way service. I'm about blind from reading. I assume, the answer is using MGCP between the boxes. However, the examples I found don't really explain fully enough to know how to modify examples to work for me. I'll have in the ADIT with T1's. There is a CMG and

What server hardware would you recommend for an Asterisk system which are really critical? The additional hardware will probably be two digium TE110P cards, and an Adit 600 platform. If it's possible to run on -48VDC, It would be great! Are there any experiences with any HP or FujitsuSiemens systems? Or other "complete server" systems? Thanks! BR Daniel Nystr?m

Has anyone had any success using the Adit 600 with the CMG card talking MGCP to asterisk? I want to have a central asterisk server with 10 Adit 600's at various locations providing 24 FXS ports.... Thanks, Isaac

I had MCGP working to a ADIT 600 fine with debain sarge stable / asterisk stable - wanted to try red hat and got the below message - then I re-installed debian and am still getting the same message below - any comments are greatly appreciated - I did play with the config files with no prevail - the Adit seems to be doing its job per tech support at CAC. I listed my conigs below I go off hook

I've searched but can't find an answer as to how many MGCP paths can a single ADIT/CMG card support? It appears it's only 24 ports, maybe 48. What I'd like to do is install 6 Telco T1's into a single (or more) Adit 600 and route inbound calls towards asterisk. Can I have more than one CMG in a single chassis? Or maybe you know of a better way to connect T1's to

Hi All, I'm trying to hook up asterisk (CVS-HEAD-02/09/05-13:44:11 ) to a ADIT 600 via MGCP. Got it working really nice but now have a pretty bad problem: 1. When I perform a flash on the telephone, I usually get a second dialtone, but when I dial, dialtone doesn't break. If I flash back and forth a few times, it will eventually give me no dialtone.. here if I dial, it successfully

I have this idea to use an old ADIT 600 with a CMG card to convert two T1 TDM circuits to MGCP towards asterisk. The basics I've found on the net, but there is not much available. I've cut and pasted the mgcp.conf details I could find, but there not much as far as CMG setup. I was hoping I could hook-up with someone that's tried this so I could pick your brain about the finer

Folks, I'm experimenting with bringing multiple (8) analog lines from our local telco into a Carrier Access ADIT 600 channel bank with an FXO module, then having this talk to Asterisk via the T1 TDM controller on the ADIT and a TE405P card. I don't know if this will work well (ie: give me decent echo cancellation, call disconnect supervision, caller ID etc) but I haven't had much

I'm emailing this as the customer in this case, since my carrier appears to be completely unable to solve this. A brief rundown of the problem: - We have several voice lines going through the ADIT, of course into a VoIP type of arrangement. - Voice traffic will become choppy, even drop calls completely, at random but quite often. Modem calls (which we needed unfortunately) are a joke. -

Has anyone ever gotten an Adit 600 to work with Asterisk1.4 via MGCP. Asterisk keeps giving me the following error in the LOGs: [Jun 30 08:32:59] NOTICE[26785]: chan_mgcp.c:1726 find_subchannel_and_lock: Gateway 10.0.0.245' (and thus its endpoint '*') does not exist MGCP Config: [AFSWestAdit600] host = dynamic context = default canreinvite = no threewaycalling = yes

Hi again folks! ;) As before, I will transform one E1 30 Channel PRI into 30 FXS channels using Adit 600. Now I'm into choosing server platform. And the two opponents are: * Dell PowerEdge 750 w/ SCSI RAID (or even SATA RAID1) * FujistuSiemens PRIMERGY RX100 S2 (SATA RAID1) As I've seen people having problem with HP server, I havn't looked at it at all. What experience do you

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 It seems like Asterisk are having problems detecting DTMF digits when using an Adit 600 channel bank via MGCP. I've tried to turn on RFC 2833 on both Adit and Asterisk, but no digits at all are working then. Anyone experienced simular with Adit or other channel banks? I'm also unable to use V.90 modem through my setup (Adit600 via MGCP -

I am forklifting a Merridian option 51c with 112 Nortel Digital Handsets and 400 analog units. For the analog units I have quotes for 9 ADIT 600 48 port fxs units and 17 Rhino 24 port FXS channel banks. I have used neither. Which is the best choice? The price difference is not that great. I am looking at Citelinks 24 port Handset Gateway for the Nortel Digital units. (Any other suggestions

Has anyone ever heard of this so called Dynamic Impedance matching on the ADIT 600? I called their support and they've never heard of it. We are of course having echo problems are on the far end due to digital/analog conversion on the local end using a channel bank. We have purchased an ADIT 600 and yes the complaints are "far less" however we're still getting them. While I have

Jon, I actually had some more discussions with Tim on this issue, and it seems that the channel bank would still be a good option to choose for internal purposes. I would not see any other solution than a channel bank to connect many 2wire phones into one asterisk box. I had a talk today with Carrier Access, and it seems that the adit would do us fine. The fxs cards of the adit 600 are

I have an adit 600 with one fxo card connected to a Digium single span T1 card. CallerID, disconnect supervision work perfect, however the users complain that they have some sound quality issues, after testing it I realized that whenever one is in a phone call they get like silence between the sounds coming from the other party, almost like a cell phone, in other words if there is no sound coming

FYI, Follow the Quick Start Guide from Carrier Access to setup the CMG (Customer Media Gateway) Router card. Follow the Asterisk mgcp.conf wiki page setup. The only issue I had was with the CAC CMG card, it defaults to strict policy message exchange and dial-tone will not come across when you go off-hook on a FXS port. To resolve this, get back into the CAC CMG configuration, goto: -profile