brett-asterisk@worldcall.net
2005-Mar-16 14:00 UTC
[Asterisk-Users] MGCP Channel Lockup and other probelms
Hi All, I'm trying to hook up asterisk (CVS-HEAD-02/09/05-13:44:11 ) to a ADIT 600 via MGCP. Got it working really nice but now have a pretty bad problem: 1. When I perform a flash on the telephone, I usually get a second dialtone, but when I dial, dialtone doesn't break. If I flash back and forth a few times, it will eventually give me no dialtone.. here if I dial, it successfully completes a call. 2. While trying to get the dialing to work. The MGCP channel hung. the call came in IAX.. I hung up the originating channel (IAX side) and it never reported the hangup.. now I see: Mar 16 14:12:12 WARNING[8904]: channel.c:523 ast_channel_walk_locked: Avoided deadlock for 'MGCP/aaln/1@192.168.10.5-1', 10 retries! over and over.. Show channels shows: IAX2/utxaustin01@utxaustin01/2 (cp-austin 5125551234 1 ) Ring Dial MGCP/aaln/1@192.168.10.5-1 soft hangup on the IAX side dosen't do anything soft hangup on the MGCP side things it's not a valid channel tab completion in the CLI seems to be sluggish and locks the CLI sometimes (have to ctrl-c and go back in with asterisk -r) mgcp reload doesn't do anything (now it says it's waiting for the previous reload to finish) unload chan_mgcp.so says it's being used unload -f chan_mgcp.so says it failed. haven't tried unload -h yet.. scared.. Any ideas? what may have caused these problems and how do I get out of this mess without restarting the whole system? BTW, SIP calls are completing just fine.. Thanks, Brett
post your mgcp.conf (mask out any ips if you need to) duane cox ----- Original Message ----- From: <brett-asterisk@worldcall.net> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Wednesday, March 16, 2005 3:00 PM Subject: [Asterisk-Users] MGCP Channel Lockup and other probelms> Hi All, > I'm trying to hook up asterisk (CVS-HEAD-02/09/05-13:44:11 ) to a ADIT 600 > via MGCP. Got it working really nice but now have a pretty bad problem: > > 1. When I perform a flash on the telephone, I usually get a second > dialtone, but when I dial, dialtone doesn't break. If I flash back and > forth a few times, it will eventually give me no dialtone.. here if I > dial, it successfully completes a call. > 2. While trying to get the dialing to work. The MGCP channel hung. the > call came in IAX.. I hung up the originating channel (IAX side) and it > never reported the hangup.. now I see: > Mar 16 14:12:12 WARNING[8904]: channel.c:523 ast_channel_walk_locked: > Avoided deadlock for 'MGCP/aaln/1@192.168.10.5-1', 10 retries! > over and over.. > > Show channels shows: > IAX2/utxaustin01@utxaustin01/2 (cp-austin 5125551234 1 ) Ring Dial > MGCP/aaln/1@192.168.10.5-1 > > soft hangup on the IAX side dosen't do anything > soft hangup on the MGCP side things it's not a valid channel > tab completion in the CLI seems to be sluggish and locks the CLI sometimes > (have to ctrl-c and go back in with asterisk -r) > > mgcp reload doesn't do anything (now it says it's waiting for the previous > reload to finish) > > unload chan_mgcp.so says it's being used > unload -f chan_mgcp.so says it failed. > > haven't tried unload -h yet.. scared.. > > > Any ideas? what may have caused these problems and how do I get out of > this mess without restarting the whole system? BTW, SIP calls are > completing just fine.. > > Thanks, > Brett > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >