Hi, Anybody out there running Adit600s? I have in my care an Adit600 channel bank connected to an old (version 1.0.6) Asterisk instance with MGCP. When trying a more recent Asterisk (1.4.21.2~dfsg-3+lenny1, Stock current Debian) calls fail. I have attempted to add the "slowsequence = yes" line to mgcp.conf. (It seemed to be the only likely candidate in the example files I found online.) No improvement. A working configuration or any other tips and ideas regarding this would be most welcome. Thank you in advance. Magnus Persson Log output: Jul 21 13:59:18 crabbofix asterisk[2689]: NOTICE[6220]: chan_mgcp.c:3564 in mgcp_request: Asked to get a channel of unsupported format '0' Jul 21 13:59:18 crabbofix asterisk[2689]: NOTICE[6220]: channel.c:2901 in __ast_request_and_dial_uniqueid: Unable to request channel MGCP/aal n/30 at adit.westel.nt and Jul 21 16:11:01 crabbofix asterisk[2689]: NOTICE[6263]: rtp.c:788 in process_rfc3389: Comfort noise support incomplete in Asterisk (RFC 3389). Please turn off on client if possible. Client IP: 192.168.30.10 mgcp.conf (relevant parts) [general] port = 2427 ;port = 2727 bindaddr = 192.168.30.1 disallow = all allow = alaw [adit.westel.nt] host = 192.168.30.10 context = westel callgroup = 0 pickupgroup = 0 transfer = no cancallforward = no canreinvite = no dtmfmode = inband ;dtmfmode = rfc2833 wcardep=* ; define the internal lines callerid = "Westel" <069022130> line => aaln/1 line => aaln/2 line => aaln/3 line => aaln/4 ; remove all features transfer = no cancallforward = no canreinvite = no context = newmrg ;dtmfmode = rfc2833 dtmfmode = inband ; define "old" TeleVaxel callerid = "MRG" <2150> line => aaln/5 line => aaln/6 line => aaln/7 (snip)... Adit configuration (relevant parts): adit> print config ------------------------------------------------------------- -Adit 600 configuration file -Created on 01/24/2002 at 02:32:23 -This file is valid for the following configuration only: - - CardType - -------- -SLOT A ITE SW Version: 9.0.0 -SLOT 1 FXS8Ax8 -SLOT 2 FXS8Ax8 -SLOT 3 FXS8Ax8 -SLOT 4 FXS8Ax8 -SLOT 5 FXS8Ax8 -SLOT 6 CMGx1 (snip)... -Setting slot 6 CMG. (snip)... set 6:1 up set 6 snmp name "unknown" set 6 snmp contact "unknown" set 6 snmp location "unknown" set 6 ntp server 192.168.30.1 set 6 ntp timezone 1 set 6 ntp enable set 6 cdr enable set 6 hookflash 0 set 6 mgcp addressformat nobrackets set 6 mgcp callagent address 192.168.30.1 set 6 mgcp callagent port 2427 set 6 mgcp up set 6 mgcp rsipwildcard enable set 6 voip ptime g711mu 10 set 6 voip ptime g711a 10 set 6 voip rtcp cname "adit" set 6 compander alaw set 6 voip sdpaddress gatewayid set 6:1:1:1 log start mgcp set 6:1:1:1-48 algorithm preference g711mu g711a g726_16 g726_24 g726_32 \ g726_40 set 6:1:1:4 echo cancellation disable set 6:1:1:4 fax bypass set 6:1:1:4 modem bypass reset 6 -Turning verification on. set verification on adit>