asterisk users - Feb 2005 - Adit 600 MGCP configuration

I've finally got my Adit 600 and are configuring it right now.
But I have to say, there aren't much documentation for it.
I've setup MGCP and Asterisk seems to find it.
But all channels (40 FXS channels) are "Down"!
But the MGCP itself is "Up" according to the statistics.
I can't find any documents how to set each channel to "Up" in the
CLI.

Any suggestions?

Thanks!

On Mon, 2005-02-21 at 16:33 +0100, Daniel Nystr?m wrote:
> I've finally got my Adit 600 and are configuring it right now.
> But I have to say, there aren't much documentation for it.
> I've setup MGCP and Asterisk seems to find it.
> But all channels (40 FXS channels) are "Down"!
> But the MGCP itself is "Up" according to the statistics.
> I can't find any documents how to set each channel to "Up" in
the CLI.
Go get the documentation from CAC. It shouldn't be that difficult to get
the big PDF file and have docs for all the cards.
-- 
Steven Critchfield <critch@basesys.com>

I don't believe the adit 600 has an up/down for channels.
Are the channels connected to something. ?You might
look at the 'connect' command and see if that helps.
To bring the FXS channels up on my box I needed to 
connect them to the T1 (in your case it would be the MGCP)
The t1 syntax is I believe 'connect a:01:1-8 1:1-8' ?The MGCP
should be similiar but would probably be something other
than a as it is presumably in a different slot.

As far as more documentation, the adit 600 user manual 
seems to be plenty adequate (the pdf version is over 12Meg)
I believe it is available on their website, if you have problems
finding it, contact me offlist and I can send you a copy.


Hope this helps,


Jon.

On Monday 21 February 2005 09:33 am, Daniel Nystr?m
wrote:
> I've finally got my Adit 600 and are configuring it right now.
> But I have to say, there aren't much documentation for it.
> I've setup MGCP and Asterisk seems to find it.
> But all channels (40 FXS channels) are "Down"!
> But the MGCP itself is "Up" according to the statistics.
> I can't find any documents how to set each channel to "Up" in
the CLI.
>
> Any suggestions?
>
> Thanks!
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users