similar to: TxFax/SpanDSP problems

Hi list, Just installed spandsp. In my limiting testing, I have an issue on a Philips fax machine (HFC21) directly connected to my * server through TDM400, reception with rxfax works fine, but txfax always fails. Below is a transcript of failed transmit. This is with asterisk-1.0.3 (with native moh patch but I don't think it is the source of the problem). I already tried libtiff 3.5.7,

Hello folks! I'm trying yo set up a email2fax and fax2email on my asterisk box. The rxfax works fine in my setup. The problem is with the txfax. I have tryed all snadsp version (0.0.2x and 0.0.3x) but I get this errors. Because I can't find anything on Internet I'm hoping u can give me a hand. here are my logs: -- Attempting call on SIP/sip_provider/1234 for application

I've been using spandsp and rxfax to receive faxes for a while now and over the past few days I've looked into the other side of things - txfax. I can't seem to get it working properly. I've included debug logs below of both the tx and rx side of things. I've tried three different servers, asterisk v1.0.6, 1.0.9 and CVS, FC2 and FC4, libtiff 3.5.7 and 3.7.1, TE405P and

Hi, I'm trying to send a fax from a Zap channel to another Zap channel and I can't - below the logs. How could I solve this? Thanks! In RECEIVER: -- Accepting call from '' to '1980' on channel 0/2, span 1 Urgent handler -- Executing Answer("Zap/2-1", "") in new stack Urgent handler Urgent handler -- Executing Goto("Zap/2-1",

I am also having problems receiving my first fax. I get a 320byte file (for a 4 page fax). If I look a the tiff generated, is just has some few dots. I am sending the fax from a notebook with Windows XP to an X100P and using libtiff v3.5.7. Has anyone successfully received faxes ? Output to the console as follows: Changed from phase 0 to 1 > Start receiving document > Changed from

Hi, spandsp-0.0.2pre18 works fine for txfax with HT488(version-1.0.1.2), but rxfax doesn't work. After some FAX sounds, it hangup! Could someone tell me how to debug? The following is the * CLI> log to 192.168.0.161:43222 -- Executing NoOp("SIP/4881-bde9", "") in new stack -- Executing RxFAX("SIP/4881-bde9",

Hi Ppl. Once, couple weeks ago when I have updated * from CVS-HEAD something happen and I could not send a fax anymore. After that I have tried previous * CVS versions with different versions of spandsp (0.0.1, 0.0.2pre4, 0.0.2pre10) but without any changes. I have tried that on Fedora Core 2 with libtiff-3.5.7-16.1 and libtiff-devel-3.5.7-16.1. Everything compiles smoothly, but when I try to send

Hi all, After a long time having no time, I have finally done some fresh work on my software fax machine. I have replaced the original carrier tracking with something more robust. I have also added 4800, and 2400 bits per second modes, and cleaned up a few bugs in areas like superfine mode operation. I apologise for this update taking so long. At ftp://ftp.opencall.org/pub/spandsp you will

Hello, I tryed out spandsp with libtiff-3.5.7 and with Asterisk from CVS. I tryed to receive a fax on a CAPI channel. Finally I got a file with 8 byte length (/tmp/testfax.tif). How can I do next? Thanks in advance, Thomas ps: what are hardware requirements for sending/receiving faxes? -- creating pipe for PLCI=0x101 msn = 2258589 > sent ALERT_REQ PLCI = 0x101 --

Hi, I have tried to install and configure the FAX app using the steps described in several mails on this list. When a FAX call arrives on X100P, the fax extension is executed, which looks like: exten => fax,1,RxFax(/var/spool/asterisk/incoming/${CALLERIDNUM}.tif) exten => fax,2,Hangup It tries to negociate, but nothing is received at the end and the other part times out. More, after this

Hi all, I have installed FAX app as described in several mails. When a fax call is received, I get the following in the * console: -- Starting simple switch on 'Zap/1-1' -- Executing Answer("Zap/1-1", "") in new stack -- Executing Ringing("Zap/1-1", "") in new stack -- Executing Wait("Zap/1-1", "2") in new stack

Can someone explain me what's going on and why the receiver of this fax guives up saying communication error? Slow carrier up Slow carrier down Slow carrier up <<< CSI: 40 20 20 20 20 20 20 20 34 39 34 35 36 34 39 35 30 20 39 33 2b CSI without final frame tag Remote fax gave CSI as: "+39 059465494 " <<< DIS: 80 00 ee f8 c4 00 DIS with final frame tag In

Hi all, I'm using txfax and rxfax to send and receive faxes. I find that txfax performs very well when sending to an old fax machine. However, when trying to send to a Mac (OS X) that accepts faxes, I get a "Trainability test failed" message on the * console (full console log below). I'm OK with being unable to fax to Mac, as I'm just using it to test. For future

Hi, I am trying to receive a fax with the spandsp library. The sending fax says "success" but there is no tiff file generated. I use "exten => 7000,1,rxfax(/tmp/testfax.tif)" in my extensions.conf. The connection is via SIP/G.711 as I have read on the list that this can sometimes work (I know Fax over IP is troublesome without T.38). I think the transmission should not

Hi, I am trying to recice a fax with * using SpanDSP - but it doesn't create the output file. (See the bottom of log file). * Loads both app_rxfax.so and app_txfax.so fine. Also I can't make * autodetect an incomming fax call (yes I have enabled faxdetect=both in zapata.conf - though it's not a Zap device) Any ideas are welcome :-) Best Regards Michael L?jtnant System Details:

Hi all, Trying to get fax reception going using a voicetronix openline4 card, however, there are two issues (as far as I can see) (1) Currently the voicetronix world (cards, firmware, drivers, channel prog etc.) does not do fax tone detection. I have spoken to the voicetronix guys , understand what has to happen there and may do some hacking if I can resolve the second issue. Meanwhile, I

Initial handshake sounds fine, but asterisks dies before receive of the fax. Here is the log : Changed from phase 0 to 1 Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow

Hello, I have installed SpanDSP and the apps txfax an rxfax. Unfortunately I am having problems sending faxes. I only get cancelled transfers. I am trying to send a fax to a ISDN card connected to a zap channel. I am using following call file: ------------------------------- Channel: ZAP/g1/25 MaxRetries: 0 WaitTime: 20 Application: txfax Data: /tmp/lVD3wy.tiff|caller Asterisk shows:

I'm trying to send a fax to my asterisk box, however shortly after connecting the fax machine reports a "communication error" and hangs up. Below is the error I get from RxFax: Fast carrier training failed Nothing is written to the file system as far as the tiff is concerned. Any ideas on how to fix this? Thanks ---- Sending Fax Machine: HP PSC 2000 Series 2210

Here's one last plea for help from the list before I give up on the totally cool software FAX modem concept in complete despair (for now, at least, until I have more time to dig into it).... I am simply not able to successfully receive a FAX no matter what device I transmit from or how I bring the call into Asterisk. My lastest effort was a call from a Pitney-Bowes FAX machine into an X100P