Hello,
I tryed out spandsp with libtiff-3.5.7 and with Asterisk from CVS.
I tryed to receive a fax on a CAPI channel. Finally I got a file with
8 byte length (/tmp/testfax.tif).
How can I do next?
Thanks in advance,
Thomas
ps: what are hardware requirements for sending/receiving faxes?
-- creating pipe for PLCI=0x101 msn = 2258589
> sent ALERT_REQ PLCI = 0x101
-- started pbx on channel!
-- Executing RxFAX("CAPI[contr1/2258589]/4",
"/tmp/testfax.tif") in new stack
-- CAPI Answering for MSN 2258589
Changed from phase 0 to 1
> sent FACILITY_REQ (PLCI=0x101)
Start receiving document
Changed from phase 1 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T4 timeout in state 9
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T2 timeout
Start receiving document
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T4 timeout in state 9
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T2 timeout
Start receiving document
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7>>> DIS: 80 00 c6 f0 80 80 01
-- CAPI Hangingup
> sent DISCONNECT_B3_REQ NCCI=0x10101
> sent DISCONNECT_REQ PLCI=0x101
-- removed pipe for PLCI = 0x101
Ya dont say.. same problem here! :P On Wed, 29 Oct 2003, Thomas wrote:> > Hello, > > I tryed out spandsp with libtiff-3.5.7 and with Asterisk from CVS. > > I tryed to receive a fax on a CAPI channel. Finally I got a file with > 8 byte length (/tmp/testfax.tif). > > How can I do next? > > Thanks in advance, > Thomas > > ps: what are hardware requirements for sending/receiving faxes? > > > -- creating pipe for PLCI=0x101 msn = 2258589 > > sent ALERT_REQ PLCI = 0x101 > -- started pbx on channel! > -- Executing RxFAX("CAPI[contr1/2258589]/4", "/tmp/testfax.tif") in new stack > -- CAPI Answering for MSN 2258589 > Changed from phase 0 to 1 > > sent FACILITY_REQ (PLCI=0x101) > Start receiving document > Changed from phase 1 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T4 timeout in state 9 > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T2 timeout > Start receiving document > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T4 timeout in state 9 > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T2 timeout > Start receiving document > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T2 timeout > Start receiving document > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T4 timeout in state 9 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T2 timeout > Start receiving document > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T4 timeout in state 9 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T2 timeout > Start receiving document > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T4 timeout in state 9 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T2 timeout > Start receiving document > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T4 timeout in state 9 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T2 timeout > Start receiving document > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T4 timeout in state 9 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T2 timeout > Start receiving document > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T4 timeout in state 9 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T2 timeout > Start receiving document > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T4 timeout in state 9 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T2 timeout > Start receiving document > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T4 timeout in state 9 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T2 timeout > Start receiving document > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T4 timeout in state 9 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > HDLC underflow in state 9 > Changed from phase 4 to 3 > T2 timeout > Start receiving document > Changed from phase 3 to 4 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > T4 timeout in state 9 > Sending ident > >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20 > DIS: > Store and forward Internet fax: no > Real-time Internet fax: no > Preferred octets: 256 > Can receive fax > Data signalling rate: V.29 > R8x7.7lines/mm and/or 200x200pels/25.4mm OK > 2D coding OK > Scan line length: 215mm > Recording length: A4 (297mm) > Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > R8x15.4lines/mm OK > Inch-based resolution preferred: no > Metric-based resolution preferred: no > Minimum scan line time for higher resolutions: T15.4 = T7.7 > >>> DIS: 80 00 c6 f0 80 80 01 > -- CAPI Hangingup > > sent DISCONNECT_B3_REQ NCCI=0x10101 > > sent DISCONNECT_REQ PLCI=0x101 > -- removed pipe for PLCI = 0x101 > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >
Hi all, Also got a problem with the RxFax app, I'm using the following packages, spandsp-20031021 tiff-v3.6.0 Asterisk CVS-12/10/03-20:28:08 Using the Digium TE410P card on a E1/PRI line. The tiff files under /var/spool/asterisk/incoming/, are a 8-byte file, and a 314-byte file. Because it could be useful, here are the links to the tiff files, http://www.geek.be/314byte.tif and 8byte.tif Errorlog, -- Redirecting Zap/94-1 to fax extension Changed from phase 0 to 1 Start receiving document Changed from phase 1 to 4 Sending ident>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20DIS: Store and forward Internet fax: no Real-time Internet fax: no Preferred octets: 256 Can receive fax Data signalling rate: V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Inch-based resolution preferred: no Metric-based resolution preferred: no Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 c6 f0 80 80 01HDLC underflow in state 9 Changed from phase 4 to 3 TSI: 43 33 34 20 33 33 20 33 39 32 20 33 20 32 33 2b 20 20 20 20 20 TSI without final frame tag Remote fax gave TSI as: "XXXXX" <<< DCS: 83 00 86 f0 80 80 00 DCS with final frame tag In state 9 DCS: Store and forward Internet fax: no Real-time Internet fax: no Can receive fax Data signalling rate: V.29, 9600bps 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Minimum scan line time: 0ms Inch-based resolution preferred: no Metric-based resolution preferred: no Minimum scan line time for higher resolutions: T15.4 = T7.7 Get at V.29 Changed from phase 3 to 5 Fast carrier up Fast carrier down Changed from phase 5 to 4 0 bad bits in trainability test Start rx document - compression 2 Start rx page>>> CFR: 84HDLC underflow in state 5 Post trainability Changed from phase 4 to 5 Fast carrier up Fast carrier down Fast carrier up Fast carrier down Fast carrier up Fast carrier down Fast carrier up Equalizer state: -7 ( 0.00000, 0.00000) -> 0.00000 -6 ( 0.00000, 0.00000) -> 0.00000 -5 ( 0.00000, 0.00000) -> 0.00000 -4 ( 0.00000, 0.00000) -> 0.00000 -3 ( 0.00000, 0.00000) -> 0.00000 -2 ( -0.63884, -0.00593) -> 0.40816 -1 ( 0.60024, -0.69352) -> 0.84127 0 ( 2.38472, -1.30660) -> 7.39409 1 ( 0.60024, -0.69352) -> 0.84127 2 ( -0.63884, -0.00593) -> 0.40816 3 ( 0.00000, 0.00000) -> 0.00000 4 ( 0.00000, 0.00000) -> 0.00000 5 ( 0.00000, 0.00000) -> 0.00000 6 ( 0.00000, 0.00000) -> 0.00000 7 ( 0.00000, 0.00000) -> 0.00000 Equalizer state: -7 ( 0.07399, -0.23718) -> 0.06173 -6 ( -0.49173, -0.28062) -> 0.32054 -5 ( -0.38216, -0.07909) -> 0.15230 -4 ( 0.22680, 0.02959) -> 0.05231 -3 ( 0.19558, -0.20995) -> 0.08233 -2 ( -1.24388, -0.30523) -> 1.64040 -1 ( -0.37542, -0.66984) -> 0.58962 0 ( 2.01893, -0.79479) -> 4.70777 1 ( 1.09151, -0.07333) -> 1.19677 2 ( -0.00396, 0.26975) -> 0.07278 3 ( 0.19550, -0.11260) -> 0.05090 4 ( -0.16577, -0.06202) -> 0.03133 5 ( 0.04504, 0.28773) -> 0.08482 6 ( 0.39692, 0.42868) -> 0.34131 7 ( 0.38502, 0.05679) -> 0.15146 Equalizer state: -7 ( 0.22360, -0.02394) -> 0.05057 -6 ( -0.18552, 0.06568) -> 0.03873 -5 ( -0.18051, -0.04777) -> 0.03486 -4 ( 0.31533, -0.01858) -> 0.09978 -3 ( 0.31532, -0.05151) -> 0.10208 -2 ( -0.77896, -0.14284) -> 0.62718 -1 ( 0.29655, -0.95560) -> 1.00111 0 ( 2.33765, -1.47601) -> 7.64322 1 ( 0.65812, -0.47013) -> 0.65415 2 ( -0.69647, 0.45421) -> 0.69137 3 ( 0.04736, 0.16423) -> 0.02921 4 ( 0.15850, -0.25609) -> 0.09070 5 ( -0.00046, -0.07383) -> 0.00545 6 ( -0.15791, 0.26325) -> 0.09424 7 ( 0.08403, -0.17968) -> 0.03935 Fast carrier trained Equalizer state: -7 ( 0.22152, -0.02127) -> 0.04952 -6 ( -0.19472, 0.06331) -> 0.04193 -5 ( -0.18801, -0.05253) -> 0.03811 -4 ( 0.31716, -0.01907) -> 0.10096 -3 ( 0.31783, -0.04633) -> 0.10316 -2 ( -0.78488, -0.13795) -> 0.63507 -1 ( 0.28830, -0.95461) -> 0.99440 0 ( 2.33529, -1.47672) -> 7.63430 1 ( 0.65981, -0.46594) -> 0.65245 2 ( -0.70048, 0.46170) -> 0.70384 3 ( 0.03818, 0.16592) -> 0.02899 4 ( 0.15309, -0.26460) -> 0.09345 5 ( 0.00484, -0.08268) -> 0.00686 6 ( -0.14832, 0.26350) -> 0.09143 7 ( 0.08740, -0.17184) -> 0.03717 Fast carrier down Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 0 (got 713, expected 1728). Page 1 of /var/spool/asterisk/incoming/XXXX.tif: 1 rows/1810 bytes received 0 total bad rows 0 max consecutive bad rows Changed from phase 5 to 3 <<< TSI: 43 33 34 20 33 33 20 33 39 32 20 33 20 32 33 2b 20 20 20 20 20 TSI without final frame tag Remote fax gave TSI as: "XXXXX" <<< DCS: 83 00 86 f0 80 80 00 DCS with final frame tag In state 5 DCS: Store and forward Internet fax: no Real-time Internet fax: no Can receive fax Data signalling rate: V.29, 9600bps 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Minimum scan line time: 0ms Inch-based resolution preferred: no Metric-based resolution preferred: no Minimum scan line time for higher resolutions: T15.4 = T7.7 Get at V.29 Changed from phase 3 to 5 Fast carrier up Fast carrier down Fast carrier up Fast carrier down Fast carrier up Equalizer state: -7 ( 0.00000, 0.00000) -> 0.00000 -6 ( 0.00000, 0.00000) -> 0.00000 -5 ( 0.00000, 0.00000) -> 0.00000 -4 ( 0.00000, 0.00000) -> 0.00000 -3 ( 0.00000, 0.00000) -> 0.00000 -2 ( -0.52063, -0.38378) -> 0.41835 -1 ( 0.89905, -0.12536) -> 0.82401 0 ( 2.71327, 0.51194) -> 7.62390 1 ( 0.89905, -0.12536) -> 0.82401 2 ( -0.52063, -0.38378) -> 0.41835 3 ( 0.00000, 0.00000) -> 0.00000 4 ( 0.00000, 0.00000) -> 0.00000 5 ( 0.00000, 0.00000) -> 0.00000 6 ( 0.00000, 0.00000) -> 0.00000 7 ( 0.00000, 0.00000) -> 0.00000 Equalizer state: -7 ( 0.16659, -0.16463) -> 0.05486 -6 ( -0.15527, -0.52340) -> 0.29806 -5 ( -0.18949, -0.27310) -> 0.11049 -4 ( 0.12068, 0.14716) -> 0.03622 -3 ( 0.23420, -0.07230) -> 0.06008 -2 ( -0.76236, -1.01280) -> 1.60696 -1 ( 0.20652, -0.71573) -> 0.55492 0 ( 2.09350, 0.67576) -> 4.83940 1 ( 0.82541, 0.64706) -> 1.10000 2 ( -0.21149, 0.20273) -> 0.08583 3 ( 0.24112, 0.02449) -> 0.05874 4 ( -0.10061, -0.15708) -> 0.03480 5 ( -0.15996, 0.25630) -> 0.09128 6 ( 0.02586, 0.57362) -> 0.32971 7 ( 0.22396, 0.26275) -> 0.11920 Equalizer state: -7 ( 0.14989, 0.11386) -> 0.03543 -6 ( -0.18216, -0.09263) -> 0.04176 -5 ( -0.09789, -0.11985) -> 0.02395 -4 ( 0.20449, 0.18410) -> 0.07571 -3 ( 0.27840, 0.11212) -> 0.09008 -2 ( -0.43388, -0.60832) -> 0.55830 -1 ( 0.93525, -0.50181) -> 1.12651 0 ( 2.72550, 0.40138) -> 7.58947 1 ( 0.65982, 0.08975) -> 0.44341 2 ( -0.91041, -0.11212) -> 0.84142 3 ( -0.02094, 0.09248) -> 0.00899 4 ( 0.29856, -0.11553) -> 0.10249 5 ( 0.02570, -0.02876) -> 0.00149 6 ( -0.28420, 0.11363) -> 0.09368 7 ( 0.21137, -0.09060) -> 0.05289 Fast carrier trained Equalizer state: -7 ( 0.14696, 0.11965) -> 0.03591 -6 ( -0.17684, -0.09324) -> 0.03997 -5 ( -0.08929, -0.13080) -> 0.02508 -4 ( 0.20574, 0.17557) -> 0.07315 -3 ( 0.26849, 0.11673) -> 0.08571 -2 ( -0.44779, -0.59813) -> 0.55827 -1 ( 0.92544, -0.49916) -> 1.10560 0 ( 2.72283, 0.39473) -> 7.56961 1 ( 0.66099, 0.08710) -> 0.44450 2 ( -0.91125, -0.10469) -> 0.84134 3 ( -0.02509, 0.10273) -> 0.01118 4 ( 0.29806, -0.11306) -> 0.10162 5 ( 0.03337, -0.03336) -> 0.00223 6 ( -0.27635, 0.11061) -> 0.08861 7 ( 0.20702, -0.08621) -> 0.05029 Fast carrier down Changed from phase 5 to 4 22 bad bits in trainability test>>> FTT: 44HDLC underflow in state 5 Post trainability Changed from phase 4 to 5 Fast carrier up Fast carrier down Fast carrier up Fast carrier down Fast carrier up Equalizer state: -7 ( 0.00000, 0.00000) -> 0.00000 -6 ( 0.00000, 0.00000) -> 0.00000 -5 ( 0.00000, 0.00000) -> 0.00000 -4 ( 0.00000, 0.00000) -> 0.00000 -3 ( 0.00000, 0.00000) -> 0.00000 -2 ( -0.62466, 0.70166) -> 0.88252 -1 ( 0.66313, 0.44179) -> 0.63491 0 ( 2.56479, -0.62906) -> 6.97384 1 ( 0.66313, 0.44179) -> 0.63491 2 ( -0.62466, 0.70166) -> 0.88252 3 ( 0.00000, 0.00000) -> 0.00000 4 ( 0.00000, 0.00000) -> 0.00000 5 ( 0.00000, 0.00000) -> 0.00000 6 ( 0.00000, 0.00000) -> 0.00000 7 ( 0.00000, 0.00000) -> 0.00000 Equalizer state: -7 ( 0.00329, 0.02968) -> 0.00089 -6 ( -0.01318, 0.02572) -> 0.00084 -5 ( -0.00369, 0.04544) -> 0.00208 -4 ( 0.00552, 0.06230) -> 0.00391 -3 ( 0.00202, 0.03567) -> 0.00128 -2 ( -0.62295, 0.71374) -> 0.89749 -1 ( 0.65935, 0.47300) -> 0.65847 0 ( 2.53644, -0.55296) -> 6.73930 1 ( 0.65168, 0.48873) -> 0.66354 2 ( -0.53708, 0.64834) -> 0.70880 3 ( 0.14012, -0.16406) -> 0.04655 4 ( 0.01261, -0.11454) -> 0.01328 5 ( -0.16274, 0.03765) -> 0.02790 6 ( -0.07437, 0.09020) -> 0.01367 7 ( 0.15995, -0.05766) -> 0.02891 Equalizer state: -7 ( 0.25933, 0.72974) -> 0.59978 -6 ( -0.30350, -0.11436) -> 0.10519 -5 ( -0.00582, 0.24773) -> 0.06140 -4 ( 0.18700, 0.65533) -> 0.46443 -3 ( 0.17302, 0.06984) -> 0.03481 -2 ( -0.63775, 0.48231) -> 0.63934 -1 ( -0.06593, 0.62803) -> 0.39877 0 ( 0.86963, 0.04727) -> 0.75850 1 ( -0.90702, 0.43429) -> 1.01129 2 ( -0.59322, -0.19810) -> 0.39116 3 ( 1.94959, -1.24573) -> 5.35274 4 ( 1.60269, -0.46197) -> 2.78202 5 ( -0.24288, 0.46725) -> 0.27731 6 ( -0.79577, 0.34651) -> 0.75332 7 ( 0.36390, 0.21735) -> 0.17966 Fast carrier training failed Equalizer state: -7 ( 0.22170, 0.75546) -> 0.61987 -6 ( -0.32341, -0.03986) -> 0.10618 -5 ( -0.03261, 0.22264) -> 0.05063 -4 ( 0.13667, 0.51733) -> 0.28630 -3 ( 0.12906, -0.03836) -> 0.01813 -2 ( -0.65165, 0.49752) -> 0.67217 -1 ( -0.05600, 0.69591) -> 0.48743 0 ( 0.88977, 0.05488) -> 0.79471 1 ( -0.89445, 0.37124) -> 0.93785 2 ( -0.62541, -0.23598) -> 0.44682 3 ( 1.85684, -1.18376) -> 4.84914 4 ( 1.50612, -0.34292) -> 2.38600 5 ( -0.27204, 0.52608) -> 0.35077 6 ( -0.78280, 0.30636) -> 0.70663 7 ( 0.34548, 0.16309) -> 0.14595 Fast carrier down Fast carrier up Fast carrier down Fast carrier up Fast carrier down Fast carrier up Equalizer state: -7 ( 0.00000, 0.00000) -> 0.00000 -6 ( 0.00000, 0.00000) -> 0.00000 -5 ( 0.00000, 0.00000) -> 0.00000 -4 ( 0.00000, 0.00000) -> 0.00000 -3 ( 0.02991, -0.06153) -> 0.00468 -2 ( -0.17612, -0.93257) -> 0.90071 -1 ( -0.76128, 0.25012) -> 0.64210 0 ( -0.73347, 2.56244) -> 7.10409 1 ( -0.76128, 0.25012) -> 0.64210 2 ( -0.17612, -0.93257) -> 0.90071 3 ( 0.02991, -0.06153) -> 0.00468 4 ( 0.00000, 0.00000) -> 0.00000 5 ( 0.00000, 0.00000) -> 0.00000 6 ( 0.00000, 0.00000) -> 0.00000 7 ( 0.00000, 0.00000) -> 0.00000 Equalizer state: -7 ( -0.10372, 0.32224) -> 0.11460 -6 ( 0.16629, 0.14146) -> 0.04766 -5 ( -0.20786, 0.15009) -> 0.06573 -4 ( -0.38855, 0.42276) -> 0.32969 -3 ( -0.17463, 0.29093) -> 0.11514 -2 ( 0.26782, -0.94955) -> 0.97338 -1 ( -0.16364, -0.31144) -> 0.12377 0 ( -0.59737, 2.02350) -> 4.45140 1 ( -0.97838, -0.06504) -> 0.96146 2 ( -0.39901, -0.90550) -> 0.97914 3 ( 0.34281, -0.17951) -> 0.14975 4 ( 0.34742, -0.35503) -> 0.24675 5 ( 0.06336, -0.44087) -> 0.19838 6 ( -0.18076, -0.24714) -> 0.09375 7 ( 0.17735, -0.07262) -> 0.03673 Equalizer state: -7 ( -0.69596, 0.06228) -> 0.48824 -6 ( 0.23247, -0.47420) -> 0.27891 -5 ( -0.31608, -0.27001) -> 0.17281 -4 ( -0.49043, -0.09651) -> 0.24983 -3 ( -0.29126, 0.10245) -> 0.09533 -2 ( 0.29254, -0.30442) -> 0.17825 -1 ( -0.01188, 0.93322) -> 0.87103 0 ( -0.33915, 2.57840) -> 6.76319 1 ( -0.48038, -0.27987) -> 0.30909 2 ( -0.16332, -1.46205) -> 2.16425 3 ( 0.09048, 0.16966) -> 0.03697 4 ( -0.21233, 0.09581) -> 0.05426 5 ( -0.19841, -0.34576) -> 0.15892 6 ( -0.20977, -0.60279) -> 0.40736 7 ( -0.25096, -0.03501) -> 0.06421 Fast carrier training failed Equalizer state: -7 ( -0.71344, 0.08999) -> 0.51710 -6 ( 0.23244, -0.43816) -> 0.24602 -5 ( -0.32354, -0.24955) -> 0.16696 -4 ( -0.47887, -0.07535) -> 0.23500 -3 ( -0.23948, 0.13805) -> 0.07641 -2 ( 0.35005, -0.30081) -> 0.21302 -1 ( -0.01808, 0.87422) -> 0.76458 0 ( -0.39200, 2.53144) -> 6.56187 1 ( -0.51223, -0.24522) -> 0.32251 2 ( -0.15951, -1.38762) -> 1.95093 3 ( 0.08134, 0.22429) -> 0.05692 4 ( -0.23125, 0.12176) -> 0.06830 5 ( -0.16923, -0.29900) -> 0.11804 6 ( -0.14784, -0.52741) -> 0.30002 7 ( -0.23431, 0.03127) -> 0.05588 Fast carrier down Fast carrier up Fast carrier down Fast carrier up Fast carrier down Fast carrier up Equalizer state: -7 ( 0.00000, 0.00000) -> 0.00000 -6 ( 0.00000, 0.00000) -> 0.00000 -5 ( 0.00000, 0.00000) -> 0.00000 -4 ( 0.00000, 0.00000) -> 0.00000 -3 ( -0.00116, -0.18446) -> 0.03403 -2 ( -0.39345, -0.85355) -> 0.88334 -1 ( -0.68526, 0.50154) -> 0.72113 0 ( -0.19005, 2.62613) -> 6.93269 1 ( -0.68526, 0.50154) -> 0.72113 2 ( -0.39345, -0.85355) -> 0.88334 3 ( -0.00116, -0.18446) -> 0.03403 4 ( 0.00000, 0.00000) -> 0.00000 5 ( 0.00000, 0.00000) -> 0.00000 6 ( 0.00000, 0.00000) -> 0.00000 7 ( 0.00000, 0.00000) -> 0.00000 Equalizer state: -7 ( -0.02193, 0.31797) -> 0.10159 -6 ( 0.20579, 0.14362) -> 0.06298 -5 ( -0.18247, 0.21995) -> 0.08167 -4 ( -0.28653, 0.44823) -> 0.28301 -3 ( -0.08789, 0.18553) -> 0.04215 -2 ( 0.09459, -0.91719) -> 0.85018 -1 ( -0.20036, -0.13169) -> 0.05749 0 ( -0.18685, 2.04903) -> 4.23342 1 ( -1.02524, 0.17114) -> 1.08041 2 ( -0.63501, -0.78169) -> 1.01427 3 ( 0.29303, -0.27854) -> 0.16345 4 ( 0.26247, -0.37993) -> 0.21324 5 ( -0.02857, -0.52133) -> 0.27260 6 ( -0.23263, -0.24840) -> 0.11582 7 ( 0.15393, -0.06205) -> 0.02755 Equalizer state: -7 ( -0.75391, 0.23515) -> 0.62368 -6 ( 0.20869, -0.53561) -> 0.33043 -5 ( -0.36147, -0.18987) -> 0.16671 -4 ( -0.58777, 0.08606) -> 0.35288 -3 ( -0.25114, 0.03147) -> 0.06406 -2 ( 0.19212, -0.45785) -> 0.24654 -1 ( 0.14400, 0.93753) -> 0.89971 0 ( 0.36301, 2.64987) -> 7.15361 1 ( -0.53162, 0.00210) -> 0.28262 2 ( -0.48637, -1.29295) -> 1.90827 3 ( 0.06342, -0.00991) -> 0.00412 4 ( -0.19380, 0.12877) -> 0.05414 5 ( -0.19809, -0.32918) -> 0.14760 6 ( -0.24354, -0.28372) -> 0.13981 7 ( -0.22324, 0.10101) -> 0.06004 Fast carrier training failed Equalizer state: -7 ( -0.75819, 0.25981) -> 0.64236 -6 ( 0.21707, -0.49294) -> 0.29011 -5 ( -0.35536, -0.16634) -> 0.15395 -4 ( -0.56586, 0.11313) -> 0.33300 -3 ( -0.18729, 0.07510) -> 0.04072 -2 ( 0.26091, -0.45811) -> 0.27794 -1 ( 0.13445, 0.85656) -> 0.75176 0 ( 0.28328, 2.56516) -> 6.66029 1 ( -0.59068, 0.01826) -> 0.34924 2 ( -0.48292, -1.19669) -> 1.66529 3 ( 0.08519, 0.06748) -> 0.01181 4 ( -0.17500, 0.14066) -> 0.05041 5 ( -0.16124, -0.34143) -> 0.14257 6 ( -0.19909, -0.28270) -> 0.11956 7 ( -0.22179, 0.11887) -> 0.06332 Fast carrier down Fast carrier up Fast carrier down Fast carrier up Fast carrier down Fast carrier up Fast carrier down Fast carrier up -- Channel 1, span 4 got hangup Urgent handler Urgent handler -- Hungup 'Zap/94-1' Is there a fix/patch for this problem, or does the RxFax/TxFax not work with PRI lines ? Thanks
Hey Srs. I have a little problem with the next scenario: Internal Phone(801)<-->Asterisk(public IP) <--INTERNET-->ADSL Router<-->Budgetone(716) |-->ADSL Router<-->Budgetone(717) My sip.conf is the next: [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = outgoing ; Default for incoming calls srvlookup = yes ; Enable SRV lookups on outbound calls tos=lowdelay domain=AVANZADA7 maxexpirey=3600 ; Max length of incoming registration we allow defaultexpirey=120 ; Default length of incoming/outoing disallow=all ; Disallow all codecs allow=g729 allow=alaw [716] type=friend username=716 fromuser=716 fromdomain=AVANZADA7 secret=716 host=dynamic allow=g729 allow=alaw qualify=yes canreinvite=yes context=outgoing dtmfmode=info nat=yes [717] type=friend username=717 fromuser=717 fromdomain=AVANZADA7 secret=717 host=dynamic allow=g729 allow=alaw qualify=yes canreinvite=yes context=outgoing dtmfmode=info nat=yes [801] type=friend username=801 fromuser=801 secret=801 fromdomain=AVANZADA7 host=dynamic defaultip=192.168.0.185 allow=g729 allow=alaw allow=ulaw mailbox=801 context=outgoing canreinvite=no dtmfmode=info nat=no If I make a call from 716 or 717 to 801 have no problem, but If I try make a call from 717 to 716 or 716 to 717, signalling is correct but when a side pickup call, these call hangup. In console appear( warning: detected firewall/NAT type is UDP blocked) Any idea, srsergio
Hi there, i installed RxFAX/TxFAX with some troubles but i did it, so i have
some problems when i try to receibe a FAX, i got this error:
" Executing RxFAX("IAX2/servera@servera/16385",
/var/spool/asterisk/incoming/16227743.tif") in new stack
Dec 27 15:30:54 NOTICE[1141895616]: channel.c:1731 ast_set_read_format: Unable
to find a path from ALAW to UNKN
Dec 27 15:30:54 WARNING[1141895616]: app_rxfax.c:264 rxfax_exec: Unable to
restore read format on 'IAX2/servera@servera/16385' "
This server is using IAX with other PBX Box in other place, both of them are
using G729 for IAX conection.
Any help would be useful.
Thanks for your help
Carlos Andres Medina
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 250MB free storage. Do more. Manage less.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20041227/aee45c10/attachment.htm
Hi!
Anyone meet with the following problem?
May 12 15:51:44 WARNING[14399] channel.c: Unable to find a codec translation
path from ulaw to unknown
May 12 15:51:44 WARNING[14399] app_txfax.c: Unable to restore read format on
'SIP/neopost1-8083'
May 12 15:51:44 WARNING[14399] channel.c: Unable to find a codec translation
path from ulaw to unknown
May 12 15:51:44 WARNING[14399] app_txfax.c: Unable to restore write format on
'SIP/neopost1-8083'
May 12 15:51:44 DEBUG[14399] cdr_addon_mysql.c: cdr_mysql: inserting a CDR
record.
May 12 15:51:44 NOTICE[14399] pbx_spool.c: Call completed to
SIP/neopost1/0676505921
May 12 15:51:44 DEBUG[14420] app_rxfax.c:
=============================================================================May
12 15:51:44 DEBUG[14420] app_rxfax.c: Fax successfully received.
May 12 15:51:44 DEBUG[14420] app_rxfax.c: Remote station id:
May 12 15:51:44 DEBUG[14420] app_rxfax.c: Local station id:
May 12 15:51:44 DEBUG[14420] app_rxfax.c: Pages transferred: 1
May 12 15:51:44 DEBUG[14420] app_rxfax.c: Image resolution: 7700 x 3850
May 12 15:51:44 DEBUG[14420] app_rxfax.c: Transfer Rate: 9600
May 12 15:51:44 DEBUG[14420] app_rxfax.c:
=============================================================================May
12 15:51:44 WARNING[14420] channel.c: Unable to find a codec translation path
from alaw to unknown
May 12 15:51:44 WARNING[14420] app_rxfax.c: Unable to restore read format on
'mISDN/2-1'
May 12 15:51:44 WARNING[14420] channel.c: Unable to find a codec translation
path from alaw to unknown
May 12 15:51:44 WARNING[14420] app_rxfax.c: Unable to restore write format on
'mISDN/2-1'
May 12 15:51:44 VERBOSE[14420] logger.c: == Spawn extension (ext-fax, in_fax,
5) exited non-zero on 'mISDN/2-1'
May 12 15:51:44 VERBOSE[14420] logger.c: -- Executing
Hangup("mISDN/2-1", "") in new stack
May 12 15:51:44 VERBOSE[14420] logger.c: == Spawn extension (ext-fax, h, 1)
exited non-zero on 'mISDN/2-1'
or any idea how to overcome?
--
WoodOO-[P]an[G]alaktikan[A]gent-People <][> http://shadow.pganet.com
wpeople@shadow.pganet.com]iCQ#33118021[wpeople.on.iRCNet]wpeople@RedHat.users