Martin Christian Koch
2004-Apr-19 15:05 UTC
[Asterisk-Users] spandsp/rxfax terminates asterisk
Initial handshake sounds fine, but asterisks dies before receive of the fax. Here is the log : Changed from phase 0 to 1 Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Start receiving document Changed from phase 1 to 4 Sending ident>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20DIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01HDLC underflow in state 9 Changed from phase 4 to 3 Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down Slow carrier up Slow carrier down T4 timeout in state 9 Changed from phase 3 to 4 Sending ident>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20DIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01T2 timeout Start receiving document Sending ident>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20DIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01HDLC underflow in state 9 Changed from phase 4 to 3 Slow carrier up <<< TSI: 43 30 36 37 37 36 31 36 35 20 35 34 2b 20 20 20 20 20 20 20 20 TSI without final frame tag Remote fax gave TSI as: "+45 56167760" <<< DCS: 83 00 46 20 DCS with final frame tag In state 9 DCS: Can receive fax Selected data signalling rate: V.29, 9600bps R8x7.7lines/mm and/or 200x200pels/25.4mm OK Scan line length: 215mm Recording length: A4 (297mm) Minimum scan line time: 10ms Get at 9600 Changed from phase 3 to 5 Fast carrier up Fast carrier down Fast carrier up Coarse carrier frequency 1700.00 (64) Training error 29.095569 Training succeeded (constellation mismatch 25.504344) Fast carrier trained Fast carrier down Changed from phase 5 to 4 Start rx document - compression 1 Start rx page asterisk in realloc(): warning: junk pointer, too high to make sense Oh dear!>>> CFR: 84HDLC underflow in state 5 Post trainability Changed from phase 4 to 5 Fast carrier up Coarse carrier frequency 1700.04 (64) Training error 26.487284 Training succeeded (constellation mismatch 27.123313) Fast carrier trained Segmentation fault (core dumped) Anyone ? Thanks, Martin _____ Min mail er beskyttet af SPAMfighter 3174 spam mails er blokeret indtil videre. Hent gratis SPAMfighter <http://www.spamfighter.com/> i dag! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040419/cdacae09/attachment.htm
I am getting random disconnects about 5-10 times a day. The logs show nothing except that the call was hung up. The calls are from X100P->*->digium T1 card->carrier access channel bank II->analogue phone. It is happening to all users. Is it possible that this is coming from busydetect=yes? Does busydetect detect cadences etc for the hangup frequencies? I have busycount=3... Any ideas? Any more information I could provide? Kind regards, Matt Riddell -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040419/dec21960/attachment.htm
Hi Matt, Increase your busycount to 6 or 7. I had that problem also with an X100P, and it went away increasing the busycount parameter. On Mon, 2004-04-19 at 20:28, Matt Riddell wrote:> I am getting random disconnects about 5-10 times a day. The logs show > nothing except that the call was hung up. The calls are from > X100P->*->digium T1 card->carrier access channel bank II->analogue > phone. It is happening to all users. Is it possible that this is > coming from busydetect=yes? > > Does busydetect detect cadences etc for the hangup frequencies? I > have busycount=3... > > Any ideas? Any more information I could provide? > > Kind regards, > > > Matt Riddell-- Nicolas Gudino <nicolas@house.com.ar> House Internet S.R.L.
My Asterisk prepaid debug is:
- Hungup 'Zap/2-1'
Urgent handler
-- Starting simple switch on 'Zap/2-1'
Urgent handler
-- Playing 'prepaid-enter-card-num' (language 'en')
Urgent handler
-- Playing 'prepaid-you-have' (language 'en')
Urgent handler
-- Playing 'digits/4' (language 'en')
Urgent handler
-- Playing 'digits/hundred' (language 'en')
Urgent handler
-- Playing 'prepaid-dollars' (language 'en')
Urgent handler
-- Playing 'prepaid-enter-dest' (language 'en')
Urgent handler
-- Playing 'prepaid-dest-blocked' (language 'en')
Urgent handler
-- Playing 'prepaid-dest-unreachable' (language 'en')
Why 'prepaid-dest-unreachable' ??????
Thks.
Regards
----- Original Message -----
From: Martin Christian Koch
To: asterisk-users@lists.digium.com
Sent: Monday, April 19, 2004 4:05 PM
Subject: [Asterisk-Users] spandsp/rxfax terminates asterisk
Initial handshake sounds fine, but asterisks dies before receive of the fax.
Here is the log :
Changed from phase 0 to 1
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Start receiving document
Changed from phase 1 to 4
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
T4 timeout in state 9
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
T2 timeout
Start receiving document
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
Slow carrier up
<<< TSI: 43 30 36 37 37 36 31 36 35 20 35 34 2b 20 20 20 20 20 20 20
20
TSI without final frame tag
Remote fax gave TSI as: "+45 56167760"
<<< DCS: 83 00 46 20
DCS with final frame tag
In state 9
DCS:
Can receive fax
Selected data signalling rate: V.29, 9600bps
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
Scan line length: 215mm
Recording length: A4 (297mm)
Minimum scan line time: 10ms
Get at 9600
Changed from phase 3 to 5
Fast carrier up
Fast carrier down
Fast carrier up
Coarse carrier frequency 1700.00 (64)
Training error 29.095569
Training succeeded (constellation mismatch 25.504344)
Fast carrier trained
Fast carrier down
Changed from phase 5 to 4
Start rx document - compression 1
Start rx page
asterisk in realloc(): warning: junk pointer, too high to make sense
Oh dear!
>>> CFR: 84
HDLC underflow in state 5
Post trainability
Changed from phase 4 to 5
Fast carrier up
Coarse carrier frequency 1700.04 (64)
Training error 26.487284
Training succeeded (constellation mismatch 27.123313)
Fast carrier trained
Segmentation fault (core dumped)
Anyone ?
Thanks,
Martin
------------------------------------------------------------------------------
Min mail er beskyttet af SPAMfighter
3174 spam mails er blokeret indtil videre.
Hent gratis SPAMfighter i dag!
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040419/0f1f59f7/attachment.htm