asterisk users - Dec 2003 - RxFAX application

Hi all,

I have installed FAX app as described in several mails.
When a fax call is received, I get the following in the * console:

    -- Starting simple switch on 'Zap/1-1'
    -- Executing Answer("Zap/1-1", "") in new stack
    -- Executing Ringing("Zap/1-1", "") in new stack
    -- Executing Wait("Zap/1-1", "2") in new stack
    -- Executing DBget("Zap/1-1",
"CIDTMP=phonebook/0722123456") in new
stack
    -- DBget: varname=CIDTMP, family=phonebook, key=0722123456
    -- DBget: set variable CIDTMP to Dan-Mobile
    -- Executing SetCallerID("Zap/1-1", "0722123456") in new
stack
    -- Executing SetCIDName("Zap/1-1", "Dan-Mobile") in new
stack
    -- Executing SetLanguage("Zap/1-1", "ro") in new stack
    -- Executing Dial("Zap/1-1",
"SIP/101&SIP/103&IAX/dan|30|Ttr") in new
stack
    -- Called 101
    -- Called 103
    -- SIP/101-65f1 is ringing
    -- SIP/103-7dda is ringing
    -- Redirecting Zap/1-1 to fax extension
  == Spawn extension (inbound-analog, fax, 0) exited non-zero on
'Zap/1-1'
  == Spawn extension (inbound-analog, fax, 1) exited non-zero on
'Zap/1-1'
    -- Hungup 'Zap/1-1'


This is what I have in extensions.conf:

[inbound-analog]
exten => fax,1,RxFAX(/var/spool/asterisk/incoming/${CALLERIDNUM}.tif)
exten => fax,2,Hangup

exten => s,1,Answer
exten => s,2,Ringing
exten => s,3,Wait(2)
exten => s,4,DBget(CIDTMP=phonebook/${CALLERIDNUM})
exten => s,5,SetCallerID(${CALLERIDNUM})
exten => s,6,SetCIDNAME(${CIDTMP})
exten => s,7,SetLanguage(ro)
exten => s,8,Dial(SIP/101&SIP/103&IAX2/dan,30,Ttr)
exten => s,9,Wait(1)
exten => s,10,Voicemail2(u101)
exten => s,9,Hangup
exten => s,109,Wait(3)
exten => s,110,Goto(8)

Hi,

I have started the * server in console mode (-vvvvvc) and this is what I get
now (no file saved and disconnected):

*CLI>
    -- Starting simple switch on 'Zap/1-1'
    -- Executing Answer("Zap/1-1", "") in new stack
    -- Executing Ringing("Zap/1-1", "") in new stack
    -- Executing Wait("Zap/1-1", "2") in new stack
    -- Executing DBget("Zap/1-1",
"CIDTMP=phonebook/0722123456") in new
stack
    -- DBget: varname=CIDTMP, family=phonebook, key=0722123456
    -- DBget: set variable CIDTMP to Dan-Connex
    -- Executing SetCallerID("Zap/1-1", "0722123456") in new
stack
    -- Executing SetCIDName("Zap/1-1", "Dan-Mobile") in new
stack
    -- Executing SetLanguage("Zap/1-1", "ro") in new stack
    -- Executing Dial("Zap/1-1",
"SIP/101&SIP/103&IAX/dan|30|Ttr") in new
stack
    -- Called 101
    -- Called 103
    -- SIP/101-f828 is ringing
    -- SIP/103-3b8b is ringing
    -- Redirecting Zap/1-1 to fax extension
  == Spawn extension (inbound-analog, fax, 0) exited non-zero on
'Zap/1-1'
    -- Executing RxFAX("Zap/1-1",
"/var/spool/asterisk/incoming/0722285952.tif") in new stack
Changed from phase 0 to 1
Start receiving document
Changed from phase 1 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T4 timeout in state 9
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
T2 timeout
Start receiving document
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T4 timeout in state 9
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
T2 timeout
Start receiving document
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T2 timeout
Start receiving document
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
T4 timeout in state 9
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 =
T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
<<< DCN: fb 00 c6 f0 80 80 01 0e cc 20 20 20
DCN with final frame tag
In state 9
Disconnecting
Changed from phase 3 to 7

Someone can help me?

Thank you,
Dan



----- Original Message ----- 
From: "Dan" <dtoma@fx.ro>
To: "Asterisk Users" <asterisk-users@lists.digium.com>
Sent: Sunday, December 07, 2003 10:08 AM
Subject: [Asterisk-Users] RxFAX application

> Hi all,
>
> I have installed FAX app as described in several mails.
> When a fax call is received, I get the following in the * console:
>
...

Hi Dan,

Dan wrote:
>Hi,
>
>I have started the * server in console mode (-vvvvvc) and this is what I get
>now (no file saved and disconnected):
>
>  
>
[....]

It seems the software FAX modem is sending out its messages regularly, 
but never hears anything recognisable come back from the far end FAX 
machine. That could mean nothing comes back, or something distorted 
(maybe a wrong codec) comes back.

Regards,
Steve

Hi Steve,

----- Original Message ----- 
From: "Steve Underwood" <steveu@coppice.org>
To: <asterisk-users@lists.digium.com>
Sent: Sunday, December 07, 2003 10:36 AM
Subject: Re: [Asterisk-Users] RxFAX application

> Hi Dan,
>
> Dan wrote:
>
> >Hi,
> >
> >I have started the * server in console mode (-vvvvvc) and this is what
I
get
> >now (no file saved and disconnected):
> >
> >
> >
> [....]
>
> It seems the software FAX modem is sending out its messages regularly,
> but never hears anything recognisable come back from the far end FAX
> machine. That could mean nothing comes back, or something distorted
> (maybe a wrong codec) comes back.
>
The fax is sent from a iPaq H3870 PocketPC through Bluetooth and GSM
(Ericsson T68i) using KSE TrueFax application.
I have tested before to see if it can be received on a standard FAX machine
and it work perfect.

What Fax Class is supported by your app?

Thanks,
Dan

Hi all,
	I have tested RxFAX application through X100P card. When Fax
arrive  i obtain the next trace:

     -- Starting simple switch on 'Zap/1-1'
    -- Executing Answer("Zap/1-1", "") in new stack
    -- Executing SetMusicOnHold("Zap/1-1", "random") in new
stack
    -- Executing WaitMusicOnHold("Zap/1-1", "5") in new
stack
    -- Started music on hold, class 'random', on Zap/1-1
    -- Redirecting Zap/1-1 to fax extension
    -- Stopped music on hold on Zap/1-1
  == Spawn extension (default, fax, 0) exited non-zero on 'Zap/1-1'
    -- Executing RxFAX("Zap/1-1",
"/var/spool/asterisk/fax/uno.tif") in
new stack Changed from phase 0 to 1 Start receiving document Changed
from phase 1 to 4 Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK Inch-based resolution preferred: no Metric-based
resolution preferred: no Minimum scan line time for higher resolutions:
T15.4 = T7.7
>>> DIS: 80 00 c6 f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
<<< TSI: 43 32 32 39 30 31 30 31 35 39 20 20 20 20 20 20 20 20 20 20 20
TSI without final frame tag Remote fax gave TSI as: "951010922"
<<< DCS:
83 00 c6 f0 80 80 00 DCS with final frame tag In state 9
DCS:
Store and forward Internet fax: no
Real-time Internet fax: no
Can receive fax
Data signalling rate: V.29, 9600bps
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Minimum scan line time: 0ms
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 = T7.7
Get at V.29
Changed from phase 3 to 5
Fast carrier up
Fast carrier down
Changed from phase 5 to 4
0 bad bits in trainability test
Start rx document - compression 2
Start rx page
>>> CFR: 84
HDLC underflow in state 5
Post trainability
Changed from phase 4 to 5
Fast carrier up
Fast carrier down
Fast carrier up
Fast carrier down
Fast carrier up
Fast carrier down
Fast carrier up
Equalizer state:
 -7 (        0.00000,         0.00000) ->         0.00000
 -6 (        0.00000,         0.00000) ->         0.00000
 -5 (        0.00000,         0.00000) ->         0.00000
 -4 (        0.00000,         0.00000) ->         0.00000
 -3 (        0.00000,         0.00000) ->         0.00000
 -2 (        0.25105,         0.74039) ->         0.61121
 -1 (       -0.87268,        -0.36304) ->         0.89337
  0 (       -1.79414,        -2.01854) ->         7.29345
  1 (       -0.87268,        -0.36304) ->         0.89337
  2 (        0.25105,         0.74039) ->         0.61121
  3 (        0.00000,         0.00000) ->         0.00000
  4 (        0.00000,         0.00000) ->         0.00000
  5 (        0.00000,         0.00000) ->         0.00000
  6 (        0.00000,         0.00000) ->         0.00000
  7 (        0.00000,         0.00000) ->         0.00000
Equalizer state:
 -7 (        0.00649,        -0.03380) ->         0.00118
 -6 (        0.02073,        -0.00508) ->         0.00046
 -5 (        0.03125,        -0.04397) ->         0.00291
 -4 (        0.02094,        -0.05189) ->         0.00313
 -3 (        0.00954,        -0.02848) ->         0.00090
 -2 (        0.26182,         0.72429) ->         0.59315
 -1 (       -0.84074,        -0.41198) ->         0.87657
  0 (       -1.76021,        -2.05082) ->         7.30420
  1 (       -0.85500,        -0.38151) ->         0.87658
  2 (        0.22413,         0.68563) ->         0.52033
  3 (       -0.03512,        -0.10808) ->         0.01291
  4 (       -0.02204,        -0.03244) ->         0.00154
  5 (        0.04513,         0.11010) ->         0.01416
  6 (        0.05265,         0.07431) ->         0.00829
  7 (       -0.01433,        -0.11280) ->         0.01293
Equalizer state:
 -7 (        0.14017,         0.08799) ->         0.02739
 -6 (       -0.18079,        -0.02633) ->         0.03338
 -5 (        0.00565,         0.03149) ->         0.00102
 -4 (        0.15813,        -0.07292) ->         0.03032
 -3 (       -0.28991,        -0.34523) ->         0.20324
 -2 (        0.10369,         0.59990) ->         0.37063
 -1 (        0.03284,        -0.02606) ->         0.00176
  0 (       -0.11463,        -0.90551) ->         0.83309
  1 (        0.03712,         0.71173) ->         0.50794
  2 (       -0.46280,         0.55488) ->         0.52208
  3 (       -1.38062,        -1.69745) ->         4.78743
  4 (       -0.95295,        -1.72961) ->         3.89964
  5 (        0.03678,         0.07704) ->         0.00729
  6 (        0.29737,         0.77668) ->         0.69166
  7 (       -0.14636,        -0.40090) ->         0.18214
Fast carrier training failed
Equalizer state:
 -7 (        0.10167,         0.06545) ->         0.01462
 -6 (       -0.18556,        -0.02461) ->         0.03504
 -5 (        0.03031,         0.02655) ->         0.00162
 -4 (        0.18932,        -0.08902) ->         0.04377
 -3 (       -0.27593,        -0.35412) ->         0.20154
 -2 (        0.10286,         0.60211) ->         0.37311
 -1 (        0.02693,        -0.04263) ->         0.00254
  0 (       -0.11627,        -0.93750) ->         0.89242
  1 (        0.05136,         0.71292) ->         0.51089
  2 (       -0.42897,         0.60647) ->         0.55182
  3 (       -1.34283,        -1.65177) ->         4.53153
  4 (       -0.93566,        -1.74854) ->         3.93285
  5 (        0.01456,         0.00457) ->         0.00023
  6 (        0.25813,         0.72770) ->         0.59617
  7 (       -0.16644,        -0.38103) ->         0.17289
Fast carrier down
Fast carrier up
Fast carrier down
Fast carrier up
Fast carrier down
Fast carrier up
Equalizer state:
 -7 (        0.00000,         0.00000) ->         0.00000
 -6 (        0.00000,         0.00000) ->         0.00000
 -5 (        0.00000,         0.00000) ->         0.00000
 -4 (        0.00000,         0.00000) ->         0.00000
 -3 (        0.00000,         0.00000) ->         0.00000
 -2 (       -0.01584,         0.69450) ->         0.48258
 -1 (       -0.63544,        -0.66028) ->         0.83976
  0 (       -1.27610,        -2.60252) ->         8.40156
  1 (       -0.63544,        -0.66028) ->         0.83976
  2 (       -0.01584,         0.69450) ->         0.48258
  3 (        0.00000,         0.00000) ->         0.00000
  4 (        0.00000,         0.00000) ->         0.00000
  5 (        0.00000,         0.00000) ->         0.00000
  6 (        0.00000,         0.00000) ->         0.00000
  7 (        0.00000,         0.00000) ->         0.00000
Equalizer state:
 -7 (        0.01729,        -0.02378) ->         0.00086
 -6 (        0.00842,        -0.00890) ->         0.00015
 -5 (        0.02844,        -0.01999) ->         0.00121
 -4 (        0.04652,        -0.02743) ->         0.00292
 -3 (        0.01867,        -0.02455) ->         0.00095
 -2 (       -0.00929,         0.67264) ->         0.45253
 -1 (       -0.60910,        -0.68078) ->         0.83446
  0 (       -1.22249,        -2.61184) ->         8.31617
  1 (       -0.61487,        -0.66761) ->         0.82377
  2 (       -0.02600,         0.63082) ->         0.39861
  3 (       -0.01942,        -0.09216) ->         0.00887
  4 (       -0.00753,        -0.01532) ->         0.00029
  5 (        0.00905,         0.11644) ->         0.01364
  6 (        0.03480,         0.07496) ->         0.00683
  7 (        0.02605,        -0.10599) ->         0.01191
Equalizer state:
 -7 (        0.12394,         0.07182) ->         0.02052
 -6 (       -0.23955,        -0.03540) ->         0.05864
 -5 (        0.02479,         0.00434) ->         0.00063
 -4 (        0.23746,        -0.07843) ->         0.06254
 -3 (       -0.13782,        -0.31438) ->         0.11783
 -2 (       -0.19560,         0.54387) ->         0.33406
 -1 (        0.11114,         0.07807) ->         0.01845
  0 (        0.09516,        -1.03824) ->         1.08700
  1 (       -0.15217,         0.70940) ->         0.52640
  2 (       -0.58077,         0.48989) ->         0.57728
  3 (       -0.73900,        -2.01423) ->         4.60325
  4 (       -0.21887,        -1.96429) ->         3.90635
  5 (        0.03451,        -0.13917) ->         0.02056
  6 (       -0.02000,         0.76330) ->         0.58303
  7 (       -0.00427,        -0.30750) ->         0.09457
Fast carrier trained
Equalizer state:
 -7 (        0.13597,         0.04992) ->         0.02098
 -6 (       -0.24706,        -0.04071) ->         0.06269
 -5 (        0.01439,         0.01149) ->         0.00034
 -4 (        0.24032,        -0.07076) ->         0.06276
 -3 (       -0.12811,        -0.31134) ->         0.11334
 -2 (       -0.19000,         0.54483) ->         0.33294
 -1 (        0.11261,         0.07616) ->         0.01848
  0 (        0.09853,        -1.04006) ->         1.09144
  1 (       -0.14424,         0.71451) ->         0.53133
  2 (       -0.56515,         0.49992) ->         0.56931
  3 (       -0.72070,        -2.01557) ->         4.58195
  4 (       -0.21312,        -1.98480) ->         3.98486
  5 (        0.01679,        -0.16590) ->         0.02781
  6 (       -0.04451,         0.75304) ->         0.56904
  7 (       -0.01415,        -0.29305) ->         0.08608
Fast carrier down
Segmentation fault

And i obtain 8 byte tif file.

Any Idea? I have installed tiff-3.5.7 and  spandsp-20031021. 


Best Regards,
srsergio

attempting to get asterisk pbx to receive inbound faxes 

have defined the necessary extension as per technote; 

default]
 ; Answer the line and listen
 exten => s,1,Answer
 ; Dial an extension, let asterisk give a ringtone
 exten => s,2,Dial(IAX2/3987,40,r)
 ; Hangup if nobody picked up within 40 seconds
 exten => s,3,Hangup

 ; Did we get a fax?
 exten => fax,1,SetVar(FAXFILE=/var/spool/asterisk-fax/${UNIQUEID}.tif)
 exten => fax,2,rxfax(${FAXFILE})


 and can see the SetVar command being executed but then the console echos; 

"pbx_extension_helper: No application 'rxfax' for extension
(pstn-incoming,fax,2)

the asterisk installation is very much the 'basic' install as per the
installation guide so i would guess this does not have this 'rxfax'
application

if this is correct can anyone assist with how i get the rxfax to run ??

GT