Michael LĂžjtnant
2004-Jun-18 02:37 UTC
[Asterisk-Users] Problems reciving fax with Asterisk
Hi, I am trying to recice a fax with * using SpanDSP - but it doesn't create the output file. (See the bottom of log file). * Loads both app_rxfax.so and app_txfax.so fine. Also I can't make * autodetect an incomming fax call (yes I have enabled faxdetect=both in zapata.conf - though it's not a Zap device) Any ideas are welcome :-) Best Regards Michael L?jtnant System Details: Lastest * CVS-HEAD Libtiff-3.5.7 Linux-2.6.6 kernel Fritz AVM ISDN Card extension.conf: [incomming] exten => s,1,Answer exten => s,2,rxfax("/tmp/minfax.tif") exten => s,3,hangup Console Log: -- Executing Answer("Modem[i4l]/ttyI0", "") in new stack -- Executing RxFAX("Modem[i4l]/ttyI0", "/tmp/minfax.tif") in new stack Changed from phase 0 to 1 Slow carrier up Slow carrier down Start receiving document Changed from phase 1 to 4 Sending ident>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20DIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01HDLC underflow in state 9 Changed from phase 4 to 3 T4 timeout in state 9 Changed from phase 3 to 4 Sending ident>>> CSI: 40 08 14 ce 18 f0 7a 15 af 14 c6 ef 10 e7 61 0b 44 1b 20 fb 59DIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01T2 timeout Start receiving document Sending ident>>> CSI: 40 08 14 ce 18 1b 38 0e a4 ec af e6 e4 06 02 1c 21 09 a9 e9 0cDIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01HDLC underflow in state 9 Changed from phase 4 to 3 T4 timeout in state 9 Changed from phase 3 to 4 Sending ident>>> CSI: 40 84 1c 0a 06 ae e5 65 f3 2b 17 ba 12 49 ec af e9 40 0e 0c 19DIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01T2 timeout Start receiving document Sending ident>>> CSI: 40 08 14 ce 18 19 b4 12 49 ef e8 e5 2c 01 8e 1b 78 0d bf eb b3DIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01HDLC underflow in state 9 Changed from phase 4 to 3 T2 timeout Start receiving document Changed from phase 3 to 4 Sending ident>>> CSI: 40 08 14 ce 18 01 8e 1b 78 0d bf eb b3 e7 61 07 04 1c 2e 08 aeDIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01T4 timeout in state 9 Sending ident>>> CSI: 40 08 14 ce 18 ec f0 12 8c 17 58 f2 dc e5 83 07 04 1c 01 ff 7bDIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01HDLC underflow in state 9 Changed from phase 4 to 3 T2 timeout Start receiving document Changed from phase 3 to 4 Sending ident>>> CSI: 40 08 14 ce 18 18 9e f8 fb e3 d1 f7 51 17 ba 15 76 f3 c9 e4 22DIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01T4 timeout in state 9 Sending ident>>> CSI: 40 84 1b 38 0e a4 ec af e6 e4 06 02 1c 21 09 a9 e9 0c e9 e1 0bDIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01HDLC underflow in state 9 Changed from phase 4 to 3 T2 timeout Start receiving document Changed from phase 3 to 4 Sending ident>>> CSI: 40 08 14 ce 18 ec f0 0e f0 1b 20 ff 7b e4 c7 f1 5b 13 50 19 1bDIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01T4 timeout in state 9 Sending ident>>> CSI: 40 84 1b 38 0e a4 ec af e6 e4 06 02 1c 21 09 a9 e9 0c e9 e1 0bDIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7>>> DIS: 80 00 ce f0 80 80 01HDLC underflow in state 9 Changed from phase 4 to 3 Slow carrier up <<< XCN: fa XCN with final frame tag In state 9 Disconnecting Changed from phase 3 to 7 Changed from phase 7 to 8 Jun 18 11:30:27 NOTICE[327684]: channel.c:1651 ast_set_read_format: Unable to find a path from SLINR to UNKN Jun 18 11:30:27 WARNING[327684]: app_rxfax.c:253 rxfax_exec: Unable to restore read format on 'Modem[i4l]/ttyI0' Jun 18 11:30:27 NOTICE[327684]: channel.c:1618 ast_set_write_format: Unable to find a path from UNKN to SLINR Jun 18 11:30:27 WARNING[327684]: app_rxfax.c:259 rxfax_exec: Unable to restore write format on 'Modem[i4l]/ttyI0' == Spawn extension (incomming, s, 2) exited non-zero on 'Modem[i4l]/ttyI0' -- Hungup 'Modem[i4l]/ttyI0' -- Med venlig hilsen / Best regards Michael L?jtnant - Systems Engineer ZyXEL Communications A/S Columbusvej 5 - 2860 S?borg Tel (+45) 3955 0700 - Fax (+45) 3955 0707