similar to: Polycom SoundPoint IP 500

This Polycom phone seems to be one of the best on the market for sound quality and features. I have seen on the list that some people have gotten the IP 600 to work with Asterisk. Does anyone have the details of how to get this working i.e. XML phone config files, and any thing else I might need to know. Thank You, Chad Cowan -------------- next part -------------- An HTML attachment

I am trying to use a Polycom Soundpoint IP400 with my asterisk setup, and have been unable to find the proper firmware and application files to make it work. The phone can access the FTP server, and downloads the IP500/600 configuration files, but claims that the sip.ld file is larger than its file system. I can think of two possible ways to make this work. One is to find the IP400

I am looking for a large number (probably about 100 or so) low-cost phones that I can hang on the wall. I need the phones to use PoE. Do the Uniden phones support wall-mounting? These phones are not going to be high-usage; they simply need to be there in case of an emergency. Another question, along the same kind of lines, has anyone figured out how to keep the SoundPoint IP 600 receiver

The company I work for has deployed an Avaya IP phone system. They have deployed the Avaya 4602 and 4620 IP telephones. They might be sending me one of these phones for use in my home office. Question: Can I make this IP telephone register and work with my Asterisk server? I don't know if it is a SIP phone? I searched thru the Avaya site, but can't find whether it's a SIP phone or

Could not find your post for 4 months ago. -------------- Original message -------------- From: "Anton Krall" <akrall-lists@intruder.com.mx> > Yes, check a post that I made about 4 months ago, I posted the cofig for > setting the speaker, handset and ring volumes .. > > |-----Original Message----- > |From: asterisk-users-bounces@lists.digium.com >

Does anyone have the Admin password for the phone in order to change configuration Roman

Hello, I am looking at the Polycom phones. The ip600 has a very nice screen, is that the only real advantage over the ip500 and ip300.. Is it worth the extra dollars? Kind regards Michael Felder IT Medic Australia Pty. Ltd. P: 03 9557 2213 F: 03 9557 2214 M: 0419 568 217 E: Michael@ITMedic.com.au <blocked::mailto:Michael@ITMedic.com.au> http://www.ITMedic.com.au

List, I am having trouble with one of our IP600. Every five days or so, the phone locks up. This is the third 600 I have put in place. I am running asterisk 1.0.9. Has anyone had this problem with the IP600? This electronic message transmission, including attachments, is for the exclusive use of the individuals to which this e-mail is addressed and is to be reviewed and used exclusively

Hi all, I have a Polycom Soundpoint IP 600 that looks like it is fried. It either has a bad or corrupt bootrom (I'm guessing). It never gets to the prompt that asks if I want to enter the setup configuration or continue booting. When plugged into power, it turns on, shows the Polycom logo for 3 seconds and then pretty much goes dead with two red lights on. The one in the top right corner

Has anyone been able to get the minibrowser on the Polycom SoundPoint IP 500/600 phones working? If so could you share the relevant sections of your config with me?

Hello, I have configured my polycom ip600 and ip500. The phone works well. But the clock is wrong and flashes the whole time. Drives me nuts! I have set the time offset on the DHCP / boot server. 36000 (I'm in Australia!) It doesn't seem to help... Mike

I'm trying to develop a company phone list accessible via the minibrowser feature on the phone. The pertinent section of ipmid.cfg is as follows: <microbrowser mb.proxy=""> <idleDisplay mb.idleDisplay.home="http://server/polycom/index.html" mb.idleDisplay.refresh="300"/> <main

Hi I am struggling with hardware choices to get started with. My options are narrowed down to SIP phones - Polycom IP500, IP600 and Cisco 7940G. of importance is: - functionality / integration with asterisk - headset functionality and use - voice quality - build quality Is there much of a difference between Polycom and Cisco? Scanning the group it looks like there may be slightly more

All, Slightly off topic. Polycom released their SIP software version 1.6.6 for their phones recently. I was under the impression that this release fixed a previous limitation where the phones would only watch 7 buddies, ie send 7 sip subscriptions to Asterisk. I have configured a phone directory to watch 30 or so appearances, and it still seems to only be sending 7 subscriptions to Asterisk.

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

Greetings all, My next step is to purchase a nice VoIP phone for my desk. I have a grandstream, and the sound is great, but I'm looking for more of an office style phone, preferably that can handle multiple lines, has a more flexible display (i.e. name as well as number). SIP would be preferable. Any suggestions? Thanks, Eric

Any advice on a good conference phone that works with Asterisk? I like the Cisco line and was wondering if anyone has used the 7935 or 7936 phones. From what I can tell they don't have a sip load. Has anyone verified this or gotten an ETA from Cisco? Chad -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, What is out there in terms of SIP enabled handsfree speakerphones? Looking for something that works well and also fits a low budget. I am used to using a Cisco 7940. It is a great phone but a bit expensive. Thought about the Polycom SoundPoint 300 until I realized that it does not include speakerphone functionality. Thanks, Adi

Hi Everyone, I've been asked to determine which phones our organization should go with. And I've narrowed it down to the Polycom IP500 or the Cisco 7940. From my travels through google, it's hard to find a definitive comparison of the two phones. So I thought I would ask the people that have probably used both. From what I can tell, the only major benefit the Cisco has over the

I've got a couple Shoreline IP phones, their Shoreline model number is Shoreline IP 100. I believe this is actually a Polycom SoundPoint IP 300 phone. I believe the phone is using a MGCP stack. I want to use it for testing with Asterisk. 1. I suspect I need to re-image the phone to make it work with *. 2. How can I preserve the current image on the phone? 3. What is preferred image to use