search for: t100

...as an oyster, consumes the oxygen. Each vial is calibrated before the experiment and these calibrations are used to convert the raw data after the experiment into oxygen values. I end up with two dataframes. One has the calibration data and for example could look like this vial cal0 T0 cal100 T100 1 61 18 28 18 2 60.8 18 27.1 18 3 60.2 18 28.3 18 4 59.8 18 27.2 18 The second is a data file which could look like this vial phase temp time 1 31 17.5 10 1 31.5 17.4 20 1 32.8...

...m having intermittant receipt of the DTMF. T-Berd testing is showing that the digits are coming across but * is either missing the first digit consistantly. This seems to me to have something to do with start timers or inter-digit dtmf timers or something. I have even tied 2 * together each with t100 cards and have the same problem. Not sure how to proceed, any suggestions? Jason Kawakami

Just purchased a couple of T100 and E100 cards in order to interface from our company's proprietary system through a linux gateway. I am new to Asterisk and Digium. After installing the T100 card, I went looking for drivers for this card. Are the drivers built into the Asterisk application? If so, how do I enable the card...

Hi All I am getting a strange prblem while installing TE420 on a Dell Poweredge T100 machine. I get a "TE4XXX: version Synchronisation error " nad the machine hangs which needs a hard reboot . Its a new machine and if i install TE410P then installation is successful. Strangely enough i have a working TE420F on another Dell POweredge T100 machine at a different locaiton .....

I just added 2 Digium T100 cards. When my * box boots, it found them and configured them. When I enter genzaptelconf, it comes back with the following error: line 13: Unable to open master device '/dev/zap/ctl' Unloading zaptel hardware drivers: Removing zaptel module: rmmod: module zaptel is not loaded...

First time doing a t-1 config with *. running FC2 and CVS as of last W/E. i run modprobe wct1xxp and I get "Unable to open master device '/dev/zap/ctl' i look at /dev and there isn't even a zap directory. i was looking around and found something in /udev that looks promising but not sure what the deal is. ztcfg returns 24 channels configured but the same notice at the bottom

Hi, I have a data file which is named test.txt as below. Prior to that, I have converted the last row from nominal to numeric using as.integer. Statement T1001 T1002 T1003 T1004 T1005 T100 T1014 T1021 T1022 T1023 1 0 0 0 0 0 0 0 0 1 0 0 2 0 0 0 0 0 0 0 0 1 0 0 3 0 1 0 0 1 0 0 0 1 0 0 4 406 pass pass fail pa...

Is there any way to receive and send faxes using a T100 card? If so how is it done? Gene Kochanowsky Solution Sciences, Inc.

Hi Folks, I'm trying to interface * with a PBX, but seems that his ring cadence is somewhat different, and my T100 doesn't show any call coming in. I've tried to change zaptel to new values but still couldn't make it work. Is there any other place where I should be changing some parameter? Is there any tool to measure the cadence timing that this pbx is providing? Thanks! PauloHM

...126 15:23:44:710,M3_02,4516,1129 15:23:44:710,M3_03,4498,1124 ... Each pos (eg M1_01) is an independent time series. I would like to plot each time series as lines on a single plot and I wondered if there was something more straight forward than I was attempting. I got as far as: fname = 't100.csv' t = read.csv(fname) tpos = split(t, t$pos) plot(tpos[["M1_01"]]$t, type='l') for (p in names(tpos)) { lines(tpos[[p]]$t) } which seems to work but then I got stuck on how to make each line a different colour and figured that there might a be a one liner R command...

Can anyone explain to me the difference in zaptel.conf and zapata.conf? I'm trying to get a real clear understanding of them but its getting a little murky in places. I will be setting up a PBX running asterisk with 2 T100P cards. I will be bringing a 23 channel PRI into one card and connecting the other card to a Nortell 24 channel FXS channel bank. As I understand it zapata.conf is how I configure my channels much like IAX.conf or SIP.conf. Where I'm a bit confused is I think I'm understanding it con...

...nsion in the channel context. If > it finds > it then the fax call is going to be routed according > to > the fax extension rule. > > regards > Martin > > On Mon, 3 Mar 2003, Gene Kochanowsky wrote: > > > Is there any way to receive and send faxes using a > T100 card? If so how is it done? > > > > Gene Kochanowsky > > Solution Sciences, Inc. > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users at lists.digium.com > > > http://lists.digium.com/mailman/li...

Hi, Have posted to this list a couple of times and have always received great responses and help. I have a basic * system setup Using 3 X100P cards with 6 Snom200 IP phones. It was a bit of a struggle getting everything up and running but have been pretty happy with the flexibility and ease of *. My major problem is one that has been discussed on this list many times before. The echo

...ne, sometimes available as machine.example.org and other times as machine.example.com. In order to be able to just "ssh machine", I currently have the following ProxyCommand in place: ProxyCommand bash -c "TARGETS=$(bash -c 'TRIES=machine.example.{org,com}; eval fping -aAC1 -t100 $TRIES; eval fping6 -aAC1 -t100 $TRIES; echo %h : 9999' 2>&1 | sed -rne 's, : ([[:digit:]]), @\1,p' | sort -t@ -k2n | sed -ne 's, .*,,p' | tr '\n' ','); nc -vq0 \${TARGETS%%%%,*} %p" which essentially pings all DNS names and uses the respond time...

Hello all, I have premisys 24 port fxs channel bank that is connected to a Wildcard T100 card. I also have a pri coming in from verizon that is going to another T100 card in my box. I've downloaded the latest CVS, I went into the file /etc/zaptel.conf and added the following lines: span=1,1,0,esf,b8zs span=2,0,0,esf,b8zs bchan=1-23 dchan=24 fxoks=25-48...

hello * users, i am using a zplex 10b(8fxosand 16fxs) connected to a T100 digium card, RH8.0. soon after running * i get this warning "file chan_zap.c,line 4155 (ss_thread):CallewrID returned with error on channel 'zap/7-1' then executes the other applications itself. --executing Wait("Zap/7-1","1") in new stack. -- executing..... i...

...e and suggestions will be appreciated........ On Thu, 23 Oct 2003, Don Pobanz wrote: > On Thursday, October 23, 2003 8:52 AM, austino@skannet.com > [SMTP:austino@skannet.com] wrote: > > > > > > hello * users, > > i am using a zplex 10b(8fxosand 16fxs) connected to a T100 digium > > card, > > RH8.0. > > > > soon after running * i get this warning > > > > "file chan_zap.c,line 4155 (ss_thread):CallewrID returned with error > > on > > channel 'zap/7-1' > > > > The zhone does not support inbound c...

Heh guys, I just received a T400 card, I've been using a T100 for a little while, and it works fine when using a raw channelized T1. I'm relocating my asterisk machine, and PRI's will only be available, haven't found any good config info for PRI's, can someone point me to PRI config info, or let me know what changes I need to make in order to...

...ersion 'schily-0.8'. cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). scsibus1: 1,0,0 100) 'SAMSUNG ' 'CDRW/DVD SM-308B' 'T100' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * Is there something that I am missing here? I do not have problems burning iso's with my Solaris box at the offi...

.... Much like the Flash Operator Panel. Desktop Software may also be needed for this purpose or can be done via a traditional bank of lines on an IP phone accessory module. If anyone has any ideas on the best way to put this together, I'm all ears ;-) I was going to use an OpenVOX card and Dell T100 box, with 12 Aastra 53i phones. There's a ?4k budget for this (still waiting for more into)which will include the networking connection and equipment. If I can afford it I normally go Sangoma with Echo cancellation, but as it's a fallback service, so I'm not bothered. I think I've...