I can't seem to make the fax detection work. Here's an excerpt from zapata.conf: signalling=fxs_ks group=0 context => guestaccess channel => 47-48 and from extensions.conf: [guestaccess] include => incomingmain [incomingmain] exten => s,1,Dial,Zap/1&Zap/9&Zap/10&Zap/11|24 exten => s,2,Voicemail,u7000 exten => s,3,Hangup exten => fax,1,Dial,Zap/3 When I dial in, Asterisk simply rings Zap channels 1, 9, 10, and 11, whether it's a fax or non-fax call. What am I missing? Thanks, D. --- Martin Pycko <martinp at digium.com> wrote:> From: Martin Pycko <martinp at digium.com> > To: <asterisk-users at lists.digium.com> > Subject: Re: [Asterisk-Users] Fax support? > Date: Mon, 3 Mar 2003 11:41:48 -0600 (CST) > > let's say you have one T1 span configured like this > in zapata.conf > > context=incoming > group = 1 > channel => 1-23 > > then in extensions.conf > [incoming] > exten => fax,1,Dial,Zap/25 #FXS port that fax is > plugged to > exten => _XXXXXXXXX,1,... (the rest) > > when asterisk detects fax tones on incoming call > it's going > to look for fax extension in the channel context. If > it finds > it then the fax call is going to be routed according > to > the fax extension rule. > > regards > Martin > > On Mon, 3 Mar 2003, Gene Kochanowsky wrote: > > > Is there any way to receive and send faxes using a > T100 card? If so how is it done? > > > > Gene Kochanowsky > > Solution Sciences, Inc. > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users at lists.digium.com > > >http://lists.digium.com/mailman/listinfo/asterisk-users> > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users at lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/
Might you want to Wait for a few seconds, then Answer the line, to give the tone detection a chance before passing a call to your desk extensions? -Tilghman On Tuesday 04 March 2003 01:59 pm, Darrell Eldridge wrote:> I can't seem to make the fax detection work. Here's > an excerpt from zapata.conf: > > signalling=fxs_ks > group=0 > > context => guestaccess > channel => 47-48 > > and from extensions.conf: > > [guestaccess] > include => incomingmain > > [incomingmain] > exten => s,1,Dial,Zap/1&Zap/9&Zap/10&Zap/11|24 > exten => s,2,Voicemail,u7000 > exten => s,3,Hangup > exten => fax,1,Dial,Zap/3 > > When I dial in, Asterisk simply rings Zap channels 1, > 9, 10, and 11, whether it's a fax or non-fax call. > What am I missing? > > Thanks, > > D. > > --- Martin Pycko <martinp at digium.com> wrote: > > From: Martin Pycko <martinp at digium.com> > > To: <asterisk-users at lists.digium.com> > > Subject: Re: [Asterisk-Users] Fax support? > > Date: Mon, 3 Mar 2003 11:41:48 -0600 (CST) > > > > let's say you have one T1 span configured like this > > in zapata.conf > > > > context=incoming > > group = 1 > > channel => 1-23 > > > > then in extensions.conf > > [incoming] > > exten => fax,1,Dial,Zap/25 #FXS port that fax is > > plugged to > > exten => _XXXXXXXXX,1,... (the rest) > > > > when asterisk detects fax tones on incoming call > > it's going > > to look for fax extension in the channel context. If > > it finds > > it then the fax call is going to be routed according > > to > > the fax extension rule. > > > > regards > > Martin > > > > On Mon, 3 Mar 2003, Gene Kochanowsky wrote: > > > Is there any way to receive and send faxes using a > > > > T100 card? If so how is it done? > > > > > Gene Kochanowsky > > > Solution Sciences, Inc. > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > Asterisk-Users at lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users at lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Tax Center - forms, calculators, tips, more > http://taxes.yahoo.com/ > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users at lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users
Fax detection doesn't work here either. It's probably a tone detection thing and needs to be tweaked.> -----Original Message----- > From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users- > admin at lists.digium.com] On Behalf Of Darrell Eldridge > Sent: Tuesday, March 04, 2003 3:00 PM > To: Asterisk-Users at lists.digium.com > Subject: Fwd: Re: [Asterisk-Users] Fax support? > > I can't seem to make the fax detection work. Here's > an excerpt from zapata.conf: > > signalling=fxs_ks > group=0 > > context => guestaccess > channel => 47-48 > > and from extensions.conf: > > [guestaccess] > include => incomingmain > > [incomingmain] > exten => s,1,Dial,Zap/1&Zap/9&Zap/10&Zap/11|24 > exten => s,2,Voicemail,u7000 > exten => s,3,Hangup > exten => fax,1,Dial,Zap/3 > > When I dial in, Asterisk simply rings Zap channels 1, > 9, 10, and 11, whether it's a fax or non-fax call. > What am I missing? > > Thanks, > > D. > > > --- Martin Pycko <martinp at digium.com> wrote: > > From: Martin Pycko <martinp at digium.com> > > To: <asterisk-users at lists.digium.com> > > Subject: Re: [Asterisk-Users] Fax support? > > Date: Mon, 3 Mar 2003 11:41:48 -0600 (CST) > > > > let's say you have one T1 span configured like this > > in zapata.conf > > > > context=incoming > > group = 1 > > channel => 1-23 > > > > then in extensions.conf > > [incoming] > > exten => fax,1,Dial,Zap/25 #FXS port that fax is > > plugged to > > exten => _XXXXXXXXX,1,... (the rest) > > > > when asterisk detects fax tones on incoming call > > it's going > > to look for fax extension in the channel context. If > > it finds > > it then the fax call is going to be routed according > > to > > the fax extension rule. > > > > regards > > Martin > > > > On Mon, 3 Mar 2003, Gene Kochanowsky wrote: > > > > > Is there any way to receive and send faxes using a > > T100 card? If so how is it done? > > > > > > Gene Kochanowsky > > > Solution Sciences, Inc. > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > Asterisk-Users at lists.digium.com > > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users at lists.digium.com > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Tax Center - forms, calculators, tips, more > http://taxes.yahoo.com/ > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users at lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users
Asterisk cannot detect a fax until *after* the line is answered. You'll need to answer the line and then dial if you want to use that feature. Mark On Tue, 4 Mar 2003, Darrell Eldridge wrote:> I can't seem to make the fax detection work. Here's > an excerpt from zapata.conf: > > signalling=fxs_ks > group=0 > > context => guestaccess > channel => 47-48 > > and from extensions.conf: > > [guestaccess] > include => incomingmain > > [incomingmain] > exten => s,1,Dial,Zap/1&Zap/9&Zap/10&Zap/11|24 > exten => s,2,Voicemail,u7000 > exten => s,3,Hangup > exten => fax,1,Dial,Zap/3 > > When I dial in, Asterisk simply rings Zap channels 1, > 9, 10, and 11, whether it's a fax or non-fax call. > What am I missing? > > Thanks, > > D. > > > --- Martin Pycko <martinp at digium.com> wrote: > > From: Martin Pycko <martinp at digium.com> > > To: <asterisk-users at lists.digium.com> > > Subject: Re: [Asterisk-Users] Fax support? > > Date: Mon, 3 Mar 2003 11:41:48 -0600 (CST) > > > > let's say you have one T1 span configured like this > > in zapata.conf > > > > context=incoming > > group = 1 > > channel => 1-23 > > > > then in extensions.conf > > [incoming] > > exten => fax,1,Dial,Zap/25 #FXS port that fax is > > plugged to > > exten => _XXXXXXXXX,1,... (the rest) > > > > when asterisk detects fax tones on incoming call > > it's going > > to look for fax extension in the channel context. If > > it finds > > it then the fax call is going to be routed according > > to > > the fax extension rule. > > > > regards > > Martin > > > > On Mon, 3 Mar 2003, Gene Kochanowsky wrote: > > > > > Is there any way to receive and send faxes using a > > T100 card? If so how is it done? > > > > > > Gene Kochanowsky > > > Solution Sciences, Inc. > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > Asterisk-Users at lists.digium.com > > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users at lists.digium.com > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Tax Center - forms, calculators, tips, more > http://taxes.yahoo.com/ > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users at lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >