search for: snom200

Hi, in the Snom FAQ I found the following information: After staring up, the phone tries the URL given in the "Setting URL" of the phone. ... BTW this setting can also be set via DHCP. .... option tftp-server-name "http://192.168.0.9/snom200{mac}.htm" The documents used: FAQ-04-06-14-sf.pdf "Setting up DHCP for snom phones" FAQ-04-03-24-sf.pdf "How can I update a snom phone?" The phone used is a snom 190 (snom190-SIP 3.52e). If I use the webinterface to insert the URL it works fine, but I am not able to se...

Alright, this may seem like something relatively easy to do but I must be missing something or had a neuron misfire. I am trying to get The Status lights on my Snom200 hardphones to display the status of each one of my PSTN lines in my Asterisk server. Current Config: 3 X100P cards Asterisk CVS-02/25/04-18:06:52 5 Snom200 phones I am currently using the following macro to dial out with my extensions [macro-stdexten] exten => s,1,Dial(${ARG2},20...

Hello. I have two snom200 ip phones and 1 mp108fxs (audiocodes 8 fxs) and i dont get a ring in the caller phone when I dial from a snom200 to the other snom200 or the mp108fxs, I made a debug with ethereal, and I can see a "Ringing" packet being return from the called snom200 or mp108fxs to the asterisk box, b...

...-------- next part -------------- Hello Though my SNOM 200 phone receive a voice mail but it doesn't show MWI on the LCD panel, Instead it keeps displaying "DND SW-REG,Call-log". Though I can access my voicemail using exten =>100,1,VoicemailMail() Current firmware on SNOM 200 is SNOM200-SIP 2.03h Am I missing something. Regards Tony

I am using the snom 200 with Phone type snom200-SIP Version snom200-SIP 2.04g Bootloader URL http://www.snom.com/download/snom200-boot1.9.bin Firmware URL http://www.snom.com/download/share/snom200-2.04o-SIP.bin I am using asterisk stable tree. I had to disable "Challenge Response on Phone"...

Sorry I forgot the subject in the last post. When my snom200 receives an inbound SIP external sip call, it somehow rejects the call and with a busy tone. The debug shows the following error: channel.c:1142 ast_read: Exception flag set on 'SIP/sipphone-7796', but no exception handler what does this mean and how can I debug it further??...

Try this one. Took me a while too. http://www.snom.com/download/share/snom200-2.05c-SIP.bin > -----Original Message----- > From: M3 Freak [mailto:m3freak@rogers.com] > Sent: Monday, May 17, 2004 11:42 AM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Snom200 Firmware: I only see 2.04g > > Hello all, > > I've noticed sever...

Hi all, -------- I have a Asterisk at a public Network (official IP address). In the local network I have isntalled a Snom 200 IP phone and in my home network (behind NAT) a Snom 100 device. I can dial the Snom200 device from my home location without any problems but the Snom200 can not dial me. It always gets a "we do not rely". I tried to forward the SIP Port (5060) UDP via UPnP to the internal Snom100 IPadress and a port range forwarding of 16384 - 32768 (UDP) for the RTP traffic. Addition...

...lto:asterisk-users-admin@lists.digium.com] On Behalf Of Frederic Steinfels Sent: Saturday, April 24, 2004 12:30 PM To: asterisk-users@lists.digium.com Subject: [SPAM] - [Asterisk-Users] snom reporting busy when it shouldn't - Email found in subject I am using the snom 200 with Phone type snom200-SIP Version snom200-SIP 2.04g Bootloader URL http://www.snom.com/download/snom200-boot1.9.bin Firmware URL http://www.snom.com/download/share/snom200-2.04o-SIP.bin I am using asterisk stable tree. I had to disable "Challenge Response on Phone"...

On recent releases of the snom200 firmware, the MWI indicator will turn on, but won't turn off when the message has been checked. It works on firmware 2.03o, but not in 2.04g or newer. I filed a bug report with snom, but they're claiming it is an asterisk issue and that it should have been resolved. They suggested that...

Hi, I have just been playing with the latest X-Lite.. It works fine with Asterisk.. As for codecs I tested G.711a/u, GSM and iLBC... iLBC is the only one that didn't work.. not sure why.. But the bigger problem is that when I call another extension that is using a Snom200 the call connects but there is no audio in either direction.. I have tried G.711a/u and GSM and while X-Lite shows that the correct codec is in use there is still no audio.. Is anyone using X-Lite?? are there any issues or work arounds that would help this situation? Later.. -- _________________...

Hello list, i am using: asterisk CVS-10/13/03-11:54:33 chan_capi-0.3.0 ATA-186 V2.16.1.ms over MGCP Situation: ISDN calls ATA ISDN speaks with ATA ATA-Phone presses Flash and speaks to another one (SIP/snom200) ATA-Phone hangs up ISDN talks to SIP/snom200 snom200 hangs up The incoming extension of ATA keeps busy for a time (20 sec?), even its not off-hook anymore! Any ideas? -- Swapping 0 for 1 on aaln/1@192.168.1.26 WARNING[10251]: File chan_mgcp.c, Line 2303 (handle_request): Transfer attempt f...

Hello all, I've noticed several messages about the latest firmware on Snom's site, 2.05b, and today I see that another update is listed, 2.05c. However, when I go to the download page (http://www.snom.com/support_dl_en.php), the latest firmware version available for the Snom200 is 2.04g. Are the newest firmware releases not yet available, or am I doing something stupid? Thanks, Kanwar Systems Aligned Inc. www.systemsaligned.com

Look like SNOM have rolled back the firmware version of the 200's from 1.16w to 1.16q.. Anyone know why? -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

When a Snom 200 (v2.1l) calls a C7960 (v4.4), both using g711u as default, the conversation is extremely noisy from the Snom to the Cisco, but clear in the reverse direction. Using a sniffer, I see packets from the Snom to the Cisco of 87 bytes and Cisco to Snom of 214 bytes. Asterisk is CVS from Saturday. The communications between the two was working fine on Saturday, however something has

Hello, Does anyone know how to conference a call on the SNOM 200 phone? Whenever I push the cnf/tran button it just hangs up on the active call. The manual says you have to push the cnf function key but it doesn't appear in the lcd on my phone. Thanks -Matt -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have more or less decided to do with the SNOM phones for the next stage of testing with Asterisk becasue they seem to be the best value for money and have support for the GSM codec and easy upgrades.. But now I have to decied wheather to get the 100 or 200 and if its the 200 then I need to have some justification for the extra cost.. Can someone who knows these 2 phones tell me what the

Hi folks, in order to establish backward compatibility we made an image that automatically detects if the other side does not support RFC3264. Please try it out, we would be very interested if this image is a progress! http://snom.com/download/share/snom200-2.03b-SIP.bin Thanks, CS

Hello, I'd like to be able to see if a channel is use and handle the call differently if it is. The best I can find is the command ChanIsAvail(). The problem is, I have an snom200 phone which does call waiting, so even if it is engaged in a call, a second channel is still available on it. I would like to be able to differentiate between these two cases: no calls engages, or calls engaged. Is there any way to do that? Turning off call waiting on the snom200 is not an...

Hi there, I tried to get a few "Optipoint 400 SIP" working with *, but it refused to work properly. In my testing-network i have two Sjphones (they are working really fine) and three optipoints. I?m able to dial the number of a Sjphone on all of the optipoints. The call is signalled at the Sjphone with the right number of the optipoint and an connection can be established. But when I