asterisk users - Jun 2004 - Siemens Optipoint 400 SIP Problem

Hi there,
I tried to get a few "Optipoint 400 SIP" working with *, but it
refused to work properly.
In my testing-network i have two Sjphones (they are working really fine) and
three optipoints.
I?m able to dial the number of a Sjphone on all of the optipoints.
The call is signalled at the Sjphone with the right number of the optipoint and
an connection can be established.

But when I try to call one of the optipoints from a Sjphone, or from one opti to
another, then no connection or signalling can be established.
But Asterisk tells me that 
== Everyone is busy at this time.

In my opinion, the optipoint is not registering correct to asterisk, when it is
connected to the network.(By the way, SJphone does register to asterisk)

So here is my question, does anyone suffer from the same problem and/or solved
it???

Thanks a lot,

greetz

Roland (erlangen/germany)

Hi!

I have updated the optipoint to the last  software version

I can Call the optipoint from other phones and talk.

The optipoint register with asterisk.... but in the phone display i have
only "no server....." and no dial tone.

The only way to register was with no password to the optipoint peer.

look at cli:

 -- Registered SIP 'optipoint' at 192.168.0.36 port 1028 expires 3600

    -- Executing Dial("SIP/snom200-da4c",
"SIP/optipoint|20|tr") in new
stack
    -- Called optipoint
    -- SIP/optipoint-a32b is ringing
    -- SIP/optipoint-a32b answered SIP/snom200-da4c
    -- Attempting native bridge of SIP/snom200-da4c and SIP/optipoint-a32b
  == Spawn extension (internal, 37, 1) exited non-zero on
'SIP/snom200-da4c'

asterisk-eth0*CLI> sip show peers
Name/username    Host                 Mask             Port     Status
optipoint/optip  192.168.0.36    (D)  255.255.255.255  1028     OK (130 ms)

maybe that helps

miklos

----- Original Message ----- 
From: <Roland.Knoerl@student.fh-nuernberg.de>
To: <asterisk-users@lists.digium.com>
Sent: Monday, June 21, 2004 3:23 PM
Subject: [Asterisk-Users] Siemens Optipoint 400 SIP Problem


Hi there,
I tried to get a few "Optipoint 400 SIP" working with *, but it
refused to
work properly.
In my testing-network i have two Sjphones (they are working really fine) and
three optipoints.
I?m able to dial the number of a Sjphone on all of the optipoints.
The call is signalled at the Sjphone with the right number of the optipoint
and an connection can be established.

But when I try to call one of the optipoints from a Sjphone, or from one
opti to another, then no connection or signalling can be established.
But Asterisk tells me that
== Everyone is busy at this time.

In my opinion, the optipoint is not registering correct to asterisk, when it
is connected to the network.(By the way, SJphone does register to asterisk)

So here is my question, does anyone suffer from the same problem and/or
solved it???

Thanks a lot,

greetz

Roland (erlangen/germany)

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users