Ryan R. Fligg
2004-Mar-03 10:01 UTC
[Asterisk-Users] Status Lights on Snom200 Phone Displaying the Status of PSTN Lines
Alright, this may seem like something relatively easy to do but I must be
missing something or had a neuron misfire. I am trying to get
The Status lights on my Snom200 hardphones to display the status of each one
of my PSTN lines in my Asterisk server.
Current Config:
3 X100P cards
Asterisk CVS-02/25/04-18:06:52
5 Snom200 phones
I am currently using the following macro to dial out with my extensions
[macro-stdexten]
exten => s,1,Dial(${ARG2},20,Ttr) ; Ring the interface, 20
seconds maximum
exten => s,2,Voicemail2(u${ARG1}) ; If unavailable, send to voicemail
w/ unavail announce
exten => s,3,Goto(default,s,1) ; If they press #, return to start
exten => s,102,Voicemail2(b${ARG1}) ; If busy, send to voicemail w/ busy
announce
exten => s,103,Goto(default,s,1) ; If they press #, return to start
My extension can then use this as follows:
exten => 202,1,Macro(stdexten,${USERVM},${USER})
I do not have an extension setup directly to dialout and I am thinking that
this might be part of my problem. I would also like to know the status of
certain extensions
To see who is on the phone and who is not by looking at the soft key light
on the Snom200. If anyone has any ideas, they would be greatly appreciated.
Sincerely,
Ryan R. Fligg
Secured Digital Storage, Inc.
104 SW 4th St.
Des Moines, IA 50309
Phone: (515)-244-6290
Cell: (720)-841-5802
Website: www.dstorage.com
E-Mail: rfligg@dstorage.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040303/908e3437/attachment.htm
Andre Bierwirth
2004-Jun-22 04:23 UTC
[Asterisk-Users] Status Lights on Snom200 Phone Displaying the Status of PSTN Lines
Current Config:
Asterisk CVS-04/01/03-05:52:52
3 SNOM 200's
1 SNOM 100
The Extension State Stuff exists in chan_sip !!!!!
Sorry i have some Changes in the Asterisk Extension State Source because this i
have never compiled a new Version.
In the current Asterisk CVS Version the SNOM 200 show you only FREE and BUSY
state, in my Version the Phone show the RINGING State,too.
I have a Patch for Extension State RINGING but Mark have never applied it to
CVS, i don't know why ??
In the next weeks i try to change my Asterisk Server to the current CVS Version.
Then i send a new Patch for RINGING State, i hope this time Mark commit it to
CVS. And i write a tutorial for SNOM200 Extension State in the next Weeks.
My old message to Mark Spencer was:
Date: 11.04.2003
If One or more Devices from a extension in Ringing state, the extension is
handeled as Ringing. The "Ringing" state has priority before the
"inuse" state. So a extension that is "inuse" and gets a
second call the new state is "ringing" for the time between the call
is taken or gone.
Snom200 Config:
Phone :: Settings :: Key Mapping
P1: Line
P2: Line
P3: Line
P4: Destination <sip:12@192.168.100.4>
P5: Destination <sip:13@192.168.100.4>
extensions.conf
exten => 11,hint,SIP/11 ; Hints!! to Map the Asterisk Extension to a SIP
Device Name
exten => 11,1,Dial,SIP/11|30|t
exten => 11,2,Dial,CAPI/0:b0610932839
exten => 11,3,Voicemail,u11 ; Send to voicemail...
exten => 12,hint,SIP/12
exten => 12,1,Dial,${HINT}|30|t
exten => 12,2,Voicemail,u12 ; Send to voicemail...
exten => 13,hint,SIP/13
exten => 13,1,Dial,${HINT}|30|t
exten => 13,2,Voicemail,u13 ; Send to voicemail...
exten => 14,hint,SIP/14
exten => 14,1,Dial,${HINT}|30|mt
exten => 14,2,Voicemail,u14 ; Send to voicemail...
Andre
----- Original Message -----
From: Ryan R. Fligg
To: asterisk-users@lists.digium.com
Sent: Wednesday, March 03, 2004 7:01 PM
Subject: [Asterisk-Users] Status Lights on Snom200 Phone Displaying the Status
of PSTN Lines
Alright, this may seem like something relatively easy to do but I must be
missing something or had a neuron misfire. I am trying to get
The Status lights on my Snom200 hardphones to display the status of each one
of my PSTN lines in my Asterisk server.
Current Config:
3 X100P cards
Asterisk CVS-02/25/04-18:06:52
5 Snom200 phones
I am currently using the following macro to dial out with my extensions
[macro-stdexten]
exten => s,1,Dial(${ARG2},20,Ttr) ; Ring the interface, 20
seconds maximum
exten => s,2,Voicemail2(u${ARG1}) ; If unavailable, send to voicemail
w/ unavail announce
exten => s,3,Goto(default,s,1) ; If they press #, return to start
exten => s,102,Voicemail2(b${ARG1}) ; If busy, send to voicemail w/
busy announce
exten => s,103,Goto(default,s,1) ; If they press #, return to start
My extension can then use this as follows:
exten => 202,1,Macro(stdexten,${USERVM},${USER})
I do not have an extension setup directly to dialout and I am thinking that
this might be part of my problem. I would also like to know the status of
certain extensions
To see who is on the phone and who is not by looking at the soft key light on
the Snom200. If anyone has any ideas, they would be greatly appreciated.
Sincerely,
Ryan R. Fligg
Secured Digital Storage, Inc.
104 SW 4th St.
Des Moines, IA 50309
Phone: (515)-244-6290
Cell: (720)-841-5802
Website: www.dstorage.com
E-Mail: rfligg@dstorage.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040622/0a8eaaf1/attachment.htm