search for: falc

...digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no alarm. Zapata Telephony Interface Registered on major 196 Registered Tormenta2 PCI Controller version: 24 FALC version: 00000000 TE110P: Setting up global serial parameters for E1 FALC V1.2 TE110P: Successfully initialized serial bus for card Found a Wildcard: Digium Wildcard TE110P T1/E1 Freshmaker version: 71 Freshmaker passed register test Uhhuh. NMI receiv...

hi, i have problem with pass-through faxing with this scenario hylafax(iaxmodem) - iax - asterisk1 1.2.22 - sip - asterisk2 1.2.X(xen virtual) - linksys ATA i can fax to fax2mail on hylafax but after upgrade asterisk2 to 1.4 faxing is not working hylafax(iaxmodem) - iax - asterisk1 1.2.22 - sip - asterisk2 1.4.X(xen virtual) - linksys ATA configuration is same do you hava any idea what is

...ay I did a cvs update to the latest head files, and the card is now not working. When I try a zaptel start, a series of messages appears on the console: Found TE410p at base address fdff0000, remapped to f8a34000 TE410P version c01a010b, burst ON, slip debug: OFF TE410P running with work queues. FALC version: 00000005, Board ID: 00 .. (a series of Reg Values) .. This driver does not support 1st gen modules and at the tty used to start the zaptel service: [root@foxtrot zaptel]# /etc/init.d/zaptel start Loading zaptel framework: [ OK ] Waiting for zap to come...

...issedCount":7,"Total":7}])") in new stack -- Executing [h at ext-queues:3] NoOp("SIP/100-00000050", "") in new stack -- Executing [h at ext-queues:4] Macro("SIP/100-00000050", "hangupcall,") in new st U can see that Execif = 0 = falce but somehow Shell ${SHELL(curl -X POST --header "Content-Type: application/json" --header "Accept: application/json" -d "{\"Phone\": ${FROMEXTEN}, \"Source\": \"asterisk\"}" " http://sIte.com:80/api/v1/calls?apiKey=UABVAEI&cl...

...] Waiting for zap to come online...OK Loading zaptel hardware modules:Running ztcfg: ZT_CHANCONFIG failed on channel 25: No such device or address (6) [FAILED] [root@asterisk etc]# dmesg TE110P: Setting up global serial parameters for T1 FALC V1.2 TE110P: Successfully initialized serial bus for card Found a Wildcard: Digium Wildcard TE110P T1/E1 [root@asterisk etc]# ztcfg -v Zaptel Configuration ====================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) 31 channels configured. ZT_CHANCONFIG failed on channel 25:...

...o about this or does this new firmware only work with latest CVS. I am using 1.0.9 with 2.6.12 kernel Zapata Telephony Interface Registered on major 196 Found TE4XXP at base address fdfff000, remapped to f8928000 TE4XXP version c01a0164, burst ON, slip debug: OFF TE4XXP running with work queues. FALC version: 00000005, Board ID: 00 Reg 0: 0x364e9400 Reg 1: 0x364e9000 Reg 2: 0xffffffff Reg 3: 0x00000000 Reg 4: 0x00000001 Reg 5: 0x00000000 Reg 6: 0xc01a0164 Reg 7: 0x00001f00 Reg 8: 0x00000000 Reg 9: 0x00ff0000 Reg 10: 0x00000000 TE4XXP: Launching card: 0 TE4XXP: Setting up global serial parameter...

Hello folks. I've got a strange issue. When I modprobe TE220 I do not see mesages like Launching card: 0 <..> Setting up global serial parameters. You can see how I loaded and unloaded the card for several times - http://asteriskpbx.ru/pastebin/11 lspci can detect the card: 03:08.0 Communication controller: Digium, Inc. Device 0220 (rev 02) dahdi_hardware also: astpbx ~ # dahdi_hardware

...got, I get the following: Found TE410P at base address fb7ffc00, remapped to e0220c00 TE410P version c01a009b Tried to load 1c8ac800 into 00000000, but got 188ac800 instead Tried to load 1c8ac000 into 00000001, but got 188ac000 instead Tried to load 07fc07fc into 00000002, but got 03fc07fc instead FALC version: 00000005, Board ID: 00 Reg 0: 0x188ac800 Reg 1: 0x188ac000 Reg 2: 0x03fc07fc Reg 3: 0x00000000 Reg 4: 0x00000000 Reg 5: 0x00000000 Reg 6: 0xc01a009b Reg 7: 0x00001f00 Reg 8: 0x00000000 Reg 9: 0x00ff0000 Reg 10: 0x00000000 TE410P: Launching card: 0 TE410P: Setting up global serial parameter...

...'a8' Wrote 'e9' but read 'a9' Wrote 'ea' but read 'aa' Wrote 'eb' but read 'ab' Wrote 'ec' but read 'ac' Wrote 'ed' but read 'ad' Wrote 'ee' but read 'ae' Wrote 'ef' but read 'af' FALC version: 00000000 TE110P: Setting up global serial parameters for T1 FALC V1.2 TE110P: Successfully initialized serial bus for card Found a Wildcard: Digium Wildcard TE110P T1/E1 Registered tone zone 0 (United States / North America) TE110P: Span configured for ESF/B8ZS Calling startup (flags is 40...

...___________________________________________________________ root@asterisk:~# /sbin/modprobe zaptel root@asterisk:~# /sbin/modprobe wct4xxp From dmesg: Zapata Telephony Interface Registered on major 196 Found TE410P at base address fc200000, remapped to e088f000 TE410P version c01a003a, burst ON FALC version: 00000005, Board ID: 00 Reg 0: 0x1b96b800 Reg 1: 0x1b96b000 Reg 2: 0x07fc07fc Reg 3: 0x00000000 Reg 4: 0x00000000 Reg 5: 0x00000000 Reg 6: 0xc01a003a Reg 7: 0x00001000 Reg 8: 0x00000000 Reg 9: 0x00ff0000 Reg 10: 0x00000000 TE410P: Launching card: 0 TE410P: Setting up global serial parameter...

...t(c) 1999-2005 Intel Corporation [42949385.960000] intel8x0_measure_ac97_clock: measured 61046 usecs [42949385.960000] intel8x0: clocking to 48000 [42949385.970000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 209 [42949385.970000] Controller version: 24 [42949385.970000] FALC version: 00000000 [42949385.970000] TE110P: Setting up global serial parameters for E1 FALC V1.2 [42949385.970000] TE110P: Successfully initialized serial bus for card [42949385.970000] Found a Wildcard: Digium Wildcard TE110P T1/E1 [42949386.000000] ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20...

...oaded ok: Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.4.10 Zaptel Echo Canceller: MG2 ACPI: PCI Interrupt 0000:18:08.0[A] -> GSI 19 (level, low) -> IRQ 98 Found TE2XXP at base address fdff0000, remapped to f8854000 TE2XXP version c01a016a, burst ON Octasic optimized! FALC version: 00000005, Board ID: 00 Reg 0: 0x375a2400 Reg 1: 0x375a2000 Reg 2: 0xffffffff Reg 3: 0x00000000 Reg 4: 0x00003101 Reg 5: 0x00000000 Reg 6: 0xc01a016a Reg 7: 0x00001300 Reg 8: 0x00000000 Reg 9: 0x00ff2031 Reg 10: 0x0000004a TE2XXP: Launching card: 0 TE2XXP: Setting up global serial parameter...

...; IRQ 16 wct4xxp 0000:02:00.0: Found TE2XXP at base address d0100000, remapped to f90d4000 wct4xxp 0000:02:00.0: DMA memory base of size 2048 at f6829000. Read: f6829400 and Write f6829000 wct4xxp 0000:02:00.0: Firmware Version: c01a0000 wct4xxp 0000:02:00.0: Burst Mode: On wct4xxp 0000:02:00.0: FALC Framer Version: 2.1 or earlier wct4xxp 0000:02:00.0: Board ID: 00 wct4xxp 0000:02:00.0: Reg 0: 0x36829400 wct4xxp 0000:02:00.0: Reg 1: 0x36829000 wct4xxp 0000:02:00.0: Reg 2: 0xd0100008 wct4xxp 0000:02:00.0: Reg 3: 0x00000000 wct4xxp 0000:02:00.0: Reg 4: 0x00000000 wct4xxp 0000:02:00.0: Reg 5: 0xd0...

...l eth1 225: 160247 0 IO-APIC-level wct2xxp NMI: 64 42 LOC: 42340 42317 ERR: 0 MIS: 0 # dmesg [...] Found TE2XXP at base address fe7ffc00, remapped to ffffc20000004c00 TE2XXP version c01a016a, burst OFF, slip debug: OFF Octasic optimized! FALC version: 00000005, Board ID: 00 Reg 0: 0x7daa5400 Reg 1: 0x7daa5000 Reg 2: 0xffffffff Reg 3: 0x00000000 Reg 4: 0x00000101 Reg 5: 0x00000000 Reg 6: 0xc01a016a Reg 7: 0x00001300 Reg 8: 0x00000000 Reg 9: 0x00ff0001 Reg 10: 0x0000004a TE2XXP: Launching card: 0 TE2XXP: Setting up global serial parameter...

...alling on channel 1 from Unused to Network HDLC ZT_CHANCONFIG failed on channel 1: Function not implemented (38) dmesg: Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.4.9.2 Zaptel Echo Canceller: MG2 ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 16 (level, low) -> IRQ 209 FALC version: 00000000 TE110P: Setting up global serial parameters for E1 FALC V1.2 TE110P: Successfully initialized serial bus for card Found a Wildcard: Digium Wildcard TE110P T1/E1 Zaptel networking not supported by this build. make data: make[1]: Entering directory `/usr/src/zaptel-1.4.9.2/menusel...

...e=dms100 group = 3 channel => 73-95 ;--channel bank-- context=fax+modem signalling=fxo_ks channel => 97-108 a snippet from dmesg: ACPI: PCI interrupt 0000:05:03.0[A] -> GSI 104 (level, low) -> IRQ 104 Found TE410P at base address f8401000, remapped to f9b98000 TE410P version c01a009b FALC version: 00000005, Board ID: 00 <registers snipped> TE410P: Launching card: 0 TE410P: Setting up global serial parameters Found a Wildcard: Wildcard TE410P-Xilinx ACPI: PCI interrupt 0000:05:02.0[A] -> GSI 100 (level, low) -> IRQ 100 Framer: DS21552, Revision: 3 (T1) Found a Wildcard: D...

...84933 0 floppy 57841 0 ext3 116297 3 jbd 69977 1 ext3 This is from /var/log/messages Mar 29 14:19:18 sepbx kernel: PCI: Assigned IRQ 9 for device 0000:03:01.0 Mar 29 14:19:18 sepbx kernel: Controller version: 24 Mar 29 14:19:18 sepbx kernel: FALC version: 00000000 Mar 29 14:19:18 sepbx kernel: TE110P: Setting up global serial parameters for E1 FALC V1.2 Mar 29 14:19:18 sepbx kernel: TE110P: Successfully initialized serial bus for card Mar 29 14:19:18 sepbx kernel: Found a Wildcard: Digium Wildcard TE110P T1/E1 Mar 29 14:19:18 sepbx kernel:...

...-> IRQ 169 Oct 20 15:20:54 redbox-ast16 kernel: Found TE2XXP at base address dfbfff80, remapped to ffffc20000022f80 Oct 20 15:20:54 redbox-ast16 kernel: TE2XXP version c01a016c, burst ON Oct 20 15:20:54 redbox-ast16 kernel: Octasic optimized! Oct 20 15:20:54 redbox-ast16 kernel: FALC version: 00000005, Board ID: 00 Oct 20 15:20:54 redbox-ast16 kernel: Reg 0: 0x056af400 Oct 20 15:20:54 redbox-ast16 kernel: Reg 1: 0x056af000 Oct 20 15:20:54 redbox-ast16 kernel: Reg 2: 0x00000000 Oct 20 15:20:54 redbox-ast16 kernel: Reg 3: 0x00000000 Oct 20 15:20:54 redbox-ast16 k...

...14: 2639 XT-PIC ide0 NMI: 0 ERR: 0 root@asterisk:/usr/src# dmesg Zapata Telephony Interface Registered on major 196 PCI: Found IRQ 3 for device 02:09.0 Found TE410P at base address f7eef800, remapped to e0978800 TE410P version c01a009b, burst ON FALC version: 00000005, Board ID: 00 Reg 0: 0x1eec6800 Reg 1: 0x1eec6000 Reg 2: 0x07fc07fc Reg 3: 0x00000000 Reg 4: 0x00000000 Reg 5: 0x00000000 Reg 6: 0xc01a009b Reg 7: 0x00001f00 Reg 8: 0x00000000 Reg 9: 0x00ff0000 Reg 10: 0x00000000 TE410P: Launching card: 0 TE410P: Setting up global ser...

Hi guys I'm Danilo Falc?o (fcon), a Sys Admin from Brazil and living in Germany. Recently I have joined Fedora QA & Infrastructure and now the CentOS project to work with Lokesh (lsm5) building RPMS for Docker and related packages. In the past years I've been working a lot with Virtualization (XEN and KVM mostly)...