Hi,
This error I got it just when I gonfigure zaptel support isdneuro 31
channels.
But if I configure zaptel to support T1 and just 24 channels I have no
problem.
########################################################################
####
#
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
#
loadzone = it
span=1,1,0,ccs,hdb3,crc4
bchan=1-23
dchan=16
bchan=17-31
[root@asterisk etc]# cat /etc/asterisk/zapata.conf
;
; Zapata telephony interface
;
; Configuration file
;
; You need to restart Asterisk to re-configure the Zap channel
; CLI> reload chan_zap.so
; will reload the configuration file,
; but not all configuration options are
; re-configured during a reload.
[channels]
signalling=pri_cpe
immediate=no
switchtype=EuroISDN
pridialplan=unknown
context=incoming
usecallerid=yes
group=1
channel => 1-23
channel => 17-31
[root@asterisk etc]# /etc/init.d/zaptel restart
Unloading zaptel hardware drivers: wcusb wctdm wcfxo wcte11xp wct1xxp
wct4xxp tor2.
Removing zaptel module: [ OK ]
Loading zaptel framework: [ OK ]
Waiting for zap to come online...OK
Loading zaptel hardware modules:Running ztcfg: ZT_CHANCONFIG failed on
channel 25: No such device or address (6)
[FAILED]
[root@asterisk etc]# dmesg
TE110P: Setting up global serial parameters for T1 FALC V1.2
TE110P: Successfully initialized serial bus for card
Found a Wildcard: Digium Wildcard TE110P T1/E1
[root@asterisk etc]# ztcfg -v
Zaptel Configuration
=====================SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
31 channels configured.
ZT_CHANCONFIG failed on channel 25: No such device or address (6)
########################################################################
####
Now I'll show how it work with 24 channels
[root@asterisk etc]# dmesg
TE110P: Setting up global serial parameters for T1 FALC V1.2
TE110P: Successfully initialized serial bus for card
Found a Wildcard: Digium Wildcard TE110P T1/E1
Registered tone zone 11 (Italy)
TE110P: Span configured for ESF/B8ZS
Calling startup (flags is 4099)
wcte1xxp: Setting yellow alarm
TE110P: Span configured for ESF/B8ZS
Calling startup (flags is 4099)
Registered tone zone 11 (Italy)
TE110P: Span configured for ESF/B8ZS
Calling startup (flags is 4099)
Registered tone zone 11 (Italy)
usbcore: registered new driver wcusb
Wildcard USB FXS Interface driver registered
TE110P: Span configured for ESF/B8ZS
Calling startup (flags is 4099)
Registered tone zone 11 (Italy)
TE110P: Span configured for ESF/B8ZS
Calling startup (flags is 4099)
Registered tone zone 11 (Italy)
And no errors.
Help,
What card do you have ? Is there are jumper setup that you can specify E1 or T1 ? E1 cards a shipped set up as T1 by default regards m.
On Friday 17 Jun 2005 17:15, Yousef Herzallah wrote:> Hi, > This error I got it just when I gonfigure zaptel support isdneuro 31 > channels. > But if I configure zaptel to support T1 and just 24 channels I have no > problem. > ######################################################################## > #### > # > # Zaptel Configuration File > # > # This file is parsed by the Zaptel Configurator, ztcfg > # > # > loadzone = it > span=1,1,0,ccs,hdb3,crc4 > bchan=1-23 > dchan=16 > bchan=17-31First, the B channels run from 1-15 & 17-31, secondly , flip the jumpers on the card. [...]