search for: esp2

.../1d18bd30/attachment.htm> -------------- next part -------------- battery.current: 0.00 battery.runtime: 4860 battery.runtime.low: 600 battery.temperature: 20.3 battery.voltage: 540.3 battery.voltage.nominal: 0.0 device.mfr: Liebert device.model: Liebert NX device.type: ups driver.name: liebert-esp2 driver.parameter.baudrate: 9600 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.4.3-2432M driver.version.internal: 0.02 input.bypass.frequency: 50.0 input.frequency.nominal: 50.0 input.frequency: 50.0 input.L1-N.voltage: 235.9 input.L1.current: 5.0 input.L2-N.vo...

Hello, 1) I'm planning on adding lots of measurements to the driver liebert-esp2 + correct support for 3-phase systems. Should I make a large patch based on the last svn head or send you the whole file? Multiple patches per change are probably not practical in this case. 2) in http://www.networkupstools.org/doc/2.2.0/new-names.html there is no crest factor variable. Crest fact...

Hi All, Attached is a patch against nut-2.4.1 that adds a driver for the ESP2 protocol, as used by the serial port found on the Liebert GXT2. This driver is mostly based on: http://www.csc.liv.ac.uk/~greg/projects/liebertserial with additional bit field information from Spiros Ioannou. liebert.c at the above url has been tested by a few people to return the correct statu...

...#39;m back and work on this driver again. First, I checked out the HEAD rev and tried the liebert driver. it gave wrong model,firmware,serial, mfr date value. caused by len variable in line 97 and after I use my ups with usb -> serial converter. these patches attached Did you try the liebert-esp2 driver in ON Battery mode ? Because If I switch my ups on battery (plugged off the input) then liebert driver force shutdown PC and shutdown UPS. Battery is full charged. UPS doesnt recieve LOW BATTERY EVENT. the shutdown function is missing from liebert-esp2 driver, this is the reason the force...

More detected parameters (attached), this time measurements for all 3 phases. I include only new discovered readings. Multipliers are wrong right now and need to be defined, and some commands are probably invalid/wrong, but most seem ok. I hope I find the time to implement those on the driver. What I'm missing is a way to discern between 1phase & 3phase (output) upses. output + read

...iable YP Harvest would equal 90 (ECRL2) and WP Harvest would equal 0 (ECRL1), all other species code var's would contain NA. I hope I made this clear enough. Thank you, Mike Current method: one line per species EBTCH1.h$YP.H <- with(EBTCH1.h,ifelse(ESP1 %in% 'YP',ECRL1,ifelse(ESP2 %in% 'YP',ECRL2, ifelse(ESP3 %in% 'YP',ECRL3,ifelse(ESP4 %in% 'YP',ECRL4,ifelse(ESP5 %in% 'YP',ECRL5, ifelse(ESP6 %in% 'YP',ECRL6,ifelse(ESP7 %in% 'YP',ECRL7,ifelse(ESP8 %in% 'YP',ECRL8, ifelse(ESP9 %in% 'YP',ECRL9,0)))))))))) DF &lt...

...33 290kb Because of potential file name issues it is installed in c:\UPS\NUT and the .\etc files have been tweaked as follows: NUT.EXE Run as a system service, NUT user has read access to everything. Also put .\BIN and .\SBIN in path. _*nut.conf*_ MODE=1 _*ups.conf*_ [UPS2] driver = liebert-esp2 port = /dev/ttyS3 desc = "UPS No 2" NUT as a service starts and stops immediately so I thought I'd try, after much investigation, at lowest common denominator and see what the Driver is reporting. In an elevated CMD shell it says cannot find a /dev/ttyS3? so obviously reading the...

hi, we working together with robert to make liebert ups with nut. there was a good revision 2431 which gives a good result for us. this revision call the driver gxt2. after that you change the name to esp2. unfortunately this version (and the current head too) contains the same bug what was previously fixed in the gxt2 branch. it'd be useful to port the fixes to the new esp2 branch too. the 2431 gxt2 version works with serial cable, but when we try with usb-serial converter than it's no long...

based on r2432, i took this with "svn diff --revision HEAD liebert-esp2.c" fixes: 1) new way to initialize model, firmware etc. variables, the strok way failed because some vars had spaces. (e.g. model "Liebert NX") 2) new multipliers for: frequency, nominal power. I get correct readings now, before I had 500 Hz, and 200VA and now it's ok for me. Te...

...t tripplite_usb >> belkinunv genericups oneac upscode2 >> bestfcom isbmex optiups upsd >> bestfortress ivtscd powercom upsmon >> bestuferrups liebert powerpanel usbhid-ups >> bestups liebert-esp2 rhino victronups >> blazer_ser masterguard richcomm_usb >> " >> >> My lsusb is showing "Bus 001 Device 008: ID 04e2:1410 Exar Corp. >> XR21V1410 USB-UART IC" >> >> And i don't know what to do next. >> >> Fatge...

...t;> belkinunv???? genericups??? oneac upscode2 >> bestfcom????? isbmex??????? optiups????????? upsd >> bestfortress? ivtscd??????? powercom???????? upsmon >> bestuferrups? liebert?????? powerpanel usbhid-ups >> bestups?????? liebert-esp2? rhino victronups >> blazer_ser??? masterguard?? richcomm_usb >> " >> >> My lsusb is showing "Bus 001 Device 008: ID 04e2:1410 Exar Corp. >> XR21V1410 USB-UART IC" >> >> And i don't know what to do...

Hi, member-list i'm searching for packages or routines to analise fisheries acoustics data. Something make import data of scientific ecosound (EK500) of paralel port, filter signal, analyse pattern of pixel fish shoals... Is there someone work with this ? If no, why dont make colective effort to do this?? (package fish_acoustic). Thanks Marcelo

...upsc. I would like you to give me the output from upsc along with the correct values you get from Multilink or the LCD. The only thing that must be wrong are the multipliers. Thanks for your effort, -Spiros -------------- next part -------------- A non-text attachment was scrubbed... Name: liebert-esp2.c Type: application/octet-stream Size: 13011 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100430/ba228faa/attachment.obj>

Hi all! I checked out the rev2366(it's stable NUT 2.4.3) and patched last liebert-esp2 revision + spiros last code. After, I used autoreconf --install and I gave the follow error msg: configure.in:86: error: possibly undefined macro: AC_C_FLEXIBLE_ARRAY_MEMBER If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. configure...

hi, it seems our latest liebertgxt2 patch still missing from the just released 2.6.0. i'm attached the patch to the 2.6.0. this patch: - add the possibility to properly shutdown the ups, - can be used through usb-serial adapter cable too. could you apply it to the source. regards. -- Levente "Si vis pacem para bellum!" -------------- next part

...>>> belkinunv genericups oneac upscode2 >>> bestfcom isbmex optiups upsd >>> bestfortress ivtscd powercom upsmon >>> bestuferrups liebert powerpanel usbhid-ups >>> bestups liebert-esp2 rhino victronups >>> blazer_ser masterguard richcomm_usb >>> " >>> >>> My lsusb is showing "Bus 001 Device 008: ID 04e2:1410 Exar Corp. >>> XR21V1410 USB-UART IC" >>> >>> And i don't know what to do n...

...belkinunv???? genericups??? oneac upscode2 >>> bestfcom????? isbmex??????? optiups upsd >>> bestfortress? ivtscd??????? powercom upsmon >>> bestuferrups? liebert?????? powerpanel usbhid-ups >>> bestups?????? liebert-esp2? rhino victronups >>> blazer_ser??? masterguard?? richcomm_usb >>> " >>> >>> My lsusb is showing "Bus 001 Device 008: ID 04e2:1410 >>> Exar Corp. >>> XR21V1410 USB-UART IC&quo...

...lkinunv genericups oneac upscode2 >>>> bestfcom isbmex optiups upsd >>>> bestfortress ivtscd powercom upsmon >>>> bestuferrups liebert powerpanel usbhid-ups >>>> bestups liebert-esp2 rhino victronups >>>> blazer_ser masterguard richcomm_usb >>>> " >>>> >>>> My lsusb is showing "Bus 001 Device 008: ID 04e2:1410 Exar Corp. >>>> XR21V1410 USB-UART IC" >>>> >>>> And i...

...0L, 0L, 0L, 6L, 90L, 0L, 0L, 0L, 0L, 0L, 0L, 4L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 30L, 0L, 7L, 1L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L), ESP2 = c(NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, "YP", "SMB", NA, NA, NA, NA, NA, NA, NA, NA, NA, "WP", NA, NA, NA, "YP", NA, "SPH", "SPH", NA, NA, "WP", NA, "YP", NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA,...