Attached. I also attach sample output from upsc OL & OB. I only tested it with 3-phase in/3-phase out ups. Thanks, -Spiros -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100421/1d18bd30/attachment.htm> -------------- next part -------------- battery.current: 0.00 battery.runtime: 4860 battery.runtime.low: 600 battery.temperature: 20.3 battery.voltage: 540.3 battery.voltage.nominal: 0.0 device.mfr: Liebert device.model: Liebert NX device.type: ups driver.name: liebert-esp2 driver.parameter.baudrate: 9600 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.4.3-2432M driver.version.internal: 0.02 input.bypass.frequency: 50.0 input.frequency.nominal: 50.0 input.frequency: 50.0 input.L1-N.voltage: 235.9 input.L1.current: 5.0 input.L2-N.voltage: 239.6 input.L2.current: 5.4 input.L3-N.voltage: 237.8 input.L3.current: 5.0 input.phases: 3 output.frequency.nominal: 50.0 output.frequency: 50.0 output.L1-N.voltage: 230.8 output.L1.crestfactor: 2.1 output.L2-N.voltage: 230.4 output.L2.crestfactor: 2.7 output.L3-N.voltage: 230.4 output.L3.crestfactor: 2.0 output.phases: 3 ups.delay.start: 900 ups.firmware: I170R150M260 ups.L1.load: 21 ups.L1.power: 1400 ups.L1.realpower: 1000 ups.L2.load: 20 ups.L2.power: 1400 ups.L2.realpower: 1000 ups.L3.load: 19 ups.L3.power: 1100 ups.L3.realpower: 1000 ups.mfr: Liebert ups.model: Liebert NX ups.power.nominal: 20000 ups.status: OL ups.temperature: 25.0 ups.type: online -------------- next part -------------- battery.current: -8.08 battery.runtime: 4800 battery.runtime.low: 600 battery.temperature: 20.5 battery.voltage: 540.4 battery.voltage.nominal: 0.0 device.mfr: Liebert device.model: Liebert NX device.type: ups driver.name: liebert-esp2 driver.parameter.baudrate: 9600 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.4.3-2432M driver.version.internal: 0.02 input.bypass.frequency: 50.0 input.frequency.nominal: 50.0 input.frequency: 0.0 input.L1-N.voltage: 0.0 input.L1.current: 0.0 input.L2-N.voltage: 0.9 input.L2.current: 0.0 input.L3-N.voltage: 0.6 input.L3.current: 0.0 input.phases: 3 output.frequency.nominal: 50.0 output.frequency: 50.0 output.L1-N.voltage: 231.1 output.L1.crestfactor: 2.1 output.L2-N.voltage: 229.5 output.L2.crestfactor: 2.7 output.L3-N.voltage: 231.1 output.L3.crestfactor: 2.0 output.phases: 3 ups.delay.start: 900 ups.firmware: I170R150M260 ups.L1.load: 21 ups.L1.power: 1400 ups.L1.realpower: 1000 ups.L2.load: 21 ups.L2.power: 1400 ups.L2.realpower: 1000 ups.L3.load: 19 ups.L3.power: 1200 ups.L3.realpower: 1000 ups.mfr: Liebert ups.model: Liebert NX ups.power.nominal: 20000 ups.status: OB DISCHRG ups.temperature: 25.0 ups.type: online -------------- next part -------------- A non-text attachment was scrubbed... Name: liebert-esp2.diff.gz Type: application/x-gzip Size: 2720 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100421/1d18bd30/attachment.bin>
Additional info to previous post. Sorry for the big patch but I'm really trying to find time between 3 jobs with the economic crisis here :-) Today's patch includes: -support for 1 & 3-phase input & output (and all combinations) -support for most input & output & bypass & nominal variables (current, power (watt+VA), voltage, frequency) Other new variables: -ups.type detection (offline, line-interactive, online) -current crest factor detection (3-phase) -battery.runtime.low detection -ups.delay.start detection (yes, I have it in 900 seconds) Values were also verified with their snmp equivalents. Best Regards, -Spiros On Wed, Apr 21, 2010 at 5:01 PM, Spiros Ioannou <sivann at gmail.com> wrote:> Attached. I also attach sample output from upsc OL & OB. > I only tested it with 3-phase in/3-phase out ups. > Thanks, > -Spiros > >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100421/dcb0cbb2/attachment.htm>
[remember to hit "Reply All"] On Apr 22, 2010, at 7:47 AM, Robert Jobbagy wrote:> I see it , I made make and make install and I hadn't liebert-esp2 > in /usr/local/ups/bin > I don't understand why.Run "autoreconf" and re-run configure.