More detected parameters (attached), this time measurements for all 3
phases. I include only new discovered readings.
Multipliers are wrong right now and need to be defined, and some commands
are probably invalid/wrong, but most seem ok. I hope I find the time to
implement those on the driver. What I'm missing is a way to discern between
1phase & 3phase (output) upses.
output + read commands attached.
Also. here are some untested ups commands (decimal, not yet tested, seem
dangerous) for the brave, not sure if relevant to nut:
ALARM_SILENCE, 1,156,2,1,1
BATTERY_TEST, 1,156,2,1,2
CANCEL, 1,156,2,1,3
OUTPUT_ON_DELAY, 1,156,2,1,4
OUTPUT_OFF_DELAY, 1,156,2,1,5
OUTPUT_OFF_MODE, 1,156,2,1,6
OUTPUT_OFF, 1,156,2,1,8
OUTPUT_ON, 1,156,2,1,9
XFER_TO_BYPASS, 1,156,2,1,10
XFER_TO_INVERTER, 1,156,2,1,11
SELF_TEST, 1,156,2,1,12
FRONT_PANEL_TEST, 1,156,2,1,13
RESET_COUNTERS, 1,156,2,1,14
RESET_SETTINGS, 1,156,2,1,15
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100411/ea9300af/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dbg-out.zip
Type: application/zip
Size: 6470 bytes
Desc: not available
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100411/ea9300af/attachment.zip>
