search for: clear

...0 T4XXP (PCI) Card 0 Span 4 RED 0 0 0 (the 4th span is not live, so that seems like a good output). Another output: /etc/init.d/dahdi status ### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource 1 PRI Clear (SWEC: MG2) 2 PRI Clear (SWEC: MG2) 3 PRI Clear (SWEC: MG2) 4 PRI Clear (SWEC: MG2) 5 PRI Clear (SWEC: MG2) 6 PRI Clear (SWEC: MG2) 7 PRI Clear (SWEC: MG2) 8 PRI Clear (SWEC: MG2)...

...same answer (no answer) 3) crc or not ? my provider says it does not matter moreover : what is supposed to show the zttool utility ? If I push "Loop" nothing happens. If I run ztcfg -v i see SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear...

...el Configuration ====================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 3: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 4: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel (Default) (Slaves: 02) Channel 03: Clear channel (Default) (Slaves: 03) Channel 04: Clear channel (Default) (Slaves: 04) Channel 05: Clear channel (Default) (Slaves: 05) Channel 06: Clear channel (Default) (Slaves: 06) Channel 07: Clear chann...

...111111222222222233 1234567890123456789012345678901 # lsmod | grep zaptel zaptel 168356 65 wcte12xp crc_ccitt 2304 1 zaptel # ztcfg -vvv Zaptel Configuration ====================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel (Default) (Slaves: 02) Channel 03: Clear channel (Default) (Slaves: 03) Channel 04: Clear channel (Default) (Slaves: 04) Channel 05: Clear channel (Default) (Slaves: 05) Channel 06: Clear channel (Default) (Slaves: 06) Channel 07: Clear chann...

...alled and configure zaptel. ZAPTEL.CONF span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone = de defaultzone=de But the output of cat /proc/zaptel/* Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) HDB3/CCS/CRC4 RECOVERING 1 WCT1/0/1 Clear (In use) RED 2 WCT1/0/2 Clear (In use) RED 3 WCT1/0/3 Clear (In use) RED 4 WCT1/0/4 Clear (In use) RED 5 WCT1/0/5 Clear (In use) RED 6 WCT1/0/6 Clear (In use) RED 7 WCT1/0/7 Clear (In use) RED 8 WCT1/0/8 Clear (In u...

...r(s): Configuration ====================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 3: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 4: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel (Default) (Slaves: 02) Channel 03: Clear channel (Default) (Slaves: 03) Channel 04: Clear channel (Default) (Slaves: 04) Channel 05: Clear channel (Default) (Slaves: 05) Channel 06: Clear channel (Default) (Slaves: 06) Channel 07: Clear chann...

...f' >>/etc/asterisk/zapata.conf Reconfiguring identified channels Zaptel Version: 1.4.11 Echo Canceller: MG2 Configuration ====================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel (Default) (Slaves: 02) Channel 03: Clear channel (Default) (Slaves: 03) Channel 04: Clear channel (Default) (Slaves: 04) Channel 05: Clear channel (Default) (Slaves: 05) Channel 06: Clear channel (Default) (Slaves: 06) Channel 07: Clear chann...

...3 span=3,3,0,esf,b8zs bchan=49-71 dchan=72 echocanceller=mg2,49-71 # Span 4 span=4,4,0,esf,b8zs bchan=73-95 dchan=96 echocanceller=mg2,73-95 # Global loadzone = us defaultzone = us Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource 1 TE2/0/1/1 Clear (In use) (SWEC: MG2) (EC: VPM450M) 2 TE2/0/1/2 Clear (In use) (SWEC: MG2) (EC: VPM450M) 3 TE2/0/1/3 Clear (In use) (SWEC: MG2) 4 TE2/0/1/4 Clear (In use) (SWEC: MG2) 5 TE2/0/1/5 Clear (In use) (SWEC: MG2) 6 TE2/0/1/6 Clear (In use) (SWEC: MG2)...

Hello. I have a TE212 configured in E1 mode. This is shown in a cat /proc/zaptel/2 and 3 (where the card is configured): cat /proc/zaptel/2 Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RED NOTOPEN 25 TE2/0/1/1 Clear 26 TE2/0/1/2 Clear 27 TE2/0/1/3 Clear 28 TE2/0/1/4 Clear 29 TE2/0/1/5 Clear 30 TE2/0/1/6 Clear 31 TE2/0/1/7 Clear 32 TE2/0/1/8 Clear 33 TE2/0/1/9 Clear 34 TE2/0/1/10 Clear 35 TE2/0/1/11 Clear...

...lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF -------------------------- and this is the proc output asterisk# cat /proc/dahdi/1 Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) B8ZS/ESF RED IRQ misses: 1 1 WCT1/0/1 Clear RED (EC: MG2) 2 WCT1/0/2 Clear RED (EC: MG2) 3 WCT1/0/3 Clear RED (EC: MG2) 4 WCT1/0/4 Clear RED (EC: MG2) 5 WCT1/0/5 Clear RED (EC: MG2) 6 WCT1/0/6 Clear RED (EC: MG2) 7 WCT1/0/7 Clear RED (EC: MG2) 8 WCT1/0/8 Clear RED (...

...s silently; but the moment I execute ztcfg, I get: ZT_SPANCONFIG failed on span 1: No such device or address (6) If I ask for more verbose errors, I get: Zaptel Configuration ====================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear...

...... error while writing audio data: : Broken pipe Here is the /proc/zaptel/1 file(seems to be correct, and log Messages too indicates the initialization is correct.): cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS ClockSource 1 WCT1/0/1 Clear 2 WCT1/0/2 Clear 3 WCT1/0/3 Clear 4 WCT1/0/4 Clear 5 WCT1/0/5 Clear 6 WCT1/0/6 Clear 7 WCT1/0/7 Clear 8 WCT1/0/8 Clear 9 WCT1/0/9 Clear 10 WCT1/0/10 Clear 11 WCT1/0/11 Clear 12 WCT1...

Hello I just updated the kernel, dahdi-linux and dahdi-tools Im also using now asterisk 1.4.26.1 And im still with a red light (not RED/YELLOW anymore): [root at catumbela ~]# /etc/rc.d/init.d/dahdi status ### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED 1 PRI CAS RED 2 PRI CAS RED 3 PRI CAS RED 4 PRI

Hi all, I am running asterisk 1.2.18, zaptel 1.2.18, libpri 1.2.4. on a suse 10.2, running kernel 2.6.18.2-34-default. The zaptel drivers are loaded on boot via /etc/init.d/zaptel, but Asterisk is unable to start. It ends with the following message: [chan_zap.so] => (Zapata Telephony w/PRI) Jun 13 13:05:41 VERBOSE[3356] logger.c: == Parsing '/etc/asterisk/zapata.conf': Found

...rxgain=0.5 txgain=0.9 immediate=no amaflags=billing adsi=no busydetect=no callprogress=no context = zapline1 switchtype = euroisdn group=1 signalling = pri_cpe channel => 1-15 channel => 17-31 cat /proc/zaptel/1 : Span 1: WPE1/0 "wanpipe1 card 0" HDB3//CRC4 1 WPE1/0/1 Clear (In use) 2 WPE1/0/2 Clear (In use) 3 WPE1/0/3 Clear (In use) 4 WPE1/0/4 Clear (In use) 5 WPE1/0/5 Clear (In use) 6 WPE1/0/6 Clear (In use) 7 WPE1/0/7 Clear (In use) 8 WPE1/0/8 Clear (In use) 9 WPE1/0/9 Clear (In...

I keep getting a red alarm when trying to setup asterisk to use my TE420B EC. I only have a blank context setup in my extensions.conf as I haven't started to config that until I can clear this red alarm. I don't have physical access to the server, so I can't go reseat the modules/card/ethernet cable, though I have hands on location that have done this a couple times already. Please help. I'm quite frustrated at this point. Thank you in advance for any help....

Im trying to install and configure sangoma ... every thing is OK but when type the command "wanrouter start" the following error apears: wan Driver not found. Thanks for any help

...= unknown context = incoming group = 2 channel => 1-15,17-31 lsmod wct4xxp 51680 31 zaptel 175904 64 [wct4xxp] ztcfg -vv Zaptel Configuration ====================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear...

...ignaling) so 1 d channels manages all the b channels in both spans. I can't seem to get it out of alarm RED, asterisk running or not doesn't make a difference. cat /proc/dahdi/1*;cat /proc/dahdi/2* Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" B8ZS/ESF RED 1 TE4/0/1/1 Clear RED 2 TE4/0/1/2 Clear RED 3 TE4/0/1/3 Clear RED 4 TE4/0/1/4 Clear RED 5 TE4/0/1/5 Clear RED 6 TE4/0/1/6 Clear RED 7 TE4/0/1/7 Clear RED 8 TE4/0/1/8 Clear RED 9 TE4/0/1/9 Clear RED 10 TE4/0/1/10 Clear R...

...fasteoi wct2xxp Can I positively conclude that my Dahdi PRI board IS NOT sharing IRQ (which is good) ? 2. What would you suggest reading the following output ? cat /proc/dahdi/2 Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" (MASTER) HDB3/CCS Timing slips: 175319 32 TE2/0/2/1 Clear (In use) (EC: VPMOCT064 - INACTIVE) 33 TE2/0/2/2 Clear (In use) (EC: VPMOCT064 - INACTIVE) 34 TE2/0/2/3 Clear (In use) (EC: VPMOCT064 - INACTIVE) 35 TE2/0/2/4 Clear (In use) (EC: VPMOCT064 - INACTIVE) 36 TE2/0/2/5 Clear (In use) (EC: VPMOCT064 - INACTIVE) 37 TE2/0/2/6...