Displaying 16 results from an estimated 16 matches for "55ma".
Did you mean:
55am
2006 Mar 06
2
Problem getting two x200p cards working on 1.2.4
...2 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 201
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at feaff000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0
+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:03.0 Class 0780: e159:0001
Subsystem: 8086:0003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- Pa...
2007 Mar 07
1
capi installation problem
...MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 201
Region 0: Memory at ff9fec00 (32-bit, non-prefetchable) [size=32]
Region 1: I/O ports at df80 [size=32]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=55mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-*
I found tutorial in http://www.asteriskguru.com/tutorials/avm_b1.html .I
have installed these packages:
*ii capiutils 3.9.20060704-1 Utilities for
CAPI-capable ISDN cards...
2014 Jan 27
1
AsteriskNOW with AX1600P card
...50ns min, 32000ns max)
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at fb001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: hisax, netjet
When I run dahdi_genconf I get the following error:
[root at pbx ~]# dahdi_genconf
Empty configuration -- no spans
/usr/sbin/dahdi_span_types: l?nea 158:...
2004 Aug 07
4
Generic X100P setup issues
...x), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at db100000 (32-bit, non-prefetchable)
[size=4K]
Region 1: I/O ports at e800 [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Is this indeed a generic X100P? If so, does anyone have any suggestions
what to look at next?
Thanks
Graham
-------------- next part --------------
An HTML attachment was scrubbed......
2017 Feb 06
0
install of audacity kills audio
...e Size: 64 bytes
Interrupt: pin A routed to IRQ 130
Region 0: Memory at 96220000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at 96210000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee003d8 Data: 0000
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
# rmmod snd_hd...
2005 Jul 17
0
wcfxo fails to find Sweex CA000022 - X100P clone
...ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ee003000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ec00 [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
But when performing a modprobe I get:
linux:/usr/src/zaptel # modprobe -v wcfxo
insmod /lib/modules/2.6.11.4-21.7-default/kernel/lib/crc-ccitt.ko
insmod /lib/modules/2.6.11.4-21.7-default/misc/zaptel.ko
in...
2006 Jan 19
1
TDM400P zttest not working
...32 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ec00 [size=256]
Region 1: Memory at e6402000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Best Regards.
Antonio.
2005 Aug 04
1
HELP! X100P IRQ conflict w/ USB
...64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at ec100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3h)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:04.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: Hewlett-Packard Company: Unknown device 1246
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParEr...
2012 Feb 25
1
Audio weirdness on CentOS 6.2 with flash?
...;TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at f6a00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee04000 Data: 4064
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint,
MSI 00
Dev...
2004 Jun 10
1
Intel 537EP chipset, revisited
...<PERR-
Latency: 64 (250ns min, 15500ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e8201000 (32-bit, non-prefetchable)
[size=4K]
Region 1: I/O ports at d800 [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
But I end up with this:
[root@gollum zaptel]# insmod wcfxo
Using /lib/modules/2.4.20/misc/wcfxo.o
/lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module para...
2004 Sep 19
4
X100p on VIA EPIA-V problems
...R-
> Latency: 32 (250ns min, 32000ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: I/O ports at ec00 [size=256]
> Region 1: Memory at e7001000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) (prog-if 00 [VGA])
> Subsystem: Trident Microsystems CyberBlade/i1
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-...
2010 Nov 09
4
Xen 3.4.3and CentOS PCIback
...64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
domU dmesg
[root@sip ~]# dmesg
Bootdata ok (command line is root=/dev/sda1 ro idebus=66 console=xvc0
selinux=0)
Linux version 2.6.18-194.17.4.el5xen (mockbuild@builder10.centos.org) (gcc
version 4.1.2 200...
2010 Nov 09
4
Xen 3.4.3and CentOS PCIback
...64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
domU dmesg
[root@sip ~]# dmesg
Bootdata ok (command line is root=/dev/sda1 ro idebus=66 console=xvc0
selinux=0)
Linux version 2.6.18-194.17.4.el5xen (mockbuild@builder10.centos.org) (gcc
version 4.1.2 200...
2014 Apr 09
2
Assistance in tracking a kernel/nouveau error
...EL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at dee60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00498 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, Phan...
2014 Apr 06
2
Assistance in tracking a kernel/nouveau error
Greetings,
I am resending this as it doesn't appear in the archives and no one
responded...maybe it got routed to /dev/null or something :-)
I have asked this question the Scientific Linux mailing list (a few
months ago) and got the suggestion I talk to the kernel guys. I pinged a
kernel guy I know, and his suggestion was to ask the Nouveau list. So
here I am. :-)
I have had my work laptop
2013 Sep 17
10
RESEND [Xen-unstable][Qemu-xen] HVM Guest reading of Expansion ROM from passthroughed PCI device returns data from emulated VGA rom
*RESEND* due to exceeding the mailinglists limit for attachment size.
Hi,
I''m trying to get secondary vga-passthrough on a HVM guest to work with a AMD HD6570 and the native kernel radeon driver and kernel modesetting.
So the guest still gets the emulated stdvga or cirrus device(used in my case here) as primary/boot vga adapter.
- When i don''t passthrough the radeon card, the