asterisk users - Jul 2005 - wcfxo fails to find Sweex CA000022 - X100P clone

Hi,
I'm trying to figure out why my Sweex CA000022 is not detected by wcfxo on
my SuSE Pro 9.3 running on a VIA EPIA SP motherboard.  The card should work as
its an Intel 82537EP based card.

When Booting the IRQ assignments for the board indicate:

Bus  Dev  Func  Vendor   Dev  Class
0    20   0     8086     1080 0703

lspci shows:

0000:00:14.0 Modem: Intel Corporation: Unknown device 1080 (rev 04) (prog-if 00
[Generic])
        Subsystem: Intel Corporation: Unknown device 1000
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (250ns min, 15500ns max), cache line size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at ee003000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at ec00 [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

But when performing a modprobe I get:

linux:/usr/src/zaptel # modprobe -v wcfxo
insmod /lib/modules/2.6.11.4-21.7-default/kernel/lib/crc-ccitt.ko
insmod /lib/modules/2.6.11.4-21.7-default/misc/zaptel.ko
install /sbin/modprobe --ignore-install wcfxo && /sbin/ztcfg
insmod /lib/modules/2.6.11.4-21.7-default/misc/wcfxo.ko
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
FATAL: Error running install command for wcfxo

Based on the info shown by the BIOS, can wcfxo correctly detect this card or
does it require changes to wcfxo_pci_tbl ?  If so, what values need to be added?

I want to get this card working so I can document the process and details on
voip-info for others to use.

Many thanks
Richard Tomlinson

_____________________________________________________________
http://www.sysgen.co.uk