Hi All I'm trying to set up a machine with a simple samba configuration. I've written the config file with no problems, however any time I attempt to connect to the shares it doesn't work. Firstly, the smb.conf: [global] netbios name = TEMPSRV workgroup = LIPSON map to guest = Bad User [ittechs] comment = Should not see me... path = /var/smb/ittechs read only = no force user = ittechs force group = ittechs guest ok = no nt acl support = no browseable = no [msoffice] comment = Microsoft Office test admin share path = /var/smb/msoffice read only = no force user = msoffice force group = msoffice guest ok = yes nt acl support = no browseable = no When connecting to the ittechs share I get asked for a username/password as expected. When entering a valid one it throws a generic error... the usual "\\tempsrv\ittechs is not accessible, you might not have permission to use the network resource" blah blah. When trying the msoffice share (which is guest ok), no prompt for a username/password appears (it shouldn't anyway), but instead of connecting to the share it displays the same generic error again, however this time with "The user name could not be found" on the end. Firstly, permissions are correctly set on the path of the shares. I've tripple cheked this then tripple checked again. $ ls -l /var/smb drwsrwsr-x 2 ittechs ittechs 4096 2008-04-30 09:28 ittechs drwsrwsr-x 2 msoffice msoffice 4096 2008-04-30 09:28 msoffice Both the ittechs and msoffice users have an smb password set, again I've checked and re-checked. $ cat /etc/samba/smbpasswd sysadmin:1000:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:B05CCCD45E8C2F5CD6F24A5559634A97:[U ]:LCT-481B292E: ittechs:1102:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:647DA7AB3D9D46FF7163D94D628F5F75:[U ]:LCT-4819D3A9: msoffice:1103:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:FA5BBDDD74D108E0E7398A06F1083DA1:[U ]:LCT-481883E1: Next, I've examined /var/log/samba/log.smbd when attempting to connect to the shares. No joy apart from this: [2008/05/02 15:40:41, 0] auth/auth_util.c:create_builtin_administrators(792) create_builtin_administrators: Failed to create Administrators [2008/05/02 15:40:41, 0] auth/auth_util.c:create_builtin_users(758) create_builtin_users: Failed to create Users I've looked this up and apparantly this is a known problem which shouldn't affect normal operation so has no relivence to my problem. Testparm also doesn't seem to see any problems with my config: $ testparm Load smb config files from /etc/samba/smb.conf Processing section "[ittechs]" Processing section "[msoffice]" Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions [global] workgroup = LIPSON netbios name = TEMPSRV map to guest = Bad User [ittechs] comment = Should not see me... path = /var/smb/ittechs force user = ittechs force group = ittechs read only = No nt acl support = No browseable = No [msoffice] comment = Microsoft Office test admin share path = /var/smb/msoffice force user = msoffice force group = msoffice read only = No guest ok = Yes nt acl support = No browseable = No The only odd thing which I have been able to discover is that winbindd *is* running. Now I read somewhere that it shouldn't be unless you're doing NT domain integration, which I'm not. This should just be a standalone server. Any hints, suggesions or help most gratefully received...
in /etc/passwd do you have a user called nobody? Tom Byrne wrote:> Hi All > > I'm trying to set up a machine with a simple samba configuration. I've > written the config file with no problems, however any time I attempt to > connect to the shares it doesn't work. Firstly, the smb.conf: > > [global] > netbios name = TEMPSRV > workgroup = LIPSON > map to guest = Bad User > > [ittechs] > comment = Should not see me... > path = /var/smb/ittechs > read only = no > force user = ittechs > force group = ittechs > guest ok = no > nt acl support = no > browseable = no > > [msoffice] > comment = Microsoft Office test admin share > path = /var/smb/msoffice > read only = no > force user = msoffice > force group = msoffice > guest ok = yes > nt acl support = no > browseable = no > > When connecting to the ittechs share I get asked for a username/password as > expected. When entering a valid one it throws a generic error... the usual > "\\tempsrv\ittechs is not accessible, you might not have permission to use > the network resource" blah blah. > > When trying the msoffice share (which is guest ok), no prompt for a > username/password appears (it shouldn't anyway), but instead of connecting > to the share it displays the same generic error again, however this time > with "The user name could not be found" on the end. > > Firstly, permissions are correctly set on the path of the shares. I've > tripple cheked this then tripple checked again. > > $ ls -l /var/smb > drwsrwsr-x 2 ittechs ittechs 4096 2008-04-30 09:28 ittechs > drwsrwsr-x 2 msoffice msoffice 4096 2008-04-30 09:28 msoffice > > Both the ittechs and msoffice users have an smb password set, again I've > checked and re-checked. > $ cat /etc/samba/smbpasswd > sysadmin:1000:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:B05CCCD45E8C2F5CD6F24A5559634A97:[U > ]:LCT-481B292E: > ittechs:1102:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:647DA7AB3D9D46FF7163D94D628F5F75:[U > ]:LCT-4819D3A9: > msoffice:1103:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:FA5BBDDD74D108E0E7398A06F1083DA1:[U > ]:LCT-481883E1: > > Next, I've examined /var/log/samba/log.smbd when attempting to connect to > the shares. No joy apart from this: > [2008/05/02 15:40:41, 0] auth/auth_util.c:create_builtin_administrators(792) > create_builtin_administrators: Failed to create Administrators > [2008/05/02 15:40:41, 0] auth/auth_util.c:create_builtin_users(758) > create_builtin_users: Failed to create Users > I've looked this up and apparantly this is a known problem which shouldn't > affect normal operation so has no relivence to my problem. > > Testparm also doesn't seem to see any problems with my config: > > $ testparm > Load smb config files from /etc/samba/smb.conf > Processing section "[ittechs]" > Processing section "[msoffice]" > Loaded services file OK. > Server role: ROLE_STANDALONE > Press enter to see a dump of your service definitions > > [global] > workgroup = LIPSON > netbios name = TEMPSRV > map to guest = Bad User > > [ittechs] > comment = Should not see me... > path = /var/smb/ittechs > force user = ittechs > force group = ittechs > read only = No > nt acl support = No > browseable = No > > [msoffice] > comment = Microsoft Office test admin share > path = /var/smb/msoffice > force user = msoffice > force group = msoffice > read only = No > guest ok = Yes > nt acl support = No > browseable = No > The only odd thing which I have been able to discover is that winbindd *is* > running. Now I read somewhere that it shouldn't be unless you're doing NT > domain integration, which I'm not. This should just be a standalone server. > > Any hints, suggesions or help most gratefully received... >