-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
You need to be the wins server for both subnets.
See the browsing chapter at
http://us2.samba.org/samba/devel/docs/html/Samba-HOWTO-Collection.html
Hope this helps.
- -Tom
Jeevan wrote:
| Hi all,
| I am new to Samba world.
| May be I am asking the question immaturely.
| I have a Linux Samba server. It has two interfaces
| 192.168.1. and 192.168.10.
| I want to use it as WINS Server.
|
| I have configuration like this
| 192.168.10.10/192.168.1.10 --> Samba Server (Also WINS Server)
| Network on one side is 10. and other it is 1. .
| Now I want to see machines on one side from the other and vice versa. All
| other machines are win 2k Machines.
| When I sniffed the packets I get the packets with error "The name
does not
| exists".
| I have not configured the samba server machine as WINS server of
machines on
| 192.168.1. network. I have configured machines on 192.168.10. network
to use
| Samba server 192.168.10.10 as WINS Server.
| My guess was the Samba server will broadcast a query on 1. netwok and
| resolve the name. But instead it is not sending any packet on 1. network.
|
| Can anybody throw some light. Please tell whether I have to do more
| homework??
|
|
| Below is my smb.conf file: -
|
|
| # This is the main Samba configuration file. You should read the
| # smb.conf(5) manual page in order to understand the options listed
| # here. Samba has a huge number of configurable options (perhaps too
| # many!) most of which are not shown in this example
| #
| # Any line which starts with a ; (semi-colon) or a # (hash)
| # is a comment and is ignored. In this example we will use a #
| # for commentry and a ; for parts of the config file that you
| # may wish to enable
| #
| # NOTE: Whenever you modify this file you should run the command
"testparm"
| # to check that you have not made any basic syntactic errors.
| #
| #======================= Global Settings
| ====================================| [global]
|
| # workgroup = NT-Domain-Name or Workgroup-Name
| workgroup = WORKGROUP
|
| # server string is the equivalent of the NT Description field
| server string = Samba Server
|
| # This option is important for security. It allows you to restrict
| # connections to machines which are on your local network. The
| # following example restricts access to two C class networks and
| # the "loopback" interface. For more examples of the syntax see
| # the smb.conf man page
| hosts allow = 192.168.1.
|
| # if you want to automatically load your printer list rather
| # than setting them up individually then you'll need this
| printcap name = /etc/printcap
| load printers = yes
|
| # It should not be necessary to spell out the print system type unless
| # yours is non-standard. Currently supported print systems include:
| # bsd, sysv, plp, lprng, aix, hpux, qnx
| printing = lprng
|
| # Uncomment this if you want a guest account, you must add this to
| /etc/passwd
| # otherwise the user "nobody" is used
| ; guest account = pcguest
|
| # this tells Samba to use a separate log file for each machine
| # that connects
| log file = /var/log/samba/%m.log
|
| # Put a capping on the size of the log files (in Kb).
| max log size = 0
|
| # Security mode. Most people will want user level security. See
| # security_level.txt for details.
| # security = user
| security = share
|
| # Use password server option only with security = server
| # The argument list may include:
| # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
| # or to auto-locate the domain controller/s
| # password server = *
| ; password server = <NT-Server-Name>
|
| # Password Level allows matching of _n_ characters of the password for
| # all combinations of upper and lower case.
| password level = 8
| username level = 8
|
| # You may wish to use password encryption. Please read
| # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
| # Do not enable this option unless you have read those documents
| encrypt passwords = yes
| smb passwd file = /etc/samba/smbpasswd
|
| # The following is needed to keep smbclient from spouting spurious errors
| # when Samba is built with support for SSL.
| ; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt
|
| # The following are needed to allow password changing from Windows to
| # update the Linux system password also.
| # NOTE: Use these with 'encrypt passwords' and 'smb passwd
file' above.
| # NOTE2: You do NOT need these to allow workstations to change only
| # the encrypted SMB passwords. They allow the Unix password
| # to be kept in sync with the SMB password.
| unix password sync = Yes
| passwd program = /usr/bin/passwd %u
| passwd chat = *New*password* %n\n *Retype*new*password* %n\n
| *passwd:*all*authentication*tokens*updated*successfully*
|
| # You can use PAM's password change control flag for Samba. If
| # enabled, then PAM will be used for password changes when requested
| # by an SMB client instead of the program listed in passwd program.
| # It should be possible to enable this without changing your passwd
| # chat parameter for most setups.
|
| pam password change = yes
|
| # Unix users can map to different SMB User names
| username map = /etc/samba/smbusers
|
| # Using the following line enables you to customise your configuration
| # on a per machine basis. The %m gets replaced with the netbios name
| # of the machine that is connecting
| ; include = /etc/samba/smb.conf.%m
|
| # This parameter will control whether or not Samba should obey PAM's
| # account and session management directives. The default behavior is
| # to use PAM for clear text authentication only and to ignore any
| # account or session management. Note that Samba always ignores PAM
| # for authentication in the case of encrypt passwords = yes
|
| obey pam restrictions = yes
|
| # Most people will find that this option gives better performance.
| # See speed.txt and the manual pages for details
| socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
|
| # Configure Samba to use multiple interfaces
| # If you have multiple network interfaces then you must list them
| # here. See the man page for details.
| interfaces = eth1 192.168.1.182/24
|
| # Configure remote browse list synchronisation here
| # request announcement to, or browse list sync from:
| # a specific host or from / to a whole subnet (see below)
| # remote browse sync = 192.168.3.25 192.168.5.255
| remote browse sync = 192.168.1.255
| # Cause this host to announce itself to local subnets here
| # remote announce = 192.168.1.255
|
| # Browser Control Options:
| # set local master to no if you don't want Samba to become a master
| # browser on your network. Otherwise the normal election rules apply
| ; local master = no
| local master = yes
|
| # OS Level determines the precedence of this server in master browser
| # elections. The default value should be reasonable
| ; os level = 33
| os level = 65
| # Domain Master specifies Samba to be the Domain Master Browser. This
| # allows Samba to collate browse lists between subnets. Don't use this
| # if you already have a Windows NT domain controller doing this job
| domain master = yes
|
| # Preferred Master causes Samba to force a local browser election on
startup
| # and gives it a slightly higher chance of winning the election
| preferred master = yes
|
| # Enable this if you want Samba to be a domain logon server for
| # Windows95 workstations.
| domain logons = yes
|
| # if you enable domain logons then you may want a per-machine or
| # per user logon script
| # run a specific logon batch file per workstation (machine)
| ; logon script = %m.bat
| # run a specific logon batch file per username
| ; logon script = %U.bat
|
| # Where to store roving profiles (only for Win95 and WinNT)
| # %L substitutes for this servers netbios name, %U is username
| # You must uncomment the [Profiles] share below
| ; logon path = \\%L\Profiles\%U
|
| # Windows Internet Name Serving Support Section:
| # WINS Support - Tells the NMBD component of Samba to enable it's WINS
| Server
| wins support = yes
|
| # WINS Server - Tells the NMBD components of Samba to be a WINS Client
| # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
| # wins server = 192.168.1.186
|
| # WINS Proxy - Tells Samba to answer name resolution queries on
| # behalf of a non WINS capable client, for this to work there must be
| # at least one WINS Server on the network. The default is NO.
| # wins proxy = yes
|
| # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
| # via DNS nslookups. The built-in default for versions 1.9.17 is yes,
| # this has been changed in version 1.9.18 to no.
| dns proxy = no
| #name resolve order = bcast
| # Case Preservation can be handy - system default is _no_
| # NOTE: These can be set on a per share basis
| ; preserve case = no
| ; short preserve case = no
| # Default case is normally upper case for all DOS files
| ; default case = lower
| # Be very careful with case sensitivity - it can break things!
| ; case sensitive = no
|
| #============================ Share Definitions
| =============================| [homes]
| comment = Home Directories
| browseable = no
| writable = yes
| valid users = %S
| create mode = 0664
| directory mode = 0775
| # If you want users samba doesn't recognize to be mapped to a guest user
| ; map to guest = bad user
|
|
| # Un-comment the following and create the netlogon directory for Domain
| Logons
| ; [netlogon]
| ; comment = Network Logon Service
| ; path = /usr/local/samba/lib/netlogon
| ; guest ok = yes
| ; writable = no
| ; share modes = no
|
|
| # Un-comment the following to provide a specific roving profile share
| # the default is to use the user's home directory
| ;[Profiles]
| ; path = /usr/local/samba/profiles
| ; browseable = no
| ; guest ok = yes
|
|
| # NOTE: If you have a BSD-style print system there is no need to
| # specifically define each individual printer
| [printers]
| comment = All Printers
| path = /var/spool/samba
| browseable = no
| # Set public = yes to allow user 'guest account' to print
| guest ok = no
| writable = no
| printable = yes
|
| # This one is useful for people to share files
| ;[tmp]
| ; comment = Temporary file space
| ; path = /tmp
| ; read only = no
| ; public = yes
|
| # A publicly accessible directory, but read only, except for people in
| # the "staff" group
| ;[public]
| ; comment = Public Stuff
| ; path = /home/samba
| ; public = yes
| ; writable = yes
| ; printable = no
| ; write list = @staff
|
| # Other examples.
| #
| # A private printer, usable only by fred. Spool data will be placed in
| fred's
| # home directory. Note that fred must have write access to the spool
| directory,
| # wherever it is.
| ;[fredsprn]
| ; comment = Fred's Printer
| ; valid users = fred
| ; path = /home/fred
| ; printer = freds_printer
| ; public = no
| ; writable = no
| ; printable = yes
|
| # A private directory, usable only by fred. Note that fred requires write
| # access to the directory.
| ;[fredsdir]
| ; comment = Fred's Service
| ; path = /usr/somewhere/private
| ; valid users = fred
| ; public = no
| ; writable = yes
| ; printable = no
|
| # a service which has a different directory for each machine that connects
| # this allows you to tailor configurations to incoming machines. You could
| # also use the %U option to tailor it by user name.
| # The %m gets replaced with the machine name that is connecting.
| ;[pchome]
| ; comment = PC Directories
| ; path = /usr/local/pc/%m
| ; public = no
| ; writable = yes
|
| # A publicly accessible directory, read/write to all users. Note that all
| files
| # created in the directory by users will be owned by the default user, so
| # any user with access can delete any other user's files. Obviously this
| # directory must be writable by the default user. Another user could of
| course
| # be specified, in which case all files would be owned by that user
instead.
| ;[public]
| ; path = /usr/somewhere/else/public
| ; public = yes
| ; only guest = yes
| ; writable = yes
| ; printable = no
|
| # The following two entries demonstrate how to share a directory so
that two
| # users can place files there that will be owned by the specific users. In
| this
| # setup, the directory should be writable by both users and should
have the
| # sticky bit set on it to prevent abuse. Obviously this could be
extended to
| # as many users as required.
| ;[myshare]
| ; comment = Mary's and Fred's stuff
| ; path = /usr/somewhere/shared
| ; valid users = mary fred
| ; public = no
| ; writable = yes
| ; printable = no
| ; create mask = 0765
|
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQE/Z9obRliD/69byygRApp6AJ9bMkJMqosKkhAWSWHsDkvDJYk6yQCeIIOW
+4jbNvuZ9zg4WucrRZO72Ms=Cuq2
-----END PGP SIGNATURE-----