>> On Nov 21, 2015, at 2:43 AM, R?bert SZAKSZ <robert at szaksz.eu> wrote: >> >> I mesured it and on DC and it shows 0 V (zero V). >> May be the information (pls. see attachment) that UPS PIN1 should bee keept HI is mandatory. Should I connect it to PC PIN4 DTR? > >Certainly possible. blazer_ser and nutdrv_qx should set DTR high and RTS low by default, but that can be adjusted.>I will try to make both cables, but UPS PIN9 (TX) doesn't answer it seems like no power on it.>> >> OR >> >> I need to follow with contact closure cable? > >If the UPS is capable of the smart protocol, I still think that is worth trying first. But it's up to you.I am not 100% sure that smart protocol is capable, because the only one place where it is mentioned is the picture I sended you. Question for contact cable http://web.archive.org/web/20100106160328/http://ups.miem.edu.ru/ups_faq5.html type 5.2.1 is to set CP[RTS] OL[CTS] LB[DCD] SD[DTR] is this correct? Best regards, Robert SZAKSZ.
On Nov 21, 2015, at 8:54 AM, R?bert SZAKSZ <robert at szaksz.eu> wrote:>> If the UPS is capable of the smart protocol, I still think that is worth trying first. But it's up to you. > I am not 100% sure that smart protocol is capable, because the only one place where it is mentioned is the picture I sended you.But your original email mentioned "UPS TxD" and "UPS RxD"...> Question for contact cable http://web.archive.org/web/20100106160328/http://ups.miem.edu.ru/ups_faq5.html type 5.2.1 is to set > CP[RTS] OL[CTS] LB[DCD] SD[DTR] is this correct?Probably. The testing procedure at http://www.networkupstools.org/docs/man/genericups.html#_testing_compatibility should help in case some of the signals need a "-". -- Charles Lepple clepple at gmail
On Nov 21, 2015, at 8:54 AM, R?bert SZAKSZ <robert at szaksz.eu> wrote:>>> If the UPS is capable of the smart protocol, I still think that is worth trying first. But it's up to you. >> I am not 100% sure that smart protocol is capable, because the only one place where it is mentioned is the picture I sended you. >But your original email mentioned "UPS TxD" and "UPS RxD"...Yes, that's the problem, I have nothing more than this peace of schema and there is mentioned TxD and RxD, but I nowhere find some information to the UPS. May be I disasemble the UPS and look inside to see the physical connection.>> Question for contact cable http://web.archive.org/web/20100106160328/http://ups.miem.edu.ru/ups_faq5.html type 5.2.1 is to set >> CP[RTS] OL[CTS] LB[DCD] SD[DTR] is this correct? >Probably. The testing procedure at http://www.networkupstools.org/docs/man/genericups.html#_testing_compatibility should help in case some of the signals need a "-".This settings is working, OL is appeared but OB not. I will try to change some settings... Thanks a lot, Robert SZAKSZ.