Nut upsuser - Apr 2011 - Problem with blazer_ser/megatec when upgrading to 2.6.0 from 2.4

Hello

First things first, thanks for great work with NUT.

For years I used Informer compact 3kVA UPS
http://www.informups.com/informer_compact.html with nut/megatec serial
driver, but it stopped working when I switched to blazer_ser with
2.6.0 upgrade.
I'm using 2.6.0 on gentoo.

Blazer_ser seems to connect with UPS, but upsmon reports driver not connected.

uname -a
Linux localhost 2.6.36-gentoo-r7 #3 SMP Tue Feb 8 18:39:54 CET 2011
x86_64 Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz GenuineIntel GNU/Linux

Configuration:
cat ups.conf | grep "#" -v
[munja]
        driver = blazer_ser
        port = /dev/ttyS0

 cat upsd.conf | grep "#" -v

LISTEN 127.0.0.1 3493

cat upsd.users | grep "#" -v

        [monuser]
                password  = #######

cat upsmon.conf | grep "#" -v

MONITOR munja at localhost 1 monuser ###### slave
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h +0"
NOTIFYCMD /usr/local/ups/bin/notifyme
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG /etc/killpower
RBWARNTIME 43200
NOCOMMWARNTIME 300
FINALDELAY 5

 /lib64/nut/blazer_ser -DDDDD -a munja -i 10
Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.6.0)
   0.000000     send_to_all: SETINFO driver.parameter.port
"/dev/ttyS0"
   0.000051     debug level is '5'
   0.100836     send_to_all: SETINFO device.type "ups"
   0.100860     send_to_all: SETINFO driver.version "2.6.0"
   0.100870     send_to_all: SETINFO driver.version.internal "1.51"
   0.100879     send_to_all: SETINFO driver.name "blazer_ser"
   0.100886     Trying megatec protocol...
   0.100970     send: Q1
   0.326638     read: (246.0 140.0 246.0 004 50.0 54.0 25.0 00001000
   0.326681     send_to_all: SETINFO input.voltage "246.0"
   0.326695     send_to_all: SETINFO input.voltage.fault "140.0"
   0.326707     send_to_all: SETINFO output.voltage "246.0"
   0.326730     send_to_all: SETINFO ups.load "4"
   0.326741     send_to_all: SETINFO input.frequency "50.0"
   0.326752     send_to_all: SETINFO battery.voltage "54.00"
   0.326763     send_to_all: SETINFO ups.temperature "25.0"
   0.326772     send_to_all: SETINFO beeper.status "disabled"
   0.326782     send_to_all: SETINFO ups.type "offline / line
interactive"
   0.326792     send_to_all: SETINFO ups.status "OL"
   0.326799     Status read in 1 tries
   0.326806     Supported UPS detected with megatec protocol
   0.326877     send: F
   0.446626     read: #230.0 0.0 048.0 50.0
   0.446660     send_to_all: SETINFO input.voltage.nominal "230"
   0.446671     send_to_all: SETINFO input.current.nominal "0.0"
   0.446683     send_to_all: SETINFO battery.voltage.nominal "48.0"
   0.446694     send_to_all: SETINFO input.frequency.nominal "50"
   0.446701     Ratings read in 1 tries
   0.446773     send: I
   0.634630     read: #                           IN03064B
   0.634659     send_to_all: SETINFO ups.mfr ""
   0.634669     send_to_all: SETINFO ups.model ""
   0.634679     send_to_all: SETINFO ups.firmware "IN03064B"
   0.634686     Vendor information read in 1 tries
   0.634693     Battery runtime will not be calculated (runtimecal not set)
   0.634702     send_to_all: SETINFO ups.delay.start "180"
   0.634711     send_to_all: SETINFO ups.delay.shutdown "30"
   0.634719     send_to_all: ADDCMD beeper.toggle
   0.634726     send_to_all: ADDCMD load.off
   0.634733     send_to_all: ADDCMD load.on
   0.634740     send_to_all: ADDCMD shutdown.return
   0.634748     send_to_all: ADDCMD shutdown.stayoff
   0.634755     send_to_all: ADDCMD shutdown.stop
   0.634763     send_to_all: ADDCMD test.battery.start
   0.634776     send_to_all: ADDCMD test.battery.start.deep
   0.634785     send_to_all: ADDCMD test.battery.start.quick
   0.634793     send_to_all: ADDCMD test.battery.stop
   0.634864     send: Q1
   0.862632     read: (246.0 140.0 246.0 004 50.0 54.0 25.0 00001000
   0.862677     send_to_all: DATAOK
   0.862793     dstate_init: sock /var/lib/nut/blazer_ser-munja open on fd 5
   0.862808     send_to_all: SETINFO driver.parameter.pollinterval
"10"
   0.862818     send_to_all: SETINFO device.mfr ""
   0.862827     send_to_all: SETINFO device.model ""
   0.862900     send: Q1
   1.090631     read: (246.0 140.0 246.0 003 50.0 54.0 25.0 00001000
   1.090670     send_to_all: SETINFO ups.load "3"
  10.871363     send: Q1
  11.098641     read: (246.0 140.0 246.0 005 50.0 54.0 25.0 00001000
  11.098681     send_to_all: SETINFO ups.load "5"


upsmon -DDDDD
Network UPS Tools upsmon 2.6.0
   0.000000     UPS: munja at localhost (slave) (power value 1)
   0.000153     Using power down flag file /etc/killpower
   0.000261     debug level is '5'
   0.001301     Trying to connect to UPS [munja at localhost]
   0.002166     Logged into UPS munja at localhost
   0.002184     pollups: munja at localhost
   0.002197     get_var: munja at localhost / status
   0.002279     Poll UPS [munja at localhost] failed - Driver not connected
   0.002290     do_notify: ntype 0x0005 (COMMBAD)
   0.002297     Communications with UPS munja at localhost lost
   5.002588     pollups: munja at localhost
   5.002617     get_var: munja at localhost / status
   5.002758     Poll UPS [munja at localhost] failed - Driver not connected
   5.002771     do_notify: ntype 0x0008 (NOCOMM)
   5.002781     UPS munja at localhost is unavailable
  10.003015     pollups: munja at localhost
  10.003048     get_var: munja at localhost / status
  10.003191     Poll UPS [munja at localhost] failed - Driver not connected
  15.003280     pollups: munja at localhost
  15.003309     get_var: munja at localhost / status
  15.003450     Poll UPS [munja at localhost] failed - Driver not connected

What am I missing?

Thanks for your time

Dushan

Citeren Dushan Tcholich <dusanc op gmail.com>:

[...]
>  /lib64/nut/blazer_ser -DDDDD -a munja -i 10
> Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.6.0)
>    0.000000     send_to_all: SETINFO driver.parameter.port
"/dev/ttyS0"
Looks fine.

[...]
> upsmon -DDDDD
> Network UPS Tools upsmon 2.6.0
>    0.000000     UPS: munja op localhost (slave) (power value 1)
>    0.000153     Using power down flag file /etc/killpower
>    0.000261     debug level is '5'
>    0.001301     Trying to connect to UPS [munja op localhost]
>    0.002166     Logged into UPS munja op localhost
>    0.002184     pollups: munja op localhost
>    0.002197     get_var: munja op localhost / status
>    0.002279     Poll UPS [munja op localhost] failed - Driver not connected
>    0.002290     do_notify: ntype 0x0005 (COMMBAD)
>    0.002297     Communications with UPS munja op localhost lost
>    5.002588     pollups: munja op localhost
>    5.002617     get_var: munja op localhost / status
>    5.002758     Poll UPS [munja op localhost] failed - Driver not connected
>    5.002771     do_notify: ntype 0x0008 (NOCOMM)
>    5.002781     UPS munja op localhost is unavailable
>   10.003015     pollups: munja op localhost
>   10.003048     get_var: munja op localhost / status
>   10.003191     Poll UPS [munja op localhost] failed - Driver not connected
>   15.003280     pollups: munja op localhost
>   15.003309     get_var: munja op localhost / status
>   15.003450     Poll UPS [munja op localhost] failed - Driver not connected
>
> What am I missing?
What is the output of 'upsd' in the syslog telling you? Note that when  
running in debug mode, a process will terminate as soon as you close  
the terminal it is running in or when you kill it with Ctrl-C.

Best regards, Arjen
-- 
Please keep list traffic on the list (off-list replies will be rejected)