search for: blazer_ser

Hello list, we've got a PowerWalker VI 1000E/RT LCD UPS and like to use it with NUT using the blazer_ser driver. For the blazer_ser driver to display percentage, one has to add battery.voltage.high and battery.voltage.low voltages to the ups config. Here's what I received from the powerwalker customer service: Battery-Low Voltage: 21.6VDC Battery Shutdown: 19.2VDC Now my questions: 1. should the...

Manufacturer: Aviem Power RT 1000-3000VA Description: Rack/Tower Intelligent Online LCD UPS. connected with serial cable. #upsc battery.voltage: 24.96 battery.voltage.low: 21.5 battery.voltage.nominal: 24.0 beeper.status: enabled device.mfr: device.model: device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyUSB1 driver.version: 2.6.3 driver.version.internal: 1.51 input.current.nominal: 5.0 input.frequency: 50.0 input.frequency.nominal: 50 input.voltage: 224.3 input.voltage.fault: 0.0 input.voltage.nominal: 220 output.voltage: 230.7 ups.de...

Hi Artronic art 1000 bl is supported partially by blazer_ser: battery.voltage: 13.40battery.voltage.nominal: 12.0 beeper.status: enabled device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.6.3 driver.version.internal: 1.51 input.current.nominal: 4.0 input.frequency: 50.1 input.frequenc...

Hi, I'm trying to get an Effekta UPS (works directly with blazer_ser) working behind a seriell to ethernet converter (Brainboxes ES-246). I've set the converter to 2400 baud, 8N1, no flow control. On the linux side I started socat and blazer_ser. All I got are timeouts after 12 seconds. I can see network traffic with tcpdump but I've no idea what to do to g...

Hello First things first, thanks for great work with NUT. For years I used Informer compact 3kVA UPS http://www.informups.com/informer_compact.html with nut/megatec serial driver, but it stopped working when I switched to blazer_ser with 2.6.0 upgrade. I'm using 2.6.0 on gentoo. Blazer_ser seems to connect with UPS, but upsmon reports driver not connected. uname -a Linux localhost 2.6.36-gentoo-r7 #3 SMP Tue Feb 8 18:39:54 CET 2011 x86_64 Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz GenuineIntel GNU/Linux Configuration: cat up...

Hi, thanks for the reply. On 2014-05-29 05:21, Charles Lepple wrote: >> Now my questions: >> 1. should the blazer_ser's high voltage be the voltage during charging >> or right after I've unplugged it from the mains? > sounds like during charging (or more accurately, during float charging at the end of the cycle): > > http://www.networkupstools.org/docs/man/blazer.html#_extra_arguments Are y...

On Feb 10, 2015, at 5:24 PM, Miroslav Todorov <miro0218 at yahoo.com> wrote: > Hi Artronic art 1000 bl is supported partially by blazer_ser: > When you say "partially supported", what is not supported? Are any of the values incorrect? -- Charles Lepple clepple at gmail

Hi, today I have tested the Zinto 800 with blazer_ser and blazer_usb on Citrix Server 7.0. Both works fine. upsc-Output (blazer_ser): battery.charge: 94 battery.voltage: 25.70 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: 24.0 device.mfr: device.model: ZINTO 800 device.type: ups driver.name: blazer_ser driver.paramet...

On Jun 2, 2014, at 12:25 PM, Andreas Lausch / TBT wrote: > > Hi, > > thanks for the reply. > > On 2014-05-29 05:21, Charles Lepple wrote: >>> Now my questions: >>> 1. should the blazer_ser's high voltage be the voltage during charging >>> or right after I've unplugged it from the mains? >> sounds like during charging (or more accurately, during float charging at the end of the cycle): >> >> http://www.networkupstools.org/docs/man/blazer.html#_extra...

The REDi Blazer 600VA (BLAZER600c) UPS found here [ro_RO]: http://www.emag.ro/ups-redi-blazer-600va-blazer600c/pd/EX5X2BBBM/ which is actually a Centralion Blazer 600VA [en_TW]: http://www.centralion.com/html/product/back-Product-ups-blazer400.htm works with the blazer_ser driver ----------shell output---------- # upsrw ups # upscmd -l ups Instant commands supported on UPS [ups]: beeper.toggle - Toggle the UPS beeper load.off - Turn off the load immediately load.on - Turn on the load immediately shutdown.return - Turn off the load and return when power is back shut...

...blem with, is connected to Windows 7 64bit, and I used the straight MSI installed from the website named NUT-Installer-2.6.5-4.msi Took me a while to find a way to get it to work, but it is ugly for now. Just starting up the service results in a NUT not working at all, and I tracked it down to the blazer_ser driver not finding the UPS. Debugging shows some problem with the communication on my serial-usb port. What I have found is, that it doesn't work until I add 4x debug flags. eg: -DDDD Here is a copy of my ups.conf: [myups] driver = blazer_ser port = com6 desc = "Proline UPS" Here...

Hi Users NUT, I want monitor a UPS of brand SMS (Sinus Double 8 KVA) using a raspberry-pi. In compatibility list, is listed to use the blazer_ser driver. I use a USB adapter to RS-232 conected in to the No-Breake. Follow the comands e confs. root at rasp:/home/pi# lsusb *Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port* Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adap...

Hello list, first of all, I'd like to report that my UPS N-Power MEV-3000LT (http://www.380v.ru/catalogue/micro-ups/mega-vision , in Russian), which is not in the hardware compatibility list, is mostly supported by the blazer_ser driver. I have very strong grounds to believe that this (and other) N-Power UPS'es are rebranded for Russian and Italian markets from their counterparts produced by Powerbank Electronics Corporation in Taiwan (http://www.powerbank.com.tw/products.php?cat=65&lang=en). I believe they are the...

Hi, I tried using 2.6.1 version for windows with a Megatec-compatible UPS and was surprised to find out it doesn't work at all. The reason for that is blazer_ser using ser_get_buf specifying a buffer large enough to accept any reasonably possible response, setting buflen accordingly. That calls select_read() and it's supposed to wait until something is available and then to read up all the data from port, returning the number of bytes read. But the wind...

...014, at 6:48 PM, Charles Lepple wrote: > On Jun 2, 2014, at 12:25 PM, Andreas Lausch / TBT wrote: > >> >> Hi, >> >> thanks for the reply. >> >> On 2014-05-29 05:21, Charles Lepple wrote: >>>> Now my questions: >>>> 1. should the blazer_ser's high voltage be the voltage during charging >>>> or right after I've unplugged it from the mains? >>> sounds like during charging (or more accurately, during float charging at the end of the cycle): >>> >>> http://www.networkupstools.org/docs/man/bl...

On 2014-06-03 00:58, Charles Lepple wrote: >> I'm pretty sure I wouldn't rely on a charge percentage derived this way ;-) It's nice to see how much time one has left, event if it's not perfectly accurate. >> As mentioned in the other thread about the tripplite_usb driver, apart from having two sets of calibration constants, one for OL and one for OB, there is no

...enericups seems to correspond to a crossed cable as shown in 5.2.1 below: > >http://web.archive.org/web/20100106160328/http://ups.miem.edu.ru/ups_faq5.html > >You might also be able to connect up the TxD and RxD lines, and use the nutdrv_qx (not available until after v2.6.5), megatec or blazer_ser drivers: > >PC UPS Description >== === =========== >2 9 TxD >3 6 RxD >5 7 Ground > >-- >Charles Lepple >clepple at gmail Thank you for your answer, so I want to try make the "smart" cable, but should I use: http://www.networkupstools.org/ups-protocols/megate...

Hi, I have an OEM of KStar UDC9101S which is Megatec protocol rs232 capable unit. So I use blazer_ser protocol=megatec /dev/ttyUSB0 with no issue to get NUT running. Please direct me what command should I issue to collect the data in order to include the UPS to device database? P.S. tryed /lib/nut/blazer_ser -DD... but no difference from a regular output has being added by the driver. -----------...

Hi There, We have this rather large-ish floor-standing Best Axxium Pro, Model Series 0650. I tried using both the "bestups" and "blazer_ser" drivers with it, but no go. So before I go any further: *Should* one of these work with it and, if not, do I have any options? (E.g.: Modify a current driver, resuscitate one that was started and abandoned, etc.? I can code.) My test platform was nut 2.4.3-1ubuntu3.2 under Ubuntu 10.04 LTS...

On 12/17/2015 10:50 PM, hyouko at gmail.com wrote: > Can you try the nutdrv_qx driver with a debug level of 5 (i.e. five D > flags, nutdrv_qx -a upsname -DDDDD )? Attached is a logfile. -------------- next part -------------- A non-text attachment was scrubbed... Name: nutdrv_qx.log Type: text/x-log Size: 5727 bytes Desc: not available URL: