Espen Berg
2011-Mar-26 09:41 UTC
[Nut-upsuser] Help with Aiptek PowerWalker VFI 1000 LCD and Konig CMP1200
Hello, I have just installed nut_2.6.0 from Debian testing, do anyone know the correct driver for this ups? The blazer_usb don't report battery-charge, the bundled software report charge and runtime. root at pluto<~>upsc powerwalker battery.voltage: 40.86 battery.voltage.nominal: 36.0 beeper.status: enabled device.mfr: device.model: HV 1K device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: /dev/bus/usb/007/002 driver.version: 2.6.0 driver.version.internal: 0.03 input.current.nominal: 4.0 input.frequency: 50.0 input.frequency.nominal: 50 input.voltage: 227.4 input.voltage.fault: 227.2 input.voltage.nominal: 220 output.voltage: 227.5 ups.delay.shutdown: 30 ups.delay.start: 180 ups.firmware: 00001907 ups.load: 15 ups.mfr: ups.model: HV 1K ups.productid: 5161 ups.status: OL BYPASS ups.temperature: 20.5 ups.type: online ups.vendorid: 0665 etwork UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.6.0) 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/bus/usb/007/002" 0.000041 debug level is '5' 0.305688 Checking device (1D6B/0002) (008/001) 0.305749 - VendorID: 1d6b 0.305756 - ProductID: 0002 0.305761 - Manufacturer: unknown 0.305765 - Product: unknown 0.305768 - Serial Number: unknown 0.305774 - Bus: 008 0.305778 Trying to match device 0.305782 Device does not match - skipping 0.305789 Checking device (067B/2303) (007/003) 0.305806 - VendorID: 067b 0.305810 - ProductID: 2303 0.305814 - Manufacturer: unknown 0.305818 - Product: unknown 0.305822 - Serial Number: unknown 0.305826 - Bus: 007 0.305829 Trying to match device 0.305833 Device does not match - skipping 0.305838 Checking device (0665/5161) (007/002) 0.325547 - VendorID: 0665 0.325562 - ProductID: 5161 0.325571 - Manufacturer: unknown 0.325580 - Product: unknown 0.325588 - Serial Number: unknown 0.325595 - Bus: 007 0.325603 Trying to match device 0.325614 Device matches 0.328556 send_to_all: SETINFO ups.vendorid "0665" 0.328574 send_to_all: SETINFO ups.productid "5161" 0.328594 send_to_all: SETINFO device.type "ups" 0.328608 send_to_all: SETINFO driver.version "2.6.0" 0.328621 send_to_all: SETINFO driver.version.internal "0.03" 0.328636 send_to_all: SETINFO driver.name "blazer_usb" 0.328649 Trying megatec protocol... 0.332547 send: Q1 0.564555 read: (227.4 227.4 227.4 012 50.0 2.27 20.5 00100001 0.564598 send_to_all: SETINFO input.voltage "227.4" 0.564618 send_to_all: SETINFO input.voltage.fault "227.4" 0.564635 send_to_all: SETINFO output.voltage "227.4" 0.564662 send_to_all: SETINFO ups.load "12" 0.564670 send_to_all: SETINFO input.frequency "50.0" 0.564677 send_to_all: SETINFO battery.voltage "2.27" 0.564683 send_to_all: SETINFO ups.temperature "20.5" 0.564688 send_to_all: SETINFO beeper.status "enabled" 0.564693 send_to_all: SETINFO ups.type "online" 0.564701 send_to_all: SETINFO ups.status "OL BYPASS" 0.564705 Status read in 1 tries 0.564709 Supported UPS detected with megatec protocol 0.568553 send: F 0.684557 read: #220.0 004 036.0 50.0 0.684582 send_to_all: SETINFO input.voltage.nominal "220" 0.684599 send_to_all: SETINFO input.current.nominal "4.0" 0.684617 send_to_all: SETINFO battery.voltage.nominal "36.0" 0.684633 send_to_all: SETINFO input.frequency.nominal "50" 0.684645 Ratings read in 1 tries 0.688555 send: I 0.876557 read: # HV 1K 00001907 0.876611 send_to_all: SETINFO ups.mfr "" 0.876658 send_to_all: SETINFO ups.model "HV 1K" 0.876680 send_to_all: SETINFO ups.firmware "00001907" 0.876699 Vendor information read in 1 tries 0.876744 Battery runtime will not be calculated (runtimecal not set) 0.876766 send_to_all: SETINFO ups.delay.start "180" 0.876787 send_to_all: SETINFO ups.delay.shutdown "30" 0.876806 send_to_all: ADDCMD beeper.toggle 0.876826 send_to_all: ADDCMD load.off 0.876872 send_to_all: ADDCMD load.on 0.876893 send_to_all: ADDCMD shutdown.return 0.876912 send_to_all: ADDCMD shutdown.stayoff 0.876932 send_to_all: ADDCMD shutdown.stop 0.876952 send_to_all: ADDCMD test.battery.start 0.876971 send_to_all: ADDCMD test.battery.start.deep 0.877018 send_to_all: ADDCMD test.battery.start.quick 0.877039 send_to_all: ADDCMD test.battery.stop 0.880555 send: Q1 1.124557 read: (226.3 227.4 227.3 014 50.0 2.28 20.5 00100001 1.124617 send_to_all: SETINFO input.voltage "226.3" 1.124665 send_to_all: SETINFO output.voltage "227.3" 1.124688 send_to_all: SETINFO ups.load "14" 1.124713 send_to_all: SETINFO battery.voltage "41.04" 1.124767 send_to_all: DATAOK 1.124843 dstate_init: sock /var/run/nut/blazer_usb-powerwalker open on fd 5 1.124867 send_to_all: SETINFO driver.parameter.pollinterval "2" 1.124888 send_to_all: SETINFO device.mfr "" 1.124910 send_to_all: SETINFO device.model "HV 1K" 1.128561 send: Q1 1.364561 read: (227.2 227.2 227.2 013 50.0 2.28 20.5 00100001 1.364618 send_to_all: SETINFO input.voltage "227.2" 1.364666 send_to_all: SETINFO input.voltage.fault "227.2" 1.364689 send_to_all: SETINFO output.voltage "227.2" 1.364712 send_to_all: SETINFO ups.load "13" 3.129591 send: Q1 3.356592 read: (227.8 227.5 227.4 014 50.0 2.27 20.5 00100001 3.356621 send_to_all: SETINFO input.voltage "227.8" 3.356640 send_to_all: SETINFO input.voltage.fault "227.5" 3.356657 send_to_all: SETINFO output.voltage "227.4" 3.356676 send_to_all: SETINFO ups.load "14" 3.356697 send_to_all: SETINFO battery.voltage "40.86" 5.129627 send: Q1 5.356620 read: (227.3 227.3 227.3 013 50.0 2.27 20.5 00100001 5.356683 send_to_all: SETINFO input.voltage "227.3" 5.356728 send_to_all: SETINFO input.voltage.fault "227.3" 5.356751 send_to_all: SETINFO output.voltage "227.3" 5.356775 send_to_all: SETINFO ups.load "13" 7.129651 send: Q1 7.356650 read: (227.3 227.2 226.3 014 50.0 2.27 20.5 00100001 7.356718 send_to_all: SETINFO input.voltage.fault "227.2" 7.356761 send_to_all: SETINFO output.voltage "226.3" 7.356784 send_to_all: SETINFO ups.load "14" 9.128676 send: Q1 9.364680 read: (227.7 228.1 228.2 013 50.0 2.28 20.5 00100001 9.364714 send_to_all: SETINFO input.voltage "227.7" 9.364733 send_to_all: SETINFO input.voltage.fault "228.1" 9.364751 send_to_all: SETINFO output.voltage "228.2" 9.364770 send_to_all: SETINFO ups.load "13" 9.364788 send_to_all: SETINFO battery.voltage "41.04" I also have a Konig CMP1200, on blazer_ser, it dosent report charge or runtime either. root at pluto<~>upsc konig battery.voltage: 27.10 battery.voltage.nominal: 23.5 beeper.status: disabled device.mfr: KONIG COMPUTER device.model: CMP1200 device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyD0 driver.version: 2.6.0 driver.version.internal: 1.51 input.current.nominal: 6.0 input.frequency: 50.0 input.frequency.nominal: 50 input.voltage: 226.0 input.voltage.fault: 165.0 input.voltage.nominal: 220 output.voltage: 226.0 ups.alarm: Shutdown imminent! ups.delay.shutdown: 30 ups.delay.start: 180 ups.firmware: VER4.00C ups.load: 0 ups.mfr: KONIG COMPUTER ups.model: CMP1200 ups.status: ALARM OL ups.temperature: 0.0 ups.type: offline / line interactive Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.6.0) 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyD0" 0.000059 debug level is '5' 0.100545 send_to_all: SETINFO device.type "ups" 0.100601 send_to_all: SETINFO driver.version "2.6.0" 0.100645 send_to_all: SETINFO driver.version.internal "1.51" 0.100666 send_to_all: SETINFO driver.name "blazer_ser" 0.100686 Trying megatec protocol... 0.100747 send: Q1 0.349886 read: (226.0 165.0 226.0 000 50.0 27.1 00.0 00001010 0.349960 send_to_all: SETINFO input.voltage "226.0" 0.349985 send_to_all: SETINFO input.voltage.fault "165.0" 0.350007 send_to_all: SETINFO output.voltage "226.0" 0.350039 send_to_all: SETINFO ups.load "0" 0.350090 send_to_all: SETINFO input.frequency "50.0" 0.350116 send_to_all: SETINFO battery.voltage "27.10" 0.350138 send_to_all: SETINFO ups.temperature "0.0" 0.350158 send_to_all: SETINFO beeper.status "disabled" 0.350179 send_to_all: SETINFO ups.type "offline / line interactive" 0.350232 send_to_all: SETINFO ups.alarm "Shutdown imminent!" 0.350254 send_to_all: SETINFO ups.status "ALARM OL" 0.350274 Status read in 1 tries 0.350292 Supported UPS detected with megatec protocol 0.350315 send: F 0.481871 read: #220.0 006 23.50 50.0 0.481924 send_to_all: SETINFO input.voltage.nominal "220" 0.481967 send_to_all: SETINFO input.current.nominal "6.0" 0.481990 send_to_all: SETINFO battery.voltage.nominal "23.5" 0.482013 send_to_all: SETINFO input.frequency.nominal "50" 0.482058 Ratings read in 1 tries 0.482082 send: I 0.693878 read: #KONIG COMPUTER CMP1200 VER4.00C 0.693930 send_to_all: SETINFO ups.mfr "KONIG COMPUTER" 0.693970 send_to_all: SETINFO ups.model "CMP1200" 0.693992 send_to_all: SETINFO ups.firmware "VER4.00C" 0.694011 Vendor information read in 1 tries 0.694056 Battery runtime will not be calculated (runtimecal not set) 0.694078 send_to_all: SETINFO ups.delay.start "180" 0.694099 send_to_all: SETINFO ups.delay.shutdown "30" 0.694119 send_to_all: ADDCMD beeper.toggle 0.694139 send_to_all: ADDCMD load.off 0.694183 send_to_all: ADDCMD load.on 0.694204 send_to_all: ADDCMD shutdown.return 0.694223 send_to_all: ADDCMD shutdown.stayoff 0.694243 send_to_all: ADDCMD shutdown.stop 0.694262 send_to_all: ADDCMD test.battery.start 0.694282 send_to_all: ADDCMD test.battery.start.deep 0.694328 send_to_all: ADDCMD test.battery.start.quick 0.694349 send_to_all: ADDCMD test.battery.stop 0.694378 send: Q1 0.925881 read: (223.0 165.0 223.0 000 50.0 27.1 00.0 00001010 0.925935 send_to_all: SETINFO input.voltage "223.0" 0.925974 send_to_all: SETINFO output.voltage "223.0" 0.926004 send_to_all: DATAOK 0.926068 dstate_init: sock /var/run/nut/blazer_ser-konig open on fd 5 0.926119 send_to_all: SETINFO driver.parameter.pollinterval "2" 0.926142 send_to_all: SETINFO device.mfr "KONIG COMPUTER" 0.926163 send_to_all: SETINFO device.model "CMP1200" 0.926194 send: Q1 1.165917 read: (223.0 165.0 223.0 000 50.0 27.1 00.0 00001010 2.929872 send: Q1 3.165880 read: (226.0 165.0 226.0 000 50.0 27.1 00.0 00001010 3.165936 send_to_all: SETINFO input.voltage "226.0" 3.165975 send_to_all: SETINFO output.voltage "226.0" 4.929879 send: Q1 5.165882 read: (226.0 165.0 226.0 000 50.2 27.1 00.0 00001010 5.165952 send_to_all: SETINFO input.frequency "50.2" 6.929878 send: Q1 7.165881 read: (223.0 165.0 223.0 000 50.0 27.1 00.0 00001010 7.165937 send_to_all: SETINFO input.voltage "223.0" 7.165975 send_to_all: SETINFO output.voltage "223.0" 7.165999 send_to_all: SETINFO input.frequency "50.0" 8.929892 send: Q1 9.165883 read: (226.0 165.0 226.0 000 50.0 27.1 00.0 00001010 9.165942 send_to_all: SETINFO input.voltage "226.0" 9.165978 send_to_all: SETINFO output.voltage "226.0" 10.929875 send: Q1 11.165879 read: (220.0 165.0 220.0 000 50.0 27.1 00.0 00001010 11.165936 send_to_all: SETINFO input.voltage "220.0" 11.165975 send_to_all: SETINFO output.voltage "220.0" 12.929869 send: Q1 13.165882 read: (220.0 165.0 220.0 000 50.0 27.1 00.0 00001010 Regards Espen -- Gratis e-post fra Monsterpost.no, sjekk www.monsterpost.no :)
Arjen de Korte
2011-Mar-26 14:00 UTC
[Nut-upsuser] Help with Aiptek PowerWalker VFI 1000 LCD and Konig CMP1200
Citeren Espen Berg <espen op halden.by>:> I have just installed nut_2.6.0 from Debian testing, do anyone know > the correct driver for this ups? The blazer_usb don't report > battery-charge, the bundled software report charge and runtime.The UPS doesn't report battery charge and/or runtime. See the paragraph BATTERY CHARGE in 'man 8 blazer' for more information. Best regards, Arjen -- Please keep list traffic on the list (off-list replies will be rejected)