Hi James,
thanks for the feedback. The output you get seems generally fine,
except for battery.voltage: 0.0 and output.voltage: 164.0; these
values are consistent with what Phil DeBoest reported.
Upsmon normally executes the shutdown command when you reach the "low
battery" threshold, as decided by the UPS and/or driver. It does so by
looking at ups.status, not battery.charge.
-- Peter
James Pooton wrote:>
> The SVN worked fine for me :) Results below. Just curious, given the data
> the Tripp Lite LCD UPSs currently return, when does upsmon decide it's
time
> to execute the shutdown command? Is it just when it's on battery alert
and
> finally reaches some internal low threshold of battery.charge?
>
> Thanks for all your work...
>
> -James
>
> [root@blackhole bin]# /usr/local/ups/bin/upsc ups@127.0.0.1
> battery.charge: 100
> battery.type: PbAc
> battery.voltage: 0.0
> battery.voltage.nominal: 24.0
> driver.name: newhidups
> driver.parameter.port: auto
> driver.version: 2.1.0
> driver.version.data: TrippLite HID 0.1 (experimental)
> driver.version.internal: 0.30
> input.frequency: 59.7
> input.voltage: 118.8
> input.voltage.nominal: 120
> output.frequency.nominal: 60
> output.voltage: 164.0
> output.voltage.nominal: 120
> ups.beeper.status: enabled
> ups.delay.reboot: 65535
> ups.delay.shutdown: 65535
> ups.mfr: Tripp Lite
> ups.model: TRIPP LITE UPS
> ups.power.nominal: 1200
> ups.serial: 692199 B
> ups.status: OL CHRG
>
> -James
>
> -----Original Message-----
> From: Peter Selinger [mailto:selinger@mathstat.dal.ca]
> Sent: Monday, August 07, 2006 4:40 PM
> To: James Pooton
> Subject: Re: Tripp Lite LCD models w/ NUT
>
> Hi James,
>
> thanks for your message! I think I have fixed this USB report
> descriptor bug now (as per my previous message). Let me know if it's
> working! Thanks, -- Peter
>
> James Pooton wrote:
> >
> > Hello!
> >
> >
> >
> > Thanks for all your help with NUT! :-) One of your messages on the
NUT
> > mailing list saved me today. Just wanted to give you thanks, and an
FYI
> > that I took in 6 new Tripp Lite 1500 LCD systems this week and all of
them
> > had the USB report descriptor size bug (Unable to get Report
descriptor
> > (-75)). I contacted Tripp Lite about it, and the rep took my
"report" but
> > said there were no firmware updates available or in the works that he
saw.
> > Someday if you're able to make the workaround part of the source
it would
> be
> > greatly appreciated by those of us with bug ridden UPSs :-)
> >
> >
> >
> > Thanks again!
> >
> >
> >
> > -james
>
