Hi folks, has anyone been successful in getting a Mustek PowerMust 500 to talk to nut? All my attempts (tried "mustek" and "powermust" as drivers) have been unsuccessful so far. Thanks for any clues. Sascha -- http://yoyodyne.ath.cx
On 8/4/06, Sascha Wildner <saw@online.de> wrote:> Hi folks, > > has anyone been successful in getting a Mustek PowerMust 500 to talk to > nut? All my attempts (tried "mustek" and "powermust" as drivers) have > been unsuccessful so far.What's the software that comes bundled with it? Is it "Commander Pro" or "WinPower"? Are you trying to use it via the serial port or USB? (Only the serial port is supported.) -- Carlos Rodrigues
On 8/5/06, Sascha Wildner <saw@online.de> wrote:> I did what you said. But all I got was: > > yoyodyne# megatec -a powermust500 -DDD > Network UPS Tools - Megatec protocol driver 1.4 (2.0.4) > Carlos Rodrigues (c) 2003-2006 >[...]> > My ups.conf: > > [powermust500] > driver = megatec > port = /dev/cuaa0 > > Would trying out the development version make a difference (don't have > svn at hand at the moment)?No need to. If you are indeed using the correct serial port, then the UPS doesn't talk the megatec protocol. Maybe it is supported by some other driver, maybe "genericups". -- Carlos Rodrigues